Question about Apple Aperture 2 for Mac

2 Answers

I have Aperture 3. Turned on Aperture this AM and for the first time the projects show but no pictures. The number of pictures in each project or folder shows, but no pics. Pictures show up in faces, but can not open the pics. Browser shows no pics in project or folder mode. What have I done wrong here?

Posted by on

  • allencollins Sep 03, 2010

    Thanks for input. I have not done the things you refer to. The projects and folders represent
    pictures from the past several years input and have been easily accessible until now.
    As I mentioned, when I go to faces and search for photos with a particular face they all are shown
    as in browser, but am unable to open or access them. When I open a project or folder the screen is blank.



  • allencollins Sep 04, 2010

    Projects and albums have been added to Aperture over four years. Have 17 Projects and over 1000 pictures but am unable to access them. The projects are shown with the number of pics shown, but no pics. All of the projects show when project is selected. A blank screen when albums are selected.
    Picture icons show up when faces is selected but am not able to select the pictures shown

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,675 Answers

Hi this could be that the projector is not recognising the picture format, try changing the picture format and try to see if you can view, then if not associate it with another type of picture file, keep doing this until it shows, also make sure the pictures you are trying to look at are actually assigned a type format....hope this helps

Posted on Sep 04, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Apple Master
  • 4,924 Answers

This is happening if you move the physical location of the pics...or if they were used (imported )but the were actually stored on a removable card or something like that ...and now that device is not connected anymore..or ..u used them without actually moving in the project ..and after that deleted them from the original location ..and now it has no physical files..in that location ..

Posted on Sep 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture cloudy hazy


based on model number it could be cleaning or another issue--with color turned off what color is the screen? On this set with back removed also clean the 3 large lens as if dusty picture will be dull and somewhat dark.

May 03, 2012 | Philips 60PP9202 60" Rear Projection...

1 Answer

Hey I was watching my tv model number ws-55857 and my screen turned an odd blue color yet I would still be able to hear, I turned the unit off and back on and had the same issue after a few more tries it...


Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.
This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.
You can get a repair kit with parts and instructions from www.TvRepairKits.com

Sep 24, 2010 | Mitsubishi WS-55857 55" Rear Projection...

1 Answer

Sony kp-51ws520 when turned on just has standby light flashing . the rest is all dead, no picture or voice.


Standby flashing light shows that tv got some internal problem. How many times standby light is flashing is info that provide info about what section of tv got problem.
Count standby light blinks and let me know, there would be 3 seconds long pause in blinks so count pause to pause.

Jul 21, 2010 | Sony KP-51WS520 51" Rear Projection...

3 Answers

I believe the blue lamp in my 57H81 is going bad.


You need to replace convergence out chips in your Toshiba 57H81 tv by qualified tech because 3-D look picture in rear projection tv shows some thing wrong with convergence output chips.
Your tv model number shows it is rear projection tv that use 3 tubes to make color picture on front screen where as dlp tv use one lamp as back light source to present picture at front screen that is generated in light engine.

Mar 25, 2010 | Toshiba 57H81 57" Rear Projection...

1 Answer

I have a big screen samsung it plays red and green and the imaged are doubled looks like 3d any ideas


Hi,
Your question shows its Samsung rear projection TV that has 3 tubes to project picture.
Symptom shows TV got problem in convergence board that will be replaced.
Model number or TV would help me to provide you more info.
Thanks.

Jan 15, 2010 | Sony KP-57WV700 57" Rear Projection HDTV

1 Answer

My rca toshiba 50 inch projection tv is showing a 3d color curve


Need the model number to help as I am not sure of you have a RCA or a Toshiba

Dec 19, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Sony wega 50 inch clicks and flashes 3 times and goes back onto s


If its model number is KF-50WE610, had you replaced its Lamp recently?
If Lamp is replaced, please check Lamp cover/ door that is not seated properly, make sure its fixed securely.
3 times light flashing shows Lamp cover error.

Jun 27, 2009 | Sony Grand WEGA KF50WE610 50" Rear...

Not finding what you are looking for?
Apple Aperture 2 for Mac Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Computers & Internet Experts

paulcarew

Level 3 Expert

2454 Answers

Martin Buck
Martin Buck

Level 2 Expert

82 Answers

Paul Bade

Level 3 Expert

1516 Answers

Are you an Apple Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...