Question about Printers & Copiers

1 Answer

Printer not printing from computer, print comes out small and illegible looks like some kind odf jabva scrkipt

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I've seen this once before. I corrected the problem by deleting all the installed printers and reinstalling the printer with the most recent drivers from the MFG's website.

Posted on May 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set it to draft


Go to the printer settings and have a look in there. The settings may be found on the printer itself if it has some kind of digital display, but more commonly it will be in your computer somewhere in Settings>Devices>Printer. Look for a setting like "print properties" and uncheck the "draft" setting to put it to normal printing. This may darken your printing. If it is not set to draft then set draft and see if it comes out lighter, and if it does then it may be an ink issue and you may need to clean the print head. This will be somewhere in the "Print Maintenance", again somewhere within the settings.
I hope that helps.

Mar 04, 2016 | Printers & Copiers

1 Answer

Epson C86: paper not feeding and prints at an angle


try feeding the paper through manually if you cant do this then try printing a blank page and see if this still wrecks the paper if it does then it does sound like something is jammed on the roller the best way to clean this is with a blast of air from a compressor this is the only sollution as it will cost more to replace the parts than it would to buy another printer if it is still under warranty they should replace it for you if not you could take it to a computer repair shop where they will strip it down adn rebuild it for you this is a paper feed problem but im sure their must be somethig sticking in the way or maybe the paper feed has come lose at the one end sorry i couldnt help you any more ........................................

Oct 31, 2007 | Epson Stylus C86 InkJet Printer

1 Answer

Troubleshoot/hpDeskJet 895Cse printers,how to cancel a print job


Print jobs are kept in a print spool on your computer. Turning off your printer only clears the printer. To clear the print spool on a Windows type computer, look for the printer icon on the task bar, lower right hand corner of the monitor. Double click on the small icon will open the list of pending print jobs. Select the one you wish to delete, then cancel the print job.

Feb 18, 2015 | Printers & Copiers

1 Answer

LQ 300 +2 auto pause during printing


This is a feature provided by the manufacture to protect the print head overheat for small dot matrix printers. Here giving printer head connection diagram, the last two row have temperature sensing (thermister) connection pin 1 to 1. If the thermister is faulty in the print head the printer will auto pause abnormally. Check the printer with compatible / EPSON recommended print head. These kind of small printer only for POS printing not for continues printing. 2_17_2012_8_31_04_am.jpg

Feb 16, 2012 | Epson Dot Matrix LQ-300+II Printer

1 Answer

Printer isn't printing properly


your cartridges are goggled try cleaning them from maintenance menu of your printer 

May 01, 2010 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Printing to small fonts


Please check the paper settings of the printer. for example If the paper selected is A3 and the printing matter is on A4 then this problem may occur. If my solution proves helpful kindly rate my solution.

Mar 25, 2009 | HP PhotoSmart C4480 All-in-One Printer ...

1 Answer

Printing w.lexmark e232 font way too small


I believe LEXMARK has upgraded the software for you printer with a new VISTA driver. Disconnect the printer, uninstall the software . Reinstall the software for you model from theLEXMARK  link I have provided you below:
http://downloads.lexmark.com/perl/downloads/downloads.cgi

Feb 07, 2009 | Lexmark E232 Laser Printer

1 Answer

Black ink printing is smudgy & illegible colour ok


if your printer can open up i can help if not i cant open up the printer and clean it dont touch any cables it could mess it up then clean the ink box. clean it where it was dont touch any cables and reclean everything then test

Dec 16, 2008 | Canon MultiPASS MP370 All-In-One InkJet...

1 Answer

Will not print from computer


Hi ktvp
Do you get any kind of window pop up when you try to print, like "the computer cannot communicate with the printer"?

My suggestion is the following. Reboot the computer when it comes up go to "control panel" and click on "printers", select your printer and click on properties and try to print a test page. If it prints, check your cable connection running from your printer to the computer, especially on the printer end.

Good luck Loringh PS please leave a rating if appropriate Thks

Nov 26, 2008 | HP Printers & Copiers

1 Answer

Small prints


  1. Click here (http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=15403)
  2. Halfway down the page type this in the "Please enter your question:" field "print too small"
  3. Click the search button
  4. I believe the first article is what you're looking for.

May 30, 2008 | Canon PIXMA MP470 All-in-One Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

old marine
old marine

Level 3 Expert

1463 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...