Question about Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Start light just blinks when you press it - Whirlpool GU2400XTP Built-in Dishwasher

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 2,605 Answers

Whirlpool built ( Kenmore, Kitchen-Aid, Jenn-Air, etc. ) dishwasher electronic control “blinking start light”

Hello, Welcome to FixYa.


The most common reason to experience the symptom described here is a often overlooked yet simply a faulty door switch.

The part to repair is typically only $10 -$15 at most appliance part retailers. The factory authorized part number is # 8269209.

What happens is the switch is not indicating to the control that the door is closed, hence not allowing the unit to start...exactly what it is designed to do.

You will need to remove all the #20 torx head screws around the inner door panel to separate the panels.

Once done, remove the rectangular plastic protective cover over the control and switch assembly, and there lye's the micro switch.

If you check local brick & mortar retailers or on-line depots such as “searspartsdirect.com” “repairclinic.com” or “appliancepartspros.com” to name a few you will find the micro switch I am referring to here.

start light just blinks when you press it - f3b5d61.jpg

**Please turn off the breaker panel before service is done to the unit...safety first**

Of course I should add one could experience these same symptoms if the door where in fact not closing or the latch itself is not contacting the switch inside the door.


Let me know how you make out and what you find.

Thank you for choosing FixYa for your repair needs and good luck going forward.


Macmarkus :)

Posted on Sep 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In tvs speed 40 printer all led light are blinking


follow these steps
1) Press ST1+READY button together
2)Turn on the tvs speed 40plus passbook printer
3) The 4 LED will blink 4 times. Release the button ST1+READY immediately after 4 blinks
4)PRESS ST1 - ST1+READY+EJECT starts blinking
5)again PRESS ST1 - ST1+EJECT+ST2 starts blinking
6)again PRESS ST1 - ST1+EJECT starts blinking
7)again PRESS ST1 - ST1+EJECT starts blinking
8)again PRESS ST1 - READY+EJECT starts blinking
9) printer is READY wait and PUT PAPER.
10) The paper goes in and comes out 3 times. will take about 2 minutes.
11) Paper ejects automatically after printing.
12) turn off the printer and turn it on.

Jan 24, 2014 | Office Equipment & Supplies

1 Answer

I have a Frigidaire front loading washer LTF 2140FS2 that will not start. I press the Start button door locks, press again the Wash Cycle light comes on. Then after a few seconds all the cycle lights...


Hi
Press and HOLD the Start/Pause and Cancel buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an E followed by two numbers, a number and a letter or two letters, please post back with the error code for further assistance.
Daniel

Sep 25, 2011 | Frigidaire Washing Machines

1 Answer

Green light is blinking --says clean when you push


Hello & Welcome to FixYa

Flashing green light is reset by pressing two buttons in sequence 3-4 times, to reset your dishwasher press these buttons in sequence:

High temp wash-heated dry-high temp wash-heated dry

Please get back to me if you have any other questions.

Kevin

Jun 10, 2011 | Kenmore 16764 Dishwasher

2 Answers

When I turn the printer power on, The lights are blinking.


  • Unplug Power Cord

  • Hold POWER and RESUME buttons

  • Plug in Power Cord

  • Release buttons after the printers starts up

  • Hold CARTRIDGE and RESUME

  • Press POWER

  • Release all buttons after the beeps

  • Press CARTRIDGE 16 times

  • Press RESUME

  • Unplug the Power cord

  • FINISH
  • Nov 12, 2009 | Canon BJC 55 InkJet Printer

    1 Answer

    Clean light blinks constantly



    press heated dry
    press normal wash
    press heated dry again
    press normal wash again..........
    .....wait a few seconds
    all the lights should come on
    press cancel (should hear pump)
    hit cancel again

    Hope this helps, it worked for me, but it may depend on your model.

    Feb 05, 2009 | Kenmore Dishwashers

    3 Answers

    Password to avoid the unauthorized Use


    press the exposure light button for 5 sec n after that the indications wiil apear n on the display there will b 2 dashes blinking so u input 10 n press stars after that the no wiil blink 100 so u have to make 101 by pressing start then press c n then input 11 start n when 3 dashes blink input ur code only 3 digit n press start n press the expossure botton n cm out if there is any prblm call me on 9923483607

    Jan 31, 2009 | Sharp AR-5320 Black and White Copier

    1 Answer

    Dish washer 665.13824k601


    LOCK LIGHT STAYS ON AND WILL NOT START. I HAVE TURNED THE POWER OF AT ELECTRICK PANEL AND IT STARTED ONE TIME. BUT DID NOT START ANYMORE.

    HELP

    Nov 27, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

    1 Answer

    Sky code for remote


    The code for you sky remote is 0125.

    4 digit' method

    1. Turn on your TV.

    2. Press tv on your Sky remote control.

    3. Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice.

    4. Press tv on your Sky remote control again.

    5. Key in the Brand Set code for your brand of TV then press select. The light on the Sky remote control blinks twice.
    If the light blinks once only, re check the code for your TV and start again at step 1.

    6. Press the on/off button (power-top right button on your Sky remote control).

    If your TV switched off, press select . The light on the Sky remote control blinks twice.

    If your TV did not switch off, press tv , then press the on/off button. Repeat this (press tv , then on/off) until your TV turns off, then press select.

    If the light on your Sky remote control blinks three times, your Sky digibox has checked all the possible settings for the code you used. Check that you have the right 4 digit code and start again at step 1.

    7. Press tv guide .
    If you see the TV Guide screen, the remote control setup process is complete.

    If you did not see the TV Guide,you must now set the TV Guide function as follows:

    8. Press tv on your Sky remote control.

    9. Hold down select and the green button together for about two seconds, until the red light on the Sky remote control blinks twice.

    10. Key in the number of the channel on your TV that you use for watching satellite TV (For scart switching, this may be one of the other buttons on your remote e.g. help, i or a colour button).

    11. Press select on your Sky remote control. The red light blinks twice. The remote control setup process is complete.

    Feb 13, 2008 | Televison & Video

    3 Answers

    Dishwasher lights blinking


    QuietGuard3: Clean light flashing 7 times? Press Heated Dry, press Normal Wash, then press Heated Dry again and press Normal Wash again (that's 4 button-presses) and that should fix it.

    May 11, 2007 | Whirlpool GU2400XTP Built-in Dishwasher

    Not finding what you are looking for?
    Whirlpool GU2400XTP Built-in Dishwasher Logo

    599 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Whirlpool Dishwashers Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Mike

    Level 3 Expert

    4340 Answers

    Owen Barnes

    Level 3 Expert

    867 Answers

    Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...