Question about Kenmore 40494 / 40495 / 40499 Electric Single Oven

1 Answer

Stove has no power ( kenmore )


After cooking a meal in the oven, I opened the open door and there was
a loud pop, now i have no power.

Posted by on

1 Answer

Cory
  • Level 2:

    An expert who has achieved level 2 by getting 100 points
    MVP:

    An expert that got 5 achievements.
    Governor:

    An expert whose answer got voted for 20 times.
    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 79 Answers

Sounds like it could be one of a few things:
The Fuse - Check this first. Have you a electrical safety cut-off switch box? Check if the kitchen appliances switch has tripped.

The heater element - you'll be able to tell if there are any bulges or blows on the element.

The transformer - most appliances have a built-in power transformer. Yours may have overloaded.

The PCB - This would be just plain bad. It's the clever chip that controls everything and it's expensive to replace.

If you have a phone number on the appliance for a 5-year free parts warranty; I would take it out. Then you only pay about £90 for the service.

Posted on Jun 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

6ya.com

Download 6ya

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My oven is flashing a F10 code and the door is locked. This happened while the oven was in self cleaning mode
more than likely the tco thermal cutout fuse has opened during cleaning and now the ovens latch motor cant get power to open,its under the top cover where the surface elements are located its a frequent thing with all ovens/stoves

Jan 12, 2013 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Kemore Mod# 911 4298814 Ser# 9762371 it is giving me a code F1 what is the proplem&
911= Roper stove made by whirlpool

F0 Defective ERC Replace ERC (ERC electronic range control; that expensive stove electronic control)
F1 Defective ERC Replace ERC
F2 Oven over heat Replace defective Sensor
F3 Oven Sensor Open Check/Replace Sensor
F4 Shorted wire or Sensor locate short and correct it or replace Sensor
F5 Defective ERC Replace ERC
F6 Problem with time keeping circuit Reset Time or cooking operation and check for proper ground
F7 Shorted or sticking button Clean button or replace ERC
F8 Defective ERC Replace ERC
F9 Door Latch Error Check latch and latch circuit

Jan 24, 2011 | Kenmore Ovens

2 Answers

Frigidaire gallery stove, oven not working,
Morison,
The same thing happened to me about a week ago. I was preheating our electric oven, heard a very loud bang/pop. Checked and the oven had PF (power failure) I went downstairs and the breaker was tripped. Came back upstairs and to look at stove, the burners are working fine so I continued to preheat oven after a half an hour the oven was only slightly warm. Did you ever find out what was wrong?

May 04, 2010 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

I own a Kenmore stove model #639539J2. The glass
yes. open the oven door to the first "click". it kind of stops about a quarter of the way open. most ovens you grab both sides of the oven door and pull up. some models have a couple of screws you have to take out before you can remove the oven door. then lay it down with the insie of the door facing up and take out all the screws holding the oven door together. some may be on the sides or the top and bottom of the door. when apart, clean first with easy off, then clean several times with windex till streaks are gone. assemble door in reverse and put back on stove.

Oct 10, 2009 | Kenmore Ovens

1 Answer

Same for us...
Hello. I'll try to get your Oven working right again for you. If your cook-top burners all work properly and your oven does not work at all, it's your control board. If you will call us with your brand and model number, we'll get the right part out to you asap so you can start cooking those delicious meals again soon. 972-859-0929. We look forward to heaing back from you soon. Hope this helps! :>)

Oct 03, 2009 | Ovens

1 Answer

Accidently started clean, food inside,hit cancel,can't open
you would have to disassemble the cook top in order to get the the locking mechanism to manualy unlockit

May 01, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Self cleanning oven - door is lock and I can not get it to open
if you open the lid on your stove,you will probably be able to reset the
switch manually (the latch).with the lid up its located toward the front
behind the safety latch.(by no means attempt to force,bypass,or disable this
switch)this is a safety feature designed to protect you from the high temps
generated by the cleaning cycle.hope this helps.thanx for using fix-ya
Try this, and let me know if it worked, I am trying to help someone else with the same problem, that stove is Model, 790

Mar 07, 2009 | Kenmore Ovens

1 Answer

Oven door locked will not open
try putting the stove in self clean when it goes in for about 1 minute cancel the self clean see if it opens.

Nov 30, 2008 | Tappan 30IN ELEC IGNa Oven

1 Answer

Oven stopped working while cooking a meal
it sounds like it burnt one of your main wires in the back of range. by turning a knob on you are getting a feed back. turn the power off remove back panel take a visual check of your wiring.

Nov 23, 2007 | GE Profile JKP18 Electric Single Oven

1 Answer

Oven
try stop/clear or cancel to clear the code also before you do tht look to see if any of the door latces are extended

Oct 22, 2007 | Kenmore 40494 / 40495 / 40499 Electric...

Not finding what you are looking for?

View Most Popular

40494 / 40495 / 40499 Electric Single Oven

  • Ovens

Related Question

My oven is flashing a F10 code and the door is locked. This happened while the oven was in self cleaning mode

  • Kenmore 40494 / 40495 / 40499 Electric Single Oven

Open Questions:

0 Answers

how do I turn oven back on after power outage all lights go on but the burners or oven wont eat up

Sep 29, 2014 | Kenmore 40494 / 40495 / 40499 Electric...

0 Answers

How to re-install oven door on Kenmore Classic

Jul 10, 2014 | Kenmore 40494 / 40495 / 40499 Electric...

0 Answers

f-3 fault control

Jul 07, 2014 | Kenmore 40494 / 40495 / 40499 Electric...

0 Answers

Kenmore 47485 showing F2 code. What's problem? Kenmore 47485 when setting temperature for bake, flashes F2

Jul 06, 2014 | Kenmore 40494 / 40495 / 40499 Electric...

See all Kenmore 40494 / 40495 / 40499 Electric Single Oven Questions

Related Topics

Kenmore 40494 / 40495 / 40499 Electric Single Oven Logo

395 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Kenmore 40494 / 40495 / 40499...

Kenmore 33169 Gas Single Oven

Kenmore 40494 / 40495 / 40499...

Kenmore 40494 / 40495 / 40499...

Kenmore 47783 Electric Single...

Top Kenmore Ovens Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Brad Brown

Level 3 Expert

15133 Answers

Are you a Kenmore Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...