Question about Cameras

1 Answer

Cannon \powershot D10 restart camera - Cameras

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Sep 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen not working on Canon powershot D10...takes pics but screen is black.


This is obviously a lack of power flow into the LCD. It could mean many things. All you need to do is; take it into a service centre for a check up and repair.
Don't attempt to fix it yourself.... if you value your camera, you need to accord it proper service ... and care.

Sep 02, 2014 | Canon PowerShot D10 Digital Camera

Tip

Canon PowerShot D10


Good day,<br /><br />It sometimes happen that you lose your cameras user manual.<br />This can be very frustrating as you need to look up something, but you can't seem to find a manual anywhere!<br /><br />Well if you follow <a href="http://www.usa.canon.com/cusa/consumer/products/cameras/digital_cameras/powershot_d10#BrochuresAndManuals">THIS </a>link you can download your cameras user manual on your computer and thus keep a digital copy handy for all the times you need it.<br /><br />Please let me know if this information was helpful!<br /><br />Kind Regards

on Dec 07, 2010 | Canon PowerShot D10 Digital Camera

1 Answer

Canon d10 water damaged


Buy another camera. Cameras as opposed to cell phone cameras have a flash circuit and water is conductive, so you have 300 plus volts going into a 6 volt circuit. You can use the camera as a paperweight

Apr 09, 2013 | Canon PowerShot D10 Digital Camera

2 Answers

My canon powershot d10 underwater still takes photod but the screen in blank.. Help can I fix this?


dear user,

its screen is faulty because of water dip.is only can replace the lcd of your camera

Regards
Salman

Pakistan

Feb 08, 2011 | Canon PowerShot D10 Digital Camera

1 Answer

My cannon powershot D10 wont take clear pictures. Its just a fuzzy screen when I turn it on. I just used it an hour ago and it was fine. It is ruined or can I get it fixed?


These cameras use a focusing ring, that is controlled by electro-magnets and signals from the onboard processor. If any dust, sand, lint, etc., gets inside the lens assembly, it can jam the ring, not allowing it to focus. Your best shot to remedy this (short of repair) is to get a can of compressed air and spray it into the front of the lens assembly, trying to loosen the ring and allow it to work. You can buy the compressed air at Walmart for around $4, and it's also handy for cleaning out computer keyboards and the vents on laptops. If you don't have any success with this, repair will be necessary. Make sure you get an estimate first, since the whole camera will have to be disassembled to solicit the repair. Often, the cost of repair is more than that of a new camera. Here's a web blog about the problem of stuck lens, and you can also try their other hints, in the hope of freeing the focus ring up.
http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html
The blog is about lens errors and problems with the lens assembly, so it also applies to the problem you're having. Good luck, and hope this helps!

Jun 20, 2010 | Canon PowerShot D10 Digital Camera

1 Answer

When i try to turn my Canon d10 on, i see a timer counting up instead of the image... it's a blue screen with white numbers


that's the clock feature, you must be holding down the "func set" button as you're turning on the camera.

Apr 18, 2010 | Canon PowerShot D10 Digital Camera

3 Answers

First inmersion with Canon D10.Display went off, never recover. But it seems the camera functions, as it takes pictures. I d br grateful is someone helps me, its my second day of holidays, it is not fair!...


Apparently, you got a camera with an lcd screen that leaks. If it's still under warranty, get Canon to fix or replace it. I know that doesn't help you on your vacation.

Jan 26, 2010 | Canon PowerShot D10 Digital Camera

2 Answers

Canon PowerShot SX100 IS


My Canon Power Shot SX100 IS says lens error. restart camera. Help

Aug 24, 2009 | Canon PowerShot SX100 IS Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...