Question about Gigabyte 440LX (GA-686LX3) Motherboard

1 Answer

I have teouble to start my comp i got one long tone and followed by three short tones , can you help me whats wrong to my comp. Mod : GA-686LX3

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 44 Answers

Remove RAM, clean slots by blowing air, fix RAM back and check whether it is properly seated.Check whether all the wires connected to the motherboard are fixed properly.

Posted on Sep 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a KX-T7130 phone system with intercom. for the last 4 weeks, every phone will ring once and then the call gets hung up before I can answer it. I can use every phone to call out, but just can't...


Most likely NOT your phone system (anonymous)

Neither is it likely accidental...

What it sounds like you are getting is a "ring splash"

It is a token ring to let you know a call was forwarded...

My best suggestion would be to call YOUR OWN
number and find out who has been getting your call...

Or at least what kind of TREATMENT your callers have been getting...

Since this is a GLOBAL SITE... I would suggest you consult
your service PROVIDER.. for the appropriate enable & cancel CALL FORWARDING.

BELL-SYSTEM Codes to invoke and cancel

Codes: *72 and *73: respectively

Forward... *72 = ("star, seven, two")

*72 (wait a second dial tone) dial tone + (forward number)...
If the call is answered the FORWARD is complete...
(confirmation)

Else
Repeat the SAME dialing PROCESS
(OK: indicated by two stutter dial tones followed by dial tone).
((confirmation)).

Cancel FORWARD...
*73: To CANCEL forwarding... *73 = ("star, seven, three")

(again OK... Success is indicated by two stutter dial tones followed by dial tone (yet another confirmation))...

Hope this helps...

https://en.wikipedia.org/wiki/Carnac_the_Magnificent Carnac the Magnificent

May 24, 2017 | Panasonic KX-T7130 Corded Phone

1 Answer

Driverts calls


Hi, You can use this instruction to activate and de-activate Call divert .Works on all phone


Turning Call Divert On

*
by Touch Tone phone

Step 1 Lift the receiver and listen for the dial tone.
Step 2 Press the Divert On button if using an Optus OneTouch phone, or dial *78 from any other touch tone phone.
Step 3 Listen for three beeps followed by a continuous tone.
Step 4 Dial the telephone number to which the calls are to be diverted.
Step 5 Listen for two short beeps, confirming the diversion.
Step 6 Replace the receiver


Turning Call Divert Off

*
By Touch Tone phone

Step1 Lift the receiver and listen for the dial tone
Step2 Press the Divert Off button if using an Optus OneTouch phone, or dial #78 from any other touch tone phone
Step3 Listen for two short beeps to confirm removal of the diversion
Step4 Replace the receiver.



Other Call Divert Options - Selective Calls
With selective call options, you can choose which numbers you wish to divert, accept or reject by adding these numbers to a list. You can list up to 30 numbers for each call option.

*
Turning On or Off Selective Call Options

Step1 Lift the receiver and listen for the dial tone
Step2 Press the access code for the service you require. You will hear a prompt telling you the status of the service and how many telephone numbers you have on your list. To turn the service on/off press 3.

Access codes Dial
*63 for Selective Call Divert Dial
*68 for Selective Call Accept Dial
*60 for Selective Call Reject
Step3 For Selective Call Divert you will then hear the 'divert to' number that is currently entered. If this number is correct press 1. If it is incorrect, press 0, then re-enter the phone number you wish to have your calls diverted to. When turning this feature off dial 3 again.
Step 4 The feature is now on/off.
Step 5 Replace the receiver.


Note: You can divert calls to a local, national or mobile. However, you cannot divert calls to emergency, 0055, 1900, 008, 1800, 0050, 13, 1300 or international numbers.

Hope it helped.

Thanks for using fixya...

Jan 11, 2011 | Cell Phones

1 Answer

Have Seth Thomas Regulator clock...three years old hourly ring tones are out of sequence and time of day: i.e. 7:00PM migh dong five times; 9:00AM migh dong three times etc. Directions for setting time...


Sounds like a strike cam and rack alignment or hang up / sticking issue.

If you have already attempted to follow directions "Many Times" Recommend contacting help in your area.

GOTO
http://www.watch-clock-makers.org/
Hope this tip helps.
r/ David
http://antiqueclock.clockstop.com/

Mar 04, 2010 | Watches

1 Answer

My pc is making a alarm tone sporadiclly and will sometimes shutdown and reboot.I found that by wiggling the harness of wires inside ,the tone alarm will stop..but will start again . Any idea? MB ...


That tone is a warning code.Go to the manufacture websight and look for error tones or codes.

take side cover off and secure all wires and make sure everything is plugged in correctly.

Jan 06, 2010 | R.A.M. Computers Gigabyte GA-K8NS...

1 Answer

Hi,i have a compaq presario & the keyboard has started with the following problem, when you press any key there is a tone but nothing happens, you have to keep the key pressed until a 2nd tone sounds...


Hello,

Please go to control pannel>accessebilty options.There will be three options under keyboard tab.Uncheck all (or anyone which is checked).

Thanks.

Dec 30, 2009 | Office Equipment & Supplies

1 Answer

I hear beeping tone in my cpu when i plug it


When the computer makes those funny sound via the system speaker, it's not doing it because it wants to be heard. The computer is trying to talk to the operator/technician and tell them what's wrong.


So here are some codes to give you an idea of what might be wrong with your PC.



Beep Code: Description of Problem: No Beeps Short, No power, Bad CPU/MB, Loose Peripherals One Beep Everything is normal and Computer POSTed fine Two Beeps POST/CMOS Error One Long Beep, One Short Beep Motherboard Problem One Long Beep, Two Short Beeps Video Problem One Long Beep, Three Short Beeps Video Problem Three Long Beeps Keyboard Error Repeated Long Beeps Memory Error Continuous Hi-Lo Beeps CPU Overheating

Nov 30, 2009 | Computers & Internet

1 Answer

Mother board make a siren like high low tone when powering up


possibly wrong ram or ram may need to be reinserted, ram could also be faulty

Oct 30, 2009 | Gigabyte GA-8EGXDR-E Motherboard

1 Answer

Setting up gigabyte ga-686lx3 verion motherboard


Here's a link to where you can get the manual free and it will show you the jumper options and all. Hope this helps.

http://www.motherboards.org/mobot/manuals/Gigabyte/GA-686LX3/

Mar 29, 2009 | Gigabyte 440LX (GA-686LX3) Motherboard

1 Answer

My Black Jack II ring tone files are corrupted and will not play


check out this thread. near the bottom is an explanation to reset your phone back to default settings. you will lose all programs d/l so I suggest you sync your phone with your comp to save all your contacts first.

http://forums.wireless.att.com/cng/board/message?board.id=samsung&thread.id=68502

Mar 07, 2009 | Samsung Blackjack SGH-I607 Smartphone

Not finding what you are looking for?
Gigabyte 440LX (GA-686LX3) Motherboard Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gigabyte Computers & Internet Experts

David
David

Level 3 Expert

778 Answers

Tony

Level 3 Expert

2600 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gigabyte Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...