Question about Computers & Internet

1 Answer

Hi i my sound system driver is deactive how i get it back

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,291 Answers

First verify you see a small sound icon in the Systray . If this icon is missing follow the below section
1. Open the Control panel
2. Open the "Sounds and Audio Devices" icon.
3. Verify the "Place volume icon in the taskbar" checkbox is checked. If this option is not available or is grayed out, skip to the next section of this document.
4. If you were able to check this box, click ok and close out of this window and the Control Panel.
5. Double-click the sound icon in the Systray and verify that all the sound volumes are mid-way or higher.

Check Windows services. Right Click My Computer and Manage. Choose Services and Application

Posted on Sep 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to disable seatbelt alarm in an 08 dodge dakota?


The Enhanced Warning System (BeltAlert) can be enabled
or disabled by your authorized dealer or by
following these steps:
NOTE: The following steps must occur within the first
60 seconds of the ignition switch being turned to the ON
or START position. DaimlerChrysler does not recommend
deactivating the Enhanced Warning System
(BeltAlert).

1. Turn the ignition switch to the OFF position and
buckle the driver's seat belt.
2. Start the engine and wait for the Seat Belt Warning
Light to turn off.
3. Within 60 seconds of starting the vehicle, unbuckle
and then re-buckle the driver's seat belt at least three
times within 10 seconds, ending with the seat belt
buckled.

4. Turn off the engine. A single chime will sound to
signify that you have successfully completed the programming.

The Enhanced Warning System (BeltAlert) can be reactivated
by repeating this procedure.
NOTE: Although the Enhanced Warning System
(BeltAlert) has been deactivated, the Seat Belt Warning
Light will continue to illuminate while the driver's seat
belt remains unbuckled.

May 19, 2014 | QUEMEX Auto Islamic Azan Clock With Qibla...

1 Answer

I unknowingly deactivated my web cam... how to activate it............


Hi,
Go to MY Computer properties in that select your web cam and enable it.

OR
Uninstall it from system properties than refresh it the system will install the driver automatically

Jan 05, 2011 | ASUS Eee PC 900 PC Notebook

1 Answer

2001 toyota rav4. how do you deactivate the alarm system so i can start the car. dont have the keyless entry key (lost it) just have a regular key. but there is a red button on drivers side to deactivate....


Followed your recommendation of holding the valet (red) button for 6 seconds. It deactivated the alarm system and I was able to start the vehicle. This solution saved me from buying another key from the dealership (139$) and a programming charge of (100$). And not to mention the time saved from towing the vehicle to the dealership. I can't thank you enough for time and money saved with this valuable service. Will be signing up with your service when I get back from Orlando.

Aug 18, 2009 | 2001 Toyota RAV4

2 Answers

No Sound


hi! there,
check your sound device on control panel if there configure device,if no device check your sound device driver,you can see this on your device manager,also on control panel,go to system click it,on system properties click your harware,go to device maneger,on sound video click propeties,if no driver up date sound driver.or have installed on mother board cd installer,if there sound driver on your system,if you have the sound device check the volume, adjust volume and check if mute was activated,deactivate,on voice box check your test voice harware you can hear also,adjust the volume,if still no sound you may have an hardware problem if this a built in device,take this on service center hwere you buy this staff with warranty papers.they will arrange this for you.have a nice day,don't forget to rate me,thanks,

Apr 21, 2009 | Computers & Internet

1 Answer

I have windows xp professional system but my computer crash because I install a driver fro creative sound blaster, in the middle of my installation the computer stop and getting blue colour and lots of...


At the startup of the computer (before the "Windows XP is loading" picture) press F8 to get the choice to start in failsafe mode.

From here you can (if you haven't deactivate it) choose "Start from last working System restore point (or something like that, I have a swedish version so not 100% sure about the eng name for it).

If you have that choice, start with it, if not, go to failsafe mode and try reinstall the driver from there or to uninstall it. (or deactivate your soundcard when ur logged into fail safe mode)

Apr 19, 2009 | Microsoft Windows XP Professional for PC

1 Answer

No sound


Have you performed any windows updates right B4 you lost sound? if so try uninstalling them, or try Rolling back the driver to an older version if available, and test for sound through headphones as well as speakers if one plays and not the other its a different issue

Mar 29, 2009 | Toshiba Satellite P105-S6227 Notebook

1 Answer

1997 venture keyless remote programming


SYSTEM OPERATION

System warning lamp located on top of the instrument panel
Press UNLOCK button once , turns on interior lamps and deactivates alarm (if fitted)
Press UNLOCK button twice w/in 5 seconds unlocks all doors, turns on interior lamp and deactivates alarm (if fitted)
To activate alarm system (if fitted):
Switch ignition OFF
Open driver's door
Press Lock button on remote
Close Driver door
warning lamp will flash when system is activated
Press remote power sliding door button will open sliding door (if fitted) only if unlocked first
Pressing remote panic button:
*Sounds horn intermittently
*Flashes exterior lamps
*Turns on interior lamps
**Pressing panic for the second time OR switching ignition ON deactivates alarm.


PROGRAMMING
Remobe key from ignition switch
Remove the "BCM PRGRM" fuse, from the fuse box
Close all doors
Turn ignition switch to the ACC position
With in 1 SECOND , turn the ignition switch to OFF then back to 'ACC'
(really, with in one second)
Open and close the driver's door. A chime will sound, indicating programming mode activated
Press and HOLD LOCK and UNLOCK SIMULTANEOUSLY untill a chime sounds 2 times ( about 15 seconds)
Repeat this exact procedure for all remotes to be programmed
Remove key from ignition
Refit 'BCM PRGRM' fuse.

4 REMOTES MAXIMUM CAN BE PROGRAMMED

Aug 24, 2008 | 2000 Chevrolet Venture

1 Answer

Factory installed alarm won´t deactivate


Open the door insert key in ignition. turn to on

Now hold down the red button which should be flashing, untill silent

this will deactivate the alarm.


Jun 29, 2008 | 1999 Mitsubishi Montero Sport

1 Answer

Audigy SE 7.1


Hello from Canada !! Yes you certainly can. You have to go into Start---->Control Panel----->System----->Hardware---->Device Manager---->Sound And Game Controllers. From here you can disable the on board sound once before your new card is installed. Once you have the driver installed for the card, you may have to reboot the system. Any further questions, just ask. Good luck

Nov 20, 2007 | Creative Labs Sound Blaster Live! 5.1...

1 Answer

Speakers won't work


Hi, you may want to try plugging the input line of the Dell speaker to the other jacks. Normally green is for speaker, pink - microphone and blue is for line-in and all are normally at the back of the computer. Sometimes, the back are deactivated if there are jacks in the front., so you may to try plugging it in the front if they are present. Assuming the speakers light/power up, if you want to check if they are working is by touching with your finder the input plug which should produce a humming sound. Also worth to check the drivers of your sound card. Hope this works for you. Regards.

Apr 14, 2007 | Dell A525 Computer Speakers

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...