Question about RCA Scenium HDLP61W151 61 in. HD-Ready Television

1 Answer

My rca senium is screaching loudly off and on constantly and losing its picture,it even screaches when its turned off.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,284 Answers

Usually noises that are heard even while the TV is in the off state are power supply issues. Something is off frequency or a coil/tranformer is vibrating at a high rate. The part number for the power board is 263973 but the board is no longer available. If the power supply is going off frequency the voltages will change and possibly cause the set to loose its picture. If its just a mechanical vibration then picture loss could be because a failing lamp.

Posted on Sep 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Subaru Impreza Sedan; Couple different noises


the screaching noise is 1 of your belts needs to be tightened. noise from the right front tire sounds like a bad sturt or ball joint and that needs to looked at

Jan 07, 2013 | 2000 Subaru Impreza

1 Answer

Two tone screaching sound


In most cases the cause would be bad capacitors in the power supply. You can get repair kits from sites like www.TvRepairKits.com to fix this

Oct 07, 2012 | Televison & Video

1 Answer

Philips TV turns off and on and has a very bad picture


Check electrolytic capacitors on the power supply board for bulged tops.

May 10, 2010 | Televison & Video

1 Answer

My dryer is making loud screaching noises. Everytime I turn it on to dry clothes is makes very loud screaching noises.


Sounds like it needs what are called glides or felt. This is what keeps the metal drum from contacting the metal housing. If this is let go too long the drum can be ruined

Dec 01, 2009 | Dryers

1 Answer

2001 Suzuki XL7 - engine has loud screaching noise when I start the engine, then it subsides after a minute or two. If I turn OFF the a/c before starting the engine, it doesn't make the noise. Where is the...


The blower is located under the passenger side however, the screech in the engine are is most likely a lose belt. Tighten or replace your belts and teh sound should go away.

Sep 14, 2009 | Suzuki XL7 Cars & Trucks

1 Answer

Tv is making a loud screaching noise and no pic or


Ur high voltage flyback transformer it dead.
U need a new one.

Aug 20, 2009 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Need blower wheel replaCDED?


If it was your blower wheel it would not make that noise first cheak and see if thewheel has play on the shaft if so then it will need to be replace second turn blower wheel by hand back and forht if there is a screaching sounds if is a dry bearing on the motor .If so if you can live with the sound it will not go right away if not remove motor and replace.If there is play on the wheel you will need clip pliers and normal pliers and remove both clip[ on shaft and clip on shaft revers after install new blower wheel good luck:)

May 07, 2009 | Maytag PYE2300AY Electric Dryer

1 Answer

Acheiver CCS5000 screaching noise


A piece of metal or coin might have gone into the shredder.

Apr 22, 2009 | Achiever CCS5000 Shredder

1 Answer

Loud niose from centre of manafold motor run nice & smooth ?


on the 302 you can not see the cam and lifters unless you remove the manifold. did you try removing the distributer and turning the oil pump shaft until the light in the dash goes out? that will drive oil to the upper cylinder assemblies, other than that you may be looking at replaceing some damaged bearings and or camshaft.

Apr 03, 2009 | 1978 Ford Granada

Not finding what you are looking for?
RCA Scenium HDLP61W151 61 in. HD-Ready Television Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73635 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...