The printer botton is not turning on, copier an fax looks ok, network is working fine, but I can't print or scann... Copier was stored in my warehouse for 1 year and I don't remmenber if a need a cable to conect GL-1010 to the copier, t6he unit is attached on the back of the copier but have a 3 serial ports........It was working fine before.....any help or picture for the back will helpfull... thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you must connect the machine with you're computer.you want the fax you must check the you're photocopy machine have a fax board.you want the scan & printing connect the photocopy machine to the computer.(network cable)
if there is a username and passowrd you log in. then at the bottom right of the screen you will see a job status button. if you press it it usally opens up to the jobs list .. if not after you press it look on the top of the display and select job status or print status. the select the job you want to delete and press delete.
NOTE: if your machine has a fax you cannot delete fax jobs without doing an all reset!
Toshiba es166 is local USB printer. You can print from designated PC and you have to share printer if you want to print from other printer in your network. Because of low machine memory (16Mb) it could be some conflicts,if you use more than 2 PC in network. That is why Toshiba has es167 model on which you can add network print controller. You can also use USB hub if you want to print from more PC's. (only 2 brands of USB hubs provide this, see toshiba site)