Question about Sentry Fireproof Safe

2 Answers

Batteries are dead can't open safe

We went on vacation and when we got back we could not open our safe as the battery was dean and now we are stuck.How can we get it open ? It won't open weith dead batteries

Posted by on

  • jeninei Jul 27, 2008

    We've replaced the batteries (with known good ones) and there still aren't any indicator lights - the door still won't open with combo

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem. We finally located where the batteries were hidden. They were below the keypad, There is a silver, plastic cover that slides to the right to expose the 4 AA batteries. Hope this helps you.

Posted on Jul 14, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have an older Baker Safe (batteries are inside the safe). Rick put the key in - turned it 1/4 turn and then pulled it out. The safe then popped open.

Good luck!

Extra info - call Rick at KitchenExpo.com

Posted on Oct 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sentry safe S3877 the batteries were replaced with new it still gives the error beeps for batteries need to be replaced the safe will not open, how can I get the safe to open?


A1 Locksmith Burlingame CA Once you get the error light that means you are entering a user code that was deleted when the batteries went dead . Simply replace the batteries then use the master code in your owners manual to open the safe. Reprogram new user code instructions bottom of this page.

Apr 17, 2013 | Sentry Fireproof Safe

1 Answer

Change the battery then shut the safe now putting the code it wont open


user code was deleted when the batteries went dead . a1 locksmith recommends replacing the batteries then use the master code in your owners manual to open the safe. Reprogram new user code instructions bottom of this page.

Feb 03, 2013 | Sentry Fireproof Safe

1 Answer

Safe will not open


Once you get the error light that means you are entering a user code that was deleted when the batteries went dead . Simply use the master code in your owners manual to open the safe. Reprogram new user code instructions bottom of this page.

Jan 24, 2013 | Sentry Safe GM1459E

1 Answer

Gm1459e E-lock will not take combintaion


Once you get the error light that means you are entering a user code that was deleted when the batteries went dead . a1 locksmith
recommend replacing the batteries then use the master code in your owners manual to open the safe. Reprogram new user code instructions bottom of this page.

Jan 23, 2013 | Sentry Safe GM1459E

1 Answer

How do we see the ecode number on the safe?


Once you get the error light that means you are entering a user code that was deleted when the batteries went dead . Simply replace the batteries then use the master code in your owners manual to open the safe. Reprogram new user code instructions bottom of this page.

Jan 22, 2013 | Sentry Fireproof Safe

1 Answer

Present message error


Once you get the error light that means you are entering a user code that was deleted when the batteries went dead . Install new batteries then simply use the master code in your owners manual to open the safe. Reprogram new user code instructions bottom of this page.

Jan 16, 2013 | Sentry Fireproof Safe

1 Answer

I have a sentry safe model so500 & the batteries are dead, so I can't open it. I know the combination, I just can't open it! HELP!!! thank you, Lesley


Locksmiths agree on How to install sentury safe batteries
slide open the battery cover located just below the keypad.
Insert a paper clip or pen point into the small hole in the cover. Push in while sliding cover to the right. Disconnect and remove the battery holder. Insert the 4-batteries as indicated.
reconnect the connector and put back the battery holder. Slide the cover back in place.

Aug 07, 2010 | Sentry Fireproof Safe

5 Answers

Sentry safe S3877 have key and know combination but battery dead


Use paperclip to push in pin size hole below keyboard and then slide panel to right. Battery box is right there. Replace batteries and then was already to accept code.

Apr 08, 2009 | Sentry Fireproof Safe

1 Answer

Sentry S3807 safe-cannot open


locksmiths agree on how to install sentury safe batteries
slide open the battery cover located just below the keypad.
Insert a paper clip or pen point into the small hole in the cover. Push in while sliding cover to the right. Disconnect and remove the battery holder. Insert the 4-batteries as indicated.
reconnect the connector and put back the battery holder. Slide the cover back in place.

How do I insert the batteries on my advanced electronic lock safe?
to install batteries, turn the electronic lock case to the right and remove.Insert four new batteries as indicated, replace the electronic lock case and turn to the left to reassemble.

Jan 26, 2009 | Sentry Fireproof Safe

Not finding what you are looking for?
Sentry Fireproof Safe Logo

3,600 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sentry Safes Experts

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

xenophanes

Level 2 Expert

42 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a Sentry Safe Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...