Question about Electrolux Trilobite Vacuum

3 Answers

Trilobite Error 7

My Trilobite will start, run, and clean until it gets into a backup situation. It then gets an error code 7 "Check the Bumper". All seems well visually, can someone help me please?

Thank You

Posted by on

  • 5 more comments 
  • Bikergar May 12, 2008

    How does the bumper come off.

  • Anonymous Dec 27, 2008

    How does the bumper comes off



  • Anonymous Feb 06, 2009

    Sent back to Electrolux for repair. They replaced bumper and processor card but the error still persists. So I have decided to dump it and not buy Electrolux again as the after sales support is hopeless.

  • Anonymous Feb 18, 2009

    Mine does not even move forward and the battery indicator shows that the battery can still be charging although after many rounds of charging with the indicator stating "done"

  • Anonymous Feb 27, 2009

    Try getting the batteries replaced as weak batteries do affect some errors.

  • Anonymous Feb 27, 2009

    Try getting the batteries replaced as weak batteries can cause errors

  • yimwc Feb 27, 2009

    Has anyone tried replacing the batteries for error #07? Not sure if it works. If anyone has succeeded with solving this problem, please share it.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

As weak batteries may be the culprit, try changing them and see if it works

Posted on Feb 27, 2009

  • yimwc Feb 27, 2009

    Please post a reply if this helps

×

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Hi,

If you can't find proper service from your country, please send your Trilobite to Finland
So have done some other people around europe too! :)
I am a professional with Trilobite robot's.
Mostly error 7 will be repaid for arroud 200 euro plus delivery costs

Address for service is:
Oy JVV Tekniikka Ab
Mestarintie 43
SF-28800 PORI
tel. int +358 400 126597
remember add your return address with short description of fault and put the charged in the parcel

Posted on Sep 07, 2009

  • jariv Sep 07, 2009

    Not a battery fault!

  • marlboro20 Oct 07, 2010

    i know alot about the Trilobite , just ask me

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 65 Answers

Try taking the bumper off, remove the obstuction that is blocking the sensor, replace bumper and voila!

Posted on May 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Contact service centre in Perth WA


Hi There,
Alec from VacuumSpot here. If you give Electrolux head office a call on 1300366366 they will let you know the number of an agent near to you.

Oct 29, 2012 | Electrolux Trilobite Vacuum

1 Answer

After running a short time ok, it starts going in circles, then gives error code 9


The nine-beep error means you have a dirty or defective bumper sensor. You might want to start by spraying compressed air around the sensors to move and dirt or debris that are causing the vacuum to think it is jammed against a wall or furniture.

Feb 28, 2011 | iRobot Roomba 560 Robotic Vacuum

2 Answers

Bumper switches on continues


Hi. An IR LED is damaged. You can replace the sensor or purchase a complete cliff sensor bumper.

May 15, 2010 | Roomba Robotic Floor Bagless Vacuum

1 Answer

Trilobite (red version) Error Code 3


If you can't find proper service from your country, please send your Trilobite to Finland
So have done some other people around europe too! :)
I am a professional with Trilobite robot's.
No service manual available, even for me...
For error 3 If you can't find proper service from your country, please send your Trilobite to Finland
So have done some other people around europe too! :)
I am a professional with Trilobite robot's.
No service manual available, even for me...
For error thre is several possible reasons.
Check first all visible, is the surface clean and no visible damages.
If OK, yuo must sent it to service.
Br Jari Viitanen
Address for service is:
Oy JVV Tekniikka Ab
Mestarintie 43
SF-28800 PORI
tel. int +358 400 126597
remember add your return address with short description of fault and put the charged in the parcel
Address for service is:
Oy JVV Tekniikka Ab
Mestarintie 43
SF-28800 PORI
tel. int +358 400 126597
remember add your return address with short description of fault and put the charged in the parcel

Nov 25, 2009 | Electrolux Trilobite Vacuum

1 Answer

Connecting to charge station


Hi,

If you can't find proper service from your country, please send your Trilobite to Finland
So have done some other people around europe too! :)
I am a professional with Trilobite robot's.
Mostly error's will be repaid for arroud 200 euro plus delivery costs

Address for service is:
Oy JVV Tekniikka Ab
Mestarintie 43
SF-28800 PORI
tel. int +358 400 126597
remember add your return address with short description of fault and put the charged in the parcel

Aug 04, 2009 | Electrolux Trilobite Vacuum

1 Answer

My Trilobite starts and runs for about 3 minutes (on plain parquet floor) when it suddenly stops with error 5. One is supposed to clean the role. I did it but the problem remains.


Hi,

If you can't find proper service from your country, please send your Trilobite to Finland
So have done some other people around europe too! :)
I am a professional with Trilobite robot's.
Mostly error 7 will be repaid for arroud 200 euro plus delivery costs

Address for service is:
Oy JVV Tekniikka Ab
Mestarintie 43
SF-28800 PORI
tel. int +358 400 126597
remember add your return address with short description of fault and put the charged in the parcel

Jun 29, 2009 | Electrolux Trilobite Vacuum

2 Answers

IT WILL ONLY RUN IN A CIRCLE AS IF IT IS IN SPOT MODE


Try blowing out the unit, particularly the bumper, with compressed air. Clean off the little windows on the underside of the bumper-- these are the cliff sensors. Then, most importantly, tap the bumper with your hand about half a dozen times to knock loose anything that's stuck. If the issue persists, give a call to customer support and let them know you're having the 9-beep errror.

May 19, 2009 | iRobot Roomba 550 Vacuum

1 Answer

Trilobite robot Frozen beater brush continual running error


If you can't find proper service from your country, please send your Trilobite to Finland
So have done some other people around europe too! :)
I am a professional with Trilobite robot's.
No service manual available, even for me...
For error 10 (power failure) there is several possible "burned" component's. 8 to 10 can be in same time faulty
Different in every time
After two weeks investigation I usually put totaly new prosessor card.

Address for service is:
Oy JVV Tekniikka Ab
Mestarintie 43
SF-28800 PORI
tel. int +358 400 126597
remember add your return address with short description of fault and put the charged in the parcel

Dec 14, 2008 | Electrolux Trilobite Vacuum

Not finding what you are looking for?
Electrolux Trilobite Vacuum Logo

Related Topics:

617 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Vacuums Experts

Roger Potts

Level 3 Expert

694 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you an Electrolux Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...