Question about HP LaserJet 4250n Printer

1 Answer

Hp leserjet 4250n network ip change solushion

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Print out the current configuration of the printer, Press the Tick button, navigate to Information, press the tick button, navigate to Print Configuration, press tick button.

On the printout find the current IP address. Open a web browser and type the IP address into the address bar, press enter.

The printer setup will be loaded into the web brower. Navigate to the network configuration so you can see the IP, gateway and subnet IP addresses.

You can now change these but once you have your browser dispay of the printer will disappear.

Type the new IP address into the web browsers address bar and you should get the new configuration displayed.

Posted on Dec 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why Does my Printer not save IP Address


if no network cable is connected then it will always show as 0.0.0.0 this is because the network connection is not activated without a network cable

Mar 31, 2014 | HP LaserJet 4250n Printer

1 Answer

Error timeout


download the user manual and look under 'setting timeout'
a function that can adjust the cutoff point - having said that I have never had to adjust the factory setting - I've allways found the error to be with the customer nertwork usually a conflicting ip address or poorly setup network
if you want to be sure that its nmot your network try pinging the printer via a dos window and have a look at the response time anything less than 100ms is good enough( usually 0.1ms) and if that is what you get when pinging then look at the network and not the printer

Jan 20, 2014 | HP LaserJet 4250n Printer

1 Answer

Not able to change the default gateway. It just takes what ever the IP address is


Are you using DHCP to obtain the IP address? If so, typically the gateway will be automatically assigned, and if the DHCP server does not have a gateway programmed in the printer will default to it's own address. Change the IP setup to manual and you will be able to put in any address you want for the gateway.

Jul 12, 2011 | HP LaserJet 4250n Printer

1 Answer

Who can configure IP in 4250 Printer


To configure the Jetdirect printer server on your printer as a network printer, please click on this link and follow my instructions.
http://www.fixya.com/support/r3559242-setting_up_hp_jetdirect_print_server_p

Jun 28, 2011 | HP LaserJet 4250n Printer

1 Answer

What is the default ip address of the printer hp laserjet 4250n?


There is no default IP address on HP printers with Jetdirect print server card.
You set the IP address in the printer's network settings. The IP address need to be set to match your network's address range.
To configure the HP network printer to work on your network, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559242-setting_up_hp_jetdirect_print_server_p

Dec 14, 2010 | HP LaserJet 4250n Printer

1 Answer

My network printer not taking ipadress as i have provided static ip through laptop.is there any settings in printer to add ip address . thanks , kalyan


First, make sure you have plugged in a network cable CAT5 or CAT6 into the printer's network card (if you don't have one, then you can't use it as a network printer). Also, the network cable should go to a switch, hub or router.
Second, the IP address needs to be set on the printer, not through laptop. You should browse to the menus of the printer, until you find a menu Network, under this menu you should have TCP/IP sub-menu where you need to set the IP address, also there must be a Subnet Mask sub-menu and a Gateway sub-menu. This two options should be set up as well.

Nov 23, 2010 | HP LaserJet 4250n Printer

2 Answers

What are the options on HP laserjet 4250 menu, i want the one to enter IP configuration


Follow these steps

Menu
Configure Device
I/O
Jet Direct Menu
TCPIP
Configuration Method

Oct 25, 2010 | HP LaserJet 4250n Printer

1 Answer

Need to move networked HP 4250 n from one IP scope to another


Yes. On the front panel menu, go to the I/O submenu and under that submenu you'll want the embedded jetdirect menu. This is where the network settings can be configured.

Feb 24, 2010 | HP LaserJet 4250n Printer

2 Answers

Does HP Laserjet Printer 4250n consists of Deuplexer Unit for two sided printouts? Vyankatesh


This is an optional accessory you can purchase. It's price varies considerably depending on where you purchase it from.
It's model number is: HP Q2439B
Thank you,
Lee

Dec 11, 2009 | HP Office Equipment & Supplies

Not finding what you are looking for?
HP LaserJet 4250n Printer Logo

1,613 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...