Question about Canon PIXMA MX700 All-In-One InkJet Printer

1 Answer

Error code 6502

My Pixma M700 is a couple of months old. It was working fine and then one day, after printing okay it stopped and showed the error code 6502. The ink tank was half full. I tried replacing it with a brand new ink tank but it still shows the same error and will not print.

Posted by on

  • csmitthrc Dec 19, 2008

    There is no resume button on the mx700

  • Anonymous Mar 27, 2014

    The printer was working fine for several months. Low ink warnings continued to come on after replacing with Brand New Correct inks TWICE. NOW, code

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 170 Answers

1-- With the printer unplugged, remove the ink cart to the right ,
2--Plug in the printer ,Press the POWER button, Do not release the POWER button ,and then press the RESUME button twice in succession .Now release the POWER button ,press the RESUME button 4 times .
3--The beeper may sound once ,Then Unplug the printer ,then power back up and reset the printer electronics ,open the printer and this process is finished. I believe this should take care of your issue, it's basically a cold reset for the printer, Give it a shot...

Posted on May 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Changed ink cartridge and now have error 6502 - have no clue what that means, but it won't print - yellow and green light alternate flashing


Error Code 6502 appears generally after changing a cartridge.

Solution:
  1. Unplug the printer.
  2. Remove the faulty Cartridge
  3. Plug in the printer and press and hold power button
  4. Keep it held down. Press Resume twice, and this should reset the fault.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

Feb 12, 2011 | Canon PIXMA iP3500 Printer

1 Answer

Canon pixma ip4300 Stoped working, light flashes 19 times and error code 6502 displayed on screen Help please?


Hello
Try
Error Code 6502 appears generally after chaging a cartridge.

Solution:
  1. Unplug the printer.
  2. Remove the faulty Cartridge
  3. Plug in the printer and press and hold power button
  4. Keep it held down. Press Resume twice, and this should reset the fault.

All Best: Pineworks

Oct 31, 2009 | Canon PIXMA MP830 All-In-One InkJet...

2 Answers

ERROR 6502


Error 6502 (Ink tank position sensor error) the sensor is receiving too much light. Possible causes are:
1. The printer cover is open and the sensor is exposed to the light
2. The ink tank LEDs are busted
3. Sensor or its wire connection to the logic board is busted or disconnected

Solution:
1. Close the printer cover
2. Possible ink tank replacement
3. Change sensor or repair disconnected wires

Sep 25, 2009 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Canon MP630 error code 6502


Error 6502 is the ink tank position sensor error. Basically means the printer can't see the inks. Try reseating them. If this fails you need to send it back.

Jun 02, 2009 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Canon PIXMA MP500 - "Error Code 6502"


Try holding the stop/reset button down for 10 seconds to see if the error clears. If it does not repost your error message to the forum.

Jan 28, 2009 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Error 6502 PIXMA iX 4000 with CISS


Ok there
Error Code 6502 appears generally after chaging a cartridge.

Solution:
  1. Unplug the printer.
  2. Remove the faulty Cartridge
  3. Plug in the printer and press and hold power button
  4. Keep it held down. Press Resume twice, and this should reset the fault.

All Best: Pineworks

Jan 07, 2009 | OEM Systems PIXMA iP3300 Photo Printer

3 Answers

Canon IP4500 service error code 6502


canon pixma 4500 service error 6502

Jul 15, 2008 | Printers & Copiers

1 Answer

Canon mp830 error 6502


Try cleaning the print heads with the Canon software.

Jul 07, 2008 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Error code 6502


This might work
Error Code 6502 appears generally after chaging a cartridge.

Solution:
  1. Unplug the printer.
  2. Remove the faulty Cartridge
  3. Plug in the printer and press and hold power button
  4. Keep it held down. Press Resume twice, and this should reset the fault.

All Best: Pineworks

Jun 14, 2008 | Canon Pixma MP500 All-In-One InkJet...

2 Answers

Error code 6502 on MP510


why error 6502..........?????
Help me pls.........!!!!!!!!!!!

Feb 26, 2008 | Canon PIXMA MP600 all-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MX700 All-In-One InkJet Printer Logo

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...