Question about Bosch Axxis WFL 2060 Front Load Washer

1 Answer

Lock Symbol staying on - Bosch Axxis WFL 2060 Front Load Washer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Bosch Master
  • 2,605 Answers

Hello, welcome to FixYa.

The Key symbol means the lock has been activated some how.

On most bosch of your class this is how you work it on & off.

Here`s how to deactivate it...

1) Press the "menu" button until you see "CHILD LOCK :ON" appear in the display. ( if nothing is pressed within 10 sec.following this the menu will close and it will default to program in the display )

2) Once you see what I just mentioned in the display press the "select" button until "CHILD LOCK :OFF" appears in the display.

3) Finally by pressing the "start/pause" button the key symbol should disappear confirming you have successfully exited the child lock program.

Let me know if this was helpful to you or not, if so please take a second and rate it accordingly.

Thank you for visiting "fixya" for your washer solution inquiry.

good luck going forward.

macmarkus :)

Posted on Sep 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Pontiac g6 is tweaking put bad. Gauges drop and stay down. Engine acts like it has no power. Can't accelerate. Sometimes the power steering stops workings and sometimes the car won't start. Won't...


Replace the ECU computer, or better yet take to a garage to put a diagnostics unit on it,it will tell you what's wrong straight away so you don't waste money replacing the wrong thing.

Jan 20, 2018 | Pontiac Cars & Trucks

1 Answer

Lock on light stays on ...


There should be a key located near (above or below) the lighted lock symbol. Usually, it's the Heated Dry button. Whatever it is, press and hold that key for 5 seconds. That should unlock your dishwasher and you can now use it normally.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Aug 31, 2014 | Kenmore Dishwashers

1 Answer

Lock displaying symbol


Haven't done this exact model but usually it means keypad locked (child lock) should be in the manual how to unlock. Usually hold down a couple of buttons for 5sec.( most of the time a faint lock symbol will be written between the buttons on the button panel.)

Sep 23, 2013 | General Electric WCVH6800J Front Load...

2 Answers

Door light symbol stays on dash panel what is problem


door is partially open or switch on a door is out of position.
takes 2 people but goes fast. open each door and manually
push the switch open to break contact and stop the circuit from
working.

Feb 12, 2013 | Chevrolet Cars & Trucks

2 Answers

Security unlock?


try pressing the buttons:

There are 3 lock symbols on the keyboard:
- the NUM LOCK that has the number 9 in it
- the CAPS LOCK that has the letter A in it
- the SCROLL LOCK that has the arrow down in it

- NUM LOCK is always turned on by default

Dec 18, 2009 | Dell Inspiron 1525 Notebook

1 Answer

Blinking blue box with lock symbol on screen


hold down the menu button for 20 seconds until the lock symbol turns into an unlock symbol.

Oct 03, 2009 | Dell E172FP 17" LCD Flat Panel Monitor

1 Answer

Dead T4220 - 4 beeps @ POST & blinking lock symbol, screen blank


this beeps are signal of a dead cpu or memory. Check with manufacturer to confirm diagnostics.

Jul 08, 2009 | Fujitsu LifeBook T4220 (A1A5J1A414B30000)...

1 Answer

Shift lock light stays on in drive


sounds like something might have gotten into the shifter mechanism. several things could get in there like the accordian strip around the shift handle, coffee or soda could be spilled in there,....ext. another possibilty is the shifter cable going bad . I'd disconnect the shifter cable from the tranny and see if it all moves free then, if not any better take apart the shifter itself and see whats making it hang-up.

Apr 01, 2009 | 2000 Audi A6

Not finding what you are looking for?
Bosch Axxis WFL 2060 Front Load Washer Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

80531 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...