Question about Panasonic KX-T7730 Corded Phone

1 Answer

Direct line ring on my extention

How do disable direcet ring to my extention numbre? when some one call to our landline numbre my extention aslo rings which is really disturbing a lot.

Posted by on

1 Answer

CALL A QUALIFIED TECH TO COME OUT AND PROGRAM IT FOR YOU AS TURNING OFF DIRECT DIAL IS A SYSTEM PROGRAM NOT USER

Posted on May 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phone rings once then cuts off. Can ring out OK.


Something has a shorted the line, unplug all phones, then call your line with a cell phone and see if it is still happening. If so, you will need to call repair. If not, plug 1 phone in at a time and call your number again, and repeat until you find the phone causing it to trip ring.. also if you do not have a inside wire maintenance agreement with you local phone company, start the test at the network interface device..

Aug 11, 2015 | Phones

1 Answer

NorStar M7208 - How to remove global ringing?


This is tech side of programming and not Admin, if you don't know config password or how to program then call a tech.
If you do know then:
First find out what line #, do F*0 then press the button and note the full number on the display.
i.e. Line 5 in programming is Line 005, 025 or 031 depending on software version.

Sets/LineAccess/LineAssignment/Show line ***/Change to Appear Only or Not Assigned.

Jul 25, 2012 | NorStar M7208 Corded Phone

2 Answers

How do I set phone to ring at my extention?


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist’s extension to Immediate Ring and the lines at the users’ extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users’ extensions -with the receptionist providing backup -set the line at the users’ extensions to Immediate Ring. Then set the line (or lines) at the receptionist’s extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist’s extension.
Programming
To change the way outside lines or pools ring at an extension:
  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Dec 01, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

Landline phone does not ring out when there is an incoming call


incoming calls ringer on corded land line phone no longer works

Nov 02, 2009 | Phones

1 Answer

M7310 rings on 2 extentions


Sounds like the main phone(221?) has an answer dn key on it.
To delete the answer dn key you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wantdelete the answer dn key from.i.e. if entension 223 is also ringing on 221 enter 221.
Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the next key (bottom right arrow) 4 times .
The display say ANSWER DNs.
press the show key (top right arrow)..
The display should ask for an answer dn number.
Press the SCAN key (one of the three soft keys near the display)
The extension that was ringing on this set should be listed here.
Press CHANGE til it says UNASSIGNED.
Press the release key when finished

Mar 26, 2009 | NorStar Meridian M7310 Phone

1 Answer

Ring count between automated attendant and default extention


On extension 10 or 11, press Feature 00, left intercom twice, #506, mode 1, line 01, number of rings 0, do the same for all lines.


#321 to change a number of rings before individual VM picks up

Feb 16, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

Stop ringing at certian phones when outside calls come in.


http://dstech1.com/programming-line-ringing/


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist's extension to Immediate Ring and the lines at the users' extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users' extensions -with the receptionist providing backup -set the line at the users' extensions to Immediate Ring. Then set the line (or lines) at the receptionist's extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist's extension.
Programming
To change the way outside lines or pools ring at an extension:
  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Jan 09, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

Pick up handset to answer a call and NOT have to press a line


if your phone had set for ringging assignment, u no need to press any key to answer the call.
check the indicator light,
if green light turn on, u can direct answer the call
if red light turn on, u ned to press the line to answer the call
kindly ask the phone provider the set yr extention for incoming ring assignment

Nov 12, 2008 | Toshiba DKT-2020 Corded Phone

1 Answer

No ring on phone


check that you have master type socket

Jun 02, 2008 | Phones

1 Answer

Norstar Phones - Turn off ringer on phones


You have to go in to programming and set the phone in the shop to ring on line 3 only and the phones in the office to not ring on line 3.If you don't know how to go in to programming please inform me.

May 14, 2008 | NorStar M7310 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7730 Corded Phone Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts

kakima

Level 3 Expert

96467 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...