Question about Home Theater Systems

3 Answers

My DVP5960 When I turn on my player I get a popping sound from my television

Posted by on

  • sundown007 May 12, 2008

    Thanks a lot. Just wanted to be sure, first time using HDMI connection for television.not a continuing pop just a pop when it's loading an another when it starts to play.couldn't find anything in the owner's manuals. Thanks again.

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 166 Answers

Hello there.

If you are using the HDMI connection then its well known that the tv gives an audible 'pop' when changing resolution.

This is normal.

If this is not what you are experiencing please write back.

Posted on May 11, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Is it a continuous Pop or one or a couple big pops?

Also does this happen on all inputs such as the cable, antenna, vcr, dvd player, etc. or on specific ones.

By providing me with this information, I will be able to narrow down your problem. thanks

Posted on May 11, 2008

  • Benjamin Patri
    Benjamin Patri May 11, 2008

    A few ideas to start with:
    i. "...volume control raises and lowers the noise level..." indicates the source of the noise is before the audio amplifier;
    ii. "...noise is present in the earphones..." tells us that it is not the speakers;
    iii. "...with a cable input or a DVI input..." shows that it is not the tuner;
    iv. "...SRS WOW on or off makes no difference..." is not 100% indicative that the SRS is not the issue, it could still be at fault;
    v. "...switching off by remote and noise continues..." - tells us that possibly the source of the noise is a board that gets its B+ also from the standby power;
    vi. the "...popping sound..." could very well be a capacitor charging/discharging;
    vii. if the "...popping sound..."
    is continuous and fairly close to one another, then it could be
    "motorboating", a low frequency oscillation/feedback which again could
    be caused by a leaky capacitor;
    viii. it is unlikely that the
    problem is a cold solder or loose connection since if ever, the problem
    would be intermittent or no sound at all; and/or
    ix. it is also possible that signal/audio wires (shielded wires) are crossing over unshielded/power/noisy wires.

    thanks to a previous posted thread by Benimur in which a person is experiencing a similar problem

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 652 Answers

Check the connection from DVD to TV

Posted on May 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a phillips hts5560 home theatre system and im getting no sound through the speakers! I have tried everything the blue ray player workz but no sound at all through speakers can anyone help?


Hi Candice, Does your blue-ray DVD player have volume control as well as your television, I have blue-ray DVD with volume control as well as the television volume control.... I have the television volume turned up full and control the volume through my blue-ray DVD.... Hope this helps... CHEERS...

Apr 16, 2016 | home Home Theater Systems

1 Answer

Hs 200 harman kardon stop working


Check the capasitors in the power supply. These often have a popped top surface, not flat like normal. These need to be changed. It can be as many as 10-15 bad ones.

Feb 14, 2015 | Harman Kardon HS 200 Theater System

1 Answer

I need help with volume and popping and cracking in the speakers. It's a new system and it's only plugged into my record player.


You are most likely going to need a preamp to go between your home theater and record player. The popping and hissing is usually a grounding issue. You will have to ground your system properly to get rid of this.

Dec 21, 2014 | RCA Home Theater Systems

1 Answer

I cant get my lg ht303su system to play sound from my television how do i do this?


Connect the RCA cables ( red, white, yellow cables) to the necessary jacks o the DVD player and tv..the DVD player should have an "AUX" input amongst the other inputs eg DVD,USB etc..this allows you to play sound from the TV through the DVD HT

Jan 05, 2013 | LG HT303SU Theater System

1 Answer

RCA DVD Home Theater System popping noise now wont turn on


if no any power indicator the first place to be check is the power supply where in the fuse get blow. if the fuse blown with darkened color that was mean has shortened line, might the amplifier circuit get damaged that cause of popping before it totally down.check for bad amplifier ic and shorted diodes.

Jul 26, 2012 | RCA Rtd315w Dvd Home Theater System...

1 Answer

Is there anyway to play my normal television sound through my surround sound insted of my television?


Hi.What kind of audio output connections does your TV have?
If it has mini jack output, you should use this cable:12_15_2011_7_49_41_pm.jpg
If the output is RCA you should use this one:
12_15_2011_7_56_22_pm.jpg
Hope this helps.

Dec 15, 2011 | Sanyo Home Theater Systems

1 Answer

Panasonic home theatre keeps making a popping


try cleaning all your connections for your speakers with isopropyl alcohol and a q-tip, if no luck it could be an internal problem

Jan 09, 2010 | Panasonic Home Theater System System

1 Answer

Surround Sound system ''popping'' through speakers


if you have left the stereo on for long periods of time heat builds up in the electronic circuts and it starts buzzing and popping through the speakers. What I would do is turn it off and let it cool down for a couple hours and it should be fine for a whole or just buy a new surround system.

Apr 22, 2009 | Home Theater Systems

1 Answer

Help getting sound from New Sony LCD Television Model XV HTD520 DVD Player with Surround Sound S HTD520


While I could not find it in the manual, I found that you must
go to the menu, open Sound Options and set Speakers to "Fixed".

Note: If you turn off the Surround Sound or DVD player combination you must then go back to the menu and turn the speakers back to Televsion.

Jul 21, 2008 | Home Theater Systems

2 Answers

Protect


The protect message indicates that a problem was found in the output stage of the amplifier. Unless this gets repaired, nothing will work. As a verification that the speakers or the wires are not the problem, unplug all of the speakers and try again. If protect still is displayed, the problem is inside the unit.
Dan

Apr 09, 2008 | Sony DAV-S400 System

Not finding what you are looking for?
Home Theater Systems Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Theater Systems Experts

Gyula Lacz

Level 3 Expert

482 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

kakima

Level 3 Expert

96627 Answers

Are you a Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...