- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
gas range oven may prove useful for cooking and baking, they may fail
to ignite if they aren't properly maintained and set up. Lighting a gas
range often involves simply turning a knob; however, blockages from food
particles and debris caught in the burners, improper burner cap
installation and gas supply are common problems that interfere with your
gas range oven's performance. A few troubleshooting guidelines may
solve these problems safely.
Check you have gas in your tank if your gas range oven won't heat. Contact your gas supplier if you've run out of gas.
Clean the burners if you have gas but your burners still
won't ignite. To clean the burners, lift the burner caps
Inspect the small vertical holes on the side of your burners
for dirt, food and debris. The gas won't ignite if they are clogged.
Scrape dirt, debris and food from the vertical holes using a pointy
object such as a toothpick or paperclip.
Reinstall the burner caps properly. If they are tilted or
wobbly, the gas may not ignite. Install the caps on the right burners.
Some burners are smaller than others, so match the caps to the
Move the burner knob to the "Lite" position and wait for the
gas to ignite. If it ignites, rotate the knob to your desired setting.
If it doesn't ignite, contact a qualified appliance technician.
Usual faults in this order are: Faulty oven element - check element for holes, blow marks etc; Burnt off wiring at the oven element terminals - check terminals; If the oven indicator lights when the oven is turned on it should be the above. If it does not refer below; Electronic clock set to auto. mode instead of manual mode.
According to your symptoms, it appears that you will need a new electronic oven control board. If nothing on the range heats, you could have a tripped breaker on the 120 volt L2 leg of 240 volt power. This would prevent the cook top burners and the oven elements from heating.
The oven bake element has burnt out and needs replacing. Shut the power off to the range. Remove the element mounting screws located inside the oven above or below each end of the element. Carefully slide the element out, disconnect electrical wiring. Install new element.
We had the same thing happen and now they came and said it was the clock that needs to be replaced. They said that controls the oven. Even though clock is on and working the function for turning on the oven is not
1, check your power, locate your breaker for the range. turn the breaker off and turn it back on.
Your Range it is electronic control on the Oven but not the Stove Top heating elements.
After you reset the breaker and it still not work.
Please let me know more about the unit.
When you purchase.
How/when it happen.
What is the indicator showing.