Question about HP LaserJet P4014n Printer

1 Answer

I want to connect a HP P4014n Laserjet Printer up to another computer but I do not have this installation disc, how can I get this printer working on another computer?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Download the driver / software from hp website.
if your system is connected to the network / router, your system should recognize your laptop or another system (same workgroup).
add new printer see if the system recognizes else. add the printer by providing the printer ip address. (test print from your printer and will provide the ip address)

Posted on Oct 01, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

If I'm receiving Error 58.04 on th HP laserjet P4014n How do I shut it off?

this code comes from defective power supply or dc controller

Jul 13, 2014 | HP LaserJet P4014n Printer

1 Answer

Hp laserjet p4014n error code 49.4c02

First unplug the network cable and/or USB cable and restart printer. If it comes to ready then the correct first step for all 49 errors on HP printers is to update the printer firmware to current revision. Most 49 errors are caused by programs sending commands that are not recognized. Adobe is the worst for this. The best way to update firmware is to connect via a USB cable and use the EASY Firmware update utility for your model.

Apr 17, 2014 | HP LaserJet P4014n Printer

1 Answer

My Hp Laserjet P4014n is giving error 57.07 after I repaired the power board

It means that the laser beam of your printer is not detected.
Try to change the printer toner.

***If you need any technical help on printer then you can reach at

Mar 19, 2013 | HP LaserJet P4014n Printer

1 Answer

HP P4014n LaserJet Printer Close top cover won't close

the most common problem that causes the top cover not to close is the toner cartridge not being seated. Pull it out and reseat it.
Why did you open the cover in the 1st place. If it was to install a new cartridge, try putting the old one back in. If it works, the replacement has a problem.
If the cover doesn't close with the toner cartridge removed, then there probably is a linkage problem. Something may be broken, like the "print cartridge drive arm".
Go out to

Oct 10, 2011 | HP LaserJet P4014n Printer

1 Answer

Hp laserjet p4014n ... when print job sent to printer, it hangs up on "processing" and never prints

First tray to print from tray1 (bypass), if it's ok then
do firmwareupgrade if the machine has firmware available. If, afteryou upgrade the firmware, you get a 50.9 error for fuser overtemp, then youneed to replace the fuser after checking all connections on the DCC and fuser.

Jul 08, 2011 | HP LaserJet P4014n Printer

1 Answer

I unplugged my HP P4014n printer to spray some

Check the main fuses on main board, check lithium battery,...

Jun 30, 2010 | HP LaserJet P4014n Printer

Not finding what you are looking for?
HP LaserJet P4014n Printer Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

1089 Answers


Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides