Question about Car Speakers & Subwoofers

1 Answer

The radio doesn't all ways turn on. You can hit the reset button and it will come on and immediately turn off. If it comes on you can set the different stations. Once you turn it off nothing is held in memory. You have to start playing with it again. The cd player works. The model is #isCD3010X am/fm stero radio/compact disc player

Posted by on

  • 1 more comment 
  • casecox May 10, 2008

    jensen

  • casecox May 10, 2008

    You screwed me once, but you will not get a second chance!!!!!!! Where is your solution. I guess i missed something!!!!!!!!

  • casecox May 11, 2008

    only the radio does not come on when you press the on button. The radio will play once it is on if it comes on. There is no problem with the cd.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,944 Answers

Hi,

From which company is your unit?

Posted on May 10, 2008

  • Damen Wong
    Damen Wong May 11, 2008

    Sorry for the delayed response. Does this mysterious turn off only happen with the radio? When you are listening to CD's does it turn off by itself?

  • Damen Wong
    Damen Wong May 12, 2008

    So, the problem is only with the radio. Check the buttons that are related to the radio functions. Maybe one of them is stuck thus preventing normal operation.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 Pontiac Aztek, from the time I bought it, the display light in the radio doesn't come on(original radio) When the sunlight hits it the right way threw the sunroof, you can tell there is...


Sounds like the back light for the display has gone out. When that happens the clock will still work but the light is not their to push the display through. It is not cost affective to try and fix this just buy a new radio.

Jul 28, 2011 | Car Speakers & Subwoofers

1 Answer

Radio is stuck on the FM3 channel, volume doesn't work, tuner doesn't work, pressing any other button causes NO DISC message to flash and radio to turn off -2009 corolla


Does Front Plate remove from Radio? If so Pop face plate and look for small pin hole that a paper clip could fit in. This is reset for Unit. Otherwise disconnect car battery for a couple minutes. I had similar issue with a JVC unit, It needs to be hit over its head to wake up.

Jan 19, 2011 | Car Speakers & Subwoofers

1 Answer

I have a 2000 chevy venture and the radio it just locked pleae help me it is driving me crazy


Taken from:
http://autoforumz.com/Pontiac-Help-u...pict40505.html

GM DELCO THEFTLOCK RADIO UNLOCK CODE:
1. Press and hold presets 2 and 3 for about 5 to 10 seconds until you
get 3 digits on your display. This is the first 3 of 6 digits you will
need, so write 'em down.
2. After doing step one and writing down the code, immediately press
the
AM/FM button to get the last 3 of the 6 numbers you'll need, and write
'em down. (if you wait too long between steps 1 and 2 and the LOC code
displays again, just start over).
3. Call this number, it's a prerecorded message, so don't worry about
having to talk to anyone...1-800-537-5140. The voice will ask if
you're
calling for Chevy, Pontiac, Cadillac, etc... When you here him tell
you
to press "2" for Pontiac, press 206010 and hit the # key. He'll ask
you
for the 6 digit code that you've written down. Enter that and press
the
* key. He will then give you a code, and the option to get additional
4
digit codes, but one should be sufficient.
4. Follow the normal procedure in your owners manual for unlocking the
radio with your new code...press the hour set button on your radio
until
you get the first two numbers of the code, then press the minute set
button until you've entered the last two numbers. Immediately press
the
AM/FM button once the correct code is entered and the code SEC or
"secured" will be displayed on the display screen. Now, just turn the
radio on, and your ready to roll.
There is an additional step you can take to remove all codes from the
radio and start from scratch by entering your own personalized 4 digit
code so that it won't get you in a pickle again! Just repeat step 4
and
you should get a display screen that reads ---. This means the code is
out, and you can now program your own code. Of course, once you
receive
the 4 digit code from the GM recorded message, just keep it in a safe
place, because you can use that same code again and again should you
have any more problems with it in the future. Good luck

Oct 05, 2010 | Car Speakers & Subwoofers

1 Answer

I have a jvc car stereo , doesnt keep the bass and treble settings but keeps the radio stations , any ideas ?


I have a JVC deck and only way to accept the setting is to hit the volume button to accept the setting, if I don't it won't keep the setting.

Sep 19, 2010 | JVC Car Speakers & Subwoofers

1 Answer

GM Radio Locked but will not display codes by pressing 1&4 or 2&3


Does your GM car or truck Radio display LOC and does not turn on? Chevrolet, Buick, Pontiac, GMC, Cadillac, Oldsmobile vehicles used a theft system to lock the radio when power is lost. This system was used from the ealy 1990's to the early 2000's.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Instructions:
  1. If your radio displays the word LOC, you can retrieve a set of factory numbers in the radio that enable you to get a backup unlock code. If the radio says INOP, you will have to leave the key in the "ON" position, or let the car run for at least 1 hour before you attempt any unlock procedure. INOP means a secondary theft lock due to too many false attempts to unlock the radio.
  2. Looking at the face of your GM Delco radio, hold down the preset buttons 1 & 4 OR 2 & 3 (Depending on year and model) for approximately 10 seconds or until a set of 2 or 3 numbers comes up on the display. Write the numbers down.
  3. Next press the AM / FM button. A new set of 3 numbers will now show. Write these numbers down. You will then need to call a 1-800 phone number with these numbers to get the unlock code. There are many sites on the internet that can get it for you- for a small fee. Or, try calling your local GM Dealer and ask for them to do it. Many times they will do it for free. It only takes a minute.
  4. Once you have the unlock code, enter it by pressing the MIN button until the display shows the last 2 digits of the unlock code, then press the HR button until the first 2 numbers or shown. Then press the AM / FM button to enter the code. The radio will now display SEC, and normal function is restored.
Also, its possible that you need RESET your GM Radio; this is the procedure: While performing maintenance on your car, you may disconnect the radio from the battery in your GM vehicle. GM cars contain Delco radios that are protected by Theftlock, which locks the radio after it has been disconnected from a power source. Iit can only be reset and unlocked with a car-specific security code. Identifying the security code for your GM vehicle is the only way to reset the car radio and disable the Theftlock protection device. jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Instructions:
  1. Turn on your car. Your Delco radio will show "LOC" in the LED display.
  2. Press and hold down both the second and third preset buttons. Hold these buttons down for at least six seconds.
  3. Write down the two- or three-digit code that appears in the LED display.
  4. Press the AM/FM button on the radio.
  5. Write down the next two- or three-digit code that appears in the LED display. You should be left with either a four- or six-digit number. Turn off your car.
  6. Call the Delco radio automated customer support line at 1-800-537-5140.
  7. Press "1" and then press the pound sign. The automated voice should respond "Invalid code, try again."
  8. Enter the number 139010 into your phone and then press the "*" sign.
  9. Enter the four- or six-digit number you wrote down from Steps 3 and 5, and then press the "*" button.
  10. Write down the four-digit code given by the automated voice.
  11. Turn on your car. Enter the Delco unlock code using the procedure outlined by your GM owner's manual. Normally, the unlock code is entered with the "HR" and "MN" buttons on your radio.
  12. Press the AM/FM button. If you have entered the code correctly, your LED display will read "SEC" and the radio will be unlocked.

Hope this help.

Mar 18, 2010 | Car Speakers & Subwoofers

1 Answer

Bass hits when i play the radio but not when i play a cd


Dont assume because you have set the bass and treble options for your radio that they will work for your cd, press the source button until you come to cd and then set your bass and treble again, hope this works

Dec 19, 2009 | Car Speakers & Subwoofers

1 Answer

Driving along and radio stopped working, the word "ocer" came across face of radio. Now, radio and cd player both will not work. Help!


I pushed the reset button and "standby" mode appeared. I proceeded to hit the source button and switched to tuner and cd player with no problems.

Jul 02, 2008 | Kenwood Car Speakers & Subwoofers

2 Answers

Car speakers


the speakers have were not ur problem the radio was. the speakers can only go as high as the radio can. there r 2 ways 2 slove this get a new radio, or add a amp to run the speaker. contact me if u have any more ?s.

Jun 21, 2008 | Infinity KAPPA 62.1I Car Speaker

1 Answer

Need 1998 montero sport radio reset code


GETTING THE RADIO SERIAL NUMBER: <BR>
2000 - Carefully take the front panel off that surrounds the radio and temperature buttons, it will snap straight out. Wiggle the radio out about two inches, it is a tight fit. Get the serial number off the radio. It is on a sticker on the top, left side. Call a Mitsubishi dealer with the serial number. They will want proof of ownership, so have the title ready. After putting in the four digit serial number, hit the cd button and that enters it.The code is also written on an antitheft card that comes with the car and may be written in the owners manual in one of the back pages.
<BR> 1999 - Carefully remove the cup holder by pulling it out, then you will see the sticker with the radio serial number.
<BR> Other Years - I don't know an easy way to get the radio serial number, find a radio install savy person and ask them to help you. My dealership said they would do it for me and charge me for 30-60 mins worth of labor.. (At $75/hour) <BR> <BR>
RADIO SAYS "OFF" OR "LOCK": <BR>
Leave the "off" display on for 1 hour uninterupted, then it will automatically reset back to UNLOCK CODE.
<BR> When you turn it back on again after that time has passed it will ask for "code". <BR> <BR>
RADIO SAYS "UNLOCK CODE:" <BR>
Call your local MItsubishi dealership and ask for the service department.
<BR>They have a computer program where they punch in the serial number from your radio (you have to supply the number) and it will tell them the UNLOCK CODE for your radio. My dealership offered to give it to me free over the phone, if I knew my radio serial number. Enter the code using the buttons on your radio. And write the code down, this will show up everytime your radio looses connection to its power source - the car battery.

May 27, 2008 | Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Speakers & Subwoofers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...