Question about Indesit 18 in. D41 Slim-Line Free-standing Dishwasher

1 Answer

Door won't shut

Don't know why but my indesit slimline dishwasher door won't shut , fills like it isn't catching onto the latch even though the latch looks ok. There are defiantly not any obstructions had a good clean around seal .......
Help really annoying !!!!!

Posted by on

  • vikki007 May 11, 2008

    The latch when removed from door and tried works ok, when reattached to door the problem is still there. there is no movement made it is very firmly in place with no debris and door doesn't appear to have dropped any other suggestions would be gratefully received..... is this a common problem?

  • Anonymous Nov 28, 2008

    Same problem.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Is there sufficient spring reaction? Spring weak or broken? Has latch or catch moved? Is there adjustment on either? Is there debris stopping mechanism from working? Has door dropped?

Posted on May 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi ive an indesit ids105s uk dishwasher thats over filling with water and then the dry and end light flash continuosly while the machine drains the water . is this a faulty pressure or flow meter?


Hi
Ok lights 2 and 3 flashing is a time out filling.
Its not filling up in time so the machine error codes out and you will then get the flashing lights.
First off make sure the water tap is fully turned on.
If thast fine then pull machine out and make sure the fill hose isnt kinked up at the back.
If it looks fine then take off the fill hose and aim it into a bucket and turn the water tap on.
Make sure theres a good water presure there.
If there is refit the hose and retry the machine again and see what happens.

from: http://www.justanswer.com/uk-appliance/4uxau-indesit-ids-105-slimline-dishwasher-when-try.html

May 08, 2014 | Indesit IDS105 45 cm White Freestanding...

1 Answer

My Prima LPR660 will not start even though all the lights are on


It is likely the door latch microswitch is faulty and preventing the controller from confirming if the door is shut or not. Or it is possible the door latch mechanism is preventing door from shutting. It looks like this.
Prima Door Interlock

Jan 08, 2014 | Dishwashers

1 Answer

Indesit d63 dishwasher, door locked shut. took top off+got to latch, the plastic catch wouldn`t pull out of the latch. undid it all, all seems unbroken but cannot seem to arrange the latch so that it will...


check with whoever you order the latch from, usually parts are individual for electrical parts and never assume that the screw or washer will come with new one, save every piece.

Mar 09, 2010 | Indesit 24 in. D63 Free-standing...

2 Answers

Rinse cycle continues after the door is open


There is a door interlock within the door assembly. I believe it's mechanically stuck rather than needing replacing.

Turn off & unplug. You should be able to get to the internals of the door via screws around the edge. The interlock will be very close to the handle catch. Check operation by inserting a dummy catch to lock onto it.

If it is stuck solid - order a replacement.

Aug 04, 2009 | GE 24 in. GSD6660GSS Built-in Dishwasher

1 Answer

Soap dispenser door not catching properly


THE INNER DOOR PANEL HAS TO BE DISASSEMBLED TO ACESS THE SOAP MECHANISM NO IT DOESNT JUST PULL OUT

Jan 16, 2008 | Hotpoint 24 in. DWF61 Built-in Dishwasher

4 Answers

Indesit dishwasher


I had the same problem, so I took the door apart as explaned above, found it was gunged up with residue from the washihg cycles. Gave it a good clean, while the part was disconected of course, and hay presto! the door works like new again.

Jan 06, 2008 | Indesit 24 in. D63 Free-standing...

2 Answers

Indesit di260


if its the latch tongue remove the top panel...if its the door remove the console

Aug 17, 2007 | Indesit 23 in. DV62 IX Built-in Dishwasher

2 Answers

Door not opening


there is no release catch. you will just have to pull hard!

Feb 14, 2007 | Indesit 23 in. DV62 IX Built-in Dishwasher

4 Answers

Broken door handle Indesit dishwasher DG 6100


I agree read "broken door catch" solution and be particularly careful in respect of the edges of the stailess steel panels - some of the edges are hidden and they are very sharp.

Jan 29, 2007 | Indesit 24 in. D61 Free-standing...

Not finding what you are looking for?
Indesit 18 in. D41 Slim-Line Free-standing Dishwasher Logo

643 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Dishwashers Experts

noel
noel

Level 3 Expert

2922 Answers

Ted Maxwell

Level 3 Expert

3515 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

10589 Answers

Are you an Indesit Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...