I have a fujitsu monitor which was used to promote games on PS2 console in a shop, It now hangs on the wall at home. Two weeks ago it just went from working to standby. If i leave it turned off for a couple of days it comes back on fine for about 20 minutes then goes to standby. Any suggestions?
Thanks
Harvey
It sound likes electrolytic caps in the power supply have started to dry out keeping the proper voltage maintained to the sustain board then to the z sustain board. It is advisable to have this taken care of "pronto".
It is the soft wear protection system error. You should asked for service.
564 views
Usually answered in minutes!
harvey, you're screwed. it is going to cost me 1800 to get the boards replaced, so i'm looking at buying a new set. they say it's just age. mine is four years old, and may not live another day.
I have a Fujitsu 42 inch and it's 3 years old. For the past 6 months I have had a **** screen and no one can tell me what's wrong or even come and have a look. Fujitsu in Australia have been no help whatsoever. The screen has a fence like effect with the picture behind the lines of what appears to be like a paling fence. Has anyone else had this problem and if so what can be done to fix it. I have to turn it on and off several to lessen the effect but you cannot get rid of it completely. Help!!!
×