Question about Pride Mobility Products Used Jazzy 1120/2000 Electric Wheelchair

2 Answers

Disconnecting and reconnecting the cord attached to the controls is the only way I can get the power to come on. The key switch won't turn it on and I tried the magnetic key. It will shut it off once I have gotten it on, but it will not put it back on. Is there some way to make the on/off key switch work?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Sometimes ANY type of magnet can be used.

Posted on Jun 02, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 692 Answers

Laurel you probably have no battery voltage. If the batteries have been in the chair for awhile and haven't been kept up then you will need to replace them. The batteries you need are U1 and you need 2 of them. Hope this helps

Posted on Sep 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can a 1998 ford windstar be hot-wired?


Do not damage the key reading transponder but a i think a new barrel might cure the problem ,yes you could hotwire it to move it but make sure the key is in to stop the steering lock coming on and to be read by the transponder to release the immobilisor

Dec 30, 2013 | 1998 Ford Windstar

1 Answer

My washer is locked won't open


Will Not Unlock
• Press off. The motor control is not responding if it
takes 4 minutes to unlock. The motor control is
either bad or disconnected.
• Unplug and reconnect power cord. Wait 20 seconds
for machine to unlock.
• Check lid locked switch circuit. Circuit should be
closed at machine control.
• Check for loose electrical connections at lid lock and
at machine control board.
• Push lid closed to make sure nothing from inside is
pressing against it which may keep it from unlocking.
• If necessary, remove clothes by disconnecting power

to washer, and open top cover with a putty knife.Here is the part to order.


Regards,
Richard Roth
http://appliancecafe.com

Nov 13, 2012 | Maytag Neptune FAV9800AW Top Load Washer

2 Answers

I have Kirby sentria that shuts off while using the rug attachment and won't start until I change to the hose attachment. I have had it in Kirby repair store 5 times, cord replaced. Took it back t


power switch faulty, slow speed terminal inside switch is burnt,hence

intermittent fault, hose uses second speed different lever inside switch

Oct 12, 2012 | Kirby Vacuums

1 Answer

HP Pavillion a1514n Won't Turn On


Hook a monitor to the video output, if no change! the video graphics chip is bad located on the motherboard.

Jun 29, 2012 | HP Pavillion dv9740us Notebook

1 Answer

Washer won't turn on at times. It acts like it has no power. Unplugging electric cord from wall socket and reconnecting seems to reset the unit and it functions normally for a while. After an hour or...


Try this first, unplug the unit and connect it to a different outlet and see if it corrects the problem. If it still continues, you will need to replace the control board. Good luck.

Jun 18, 2011 | LG WM2301HW Front Load Washer

1 Answer

Wont start, error code f01


The F01 error code indicates a communication error between the Central Control Unit (CCU) and the EEPROM onboard the CCU occurred. This type of failure generally requires replacing the Central Control Unit (CCU). You could try disconnecting the power cord for a couple of minutes and then reconnect the power cord. If it continues to flash "F01" I recommend calling a service technician to remove and replace the CCU.

Jan 16, 2011 | Dryers

1 Answer

How do you reset the blinking protect banner on the ag-v8520?


Try disconnecting the power cord then disconnect the speakers. Plug the power cord back in then hold in the power button until the unit "clicks." Then disconnect the power cord and reconnect the speakers, then the power cord and turn it back on.

Jun 13, 2009 | Teac AG-V8060 Receiver

1 Answer

Remote not working after disconnecting battery


If car Convenience Control Module(module that control key remote) lose power- remote adaptation to the car will be lost. This apply to some Audi models.
What you can try to do is:
1. Disarm alarm manually by opening door lock with the key
2. Put key into ignition and turn to on position (don't start the car)
3. Press few times remote button (with the ignition in on position)
Depends on your year model it my work (works on the newer models), if not you have to go to the dealership to program your keys.
Good luck!
Grzesiek

May 11, 2009 | 2003 Audi A4 Cabriolet

1 Answer

Accidently hit the key lock button


Hi

You can overcome this problem by disconnecting the AC power cord, to turn off the power. Then press and HOLD the select button and reconnect the AC power cord.

This should clear the Lock.

Hope it helps

Dec 08, 2007 | Sanyo PLC XU50 Multimedia Projector

Not finding what you are looking for?
Pride Mobility Products Used Jazzy 1120/2000 Electric Wheelchair Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Mobility Products Health & Beauty Experts

wcdoc1953
wcdoc1953

Level 2 Expert

278 Answers

Colin Taylor

Level 2 Expert

346 Answers

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

Are you a Pride Mobility Products Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...