Question about SanDisk Sansa c150 MP3 Player

1 Answer

ScanDisk Sansa C150- ScanDisk Logo blinking and can't do anything

Hi All,

My scandisk Sansa c150 is not working. When I switch on the player it shows me ScanDisk blinking logo and I can't do aything. The logo is Blinking after 9 seconds. Can anybody guide me what to do now?

Posted by on

  • Anonymous May 13, 2008

    In my scandisk sansa c 150 logo is blinking after every 9-10 sec
    and non of the kyes r working
    even whn i removing the battery n connecting to my pc, thn too same problem is occuring
    plz
    can anybody suggest me the solution

  • Anonymous Jun 11, 2008

    I am having the same problem who has a solution????????????
    It is blinking the SanDisk logo, removing the battery or pluging into the computer will not help.


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My mp3 player don't work properly..
when i plug mp3 players in my pc it work properly... after that when i unplug it my mp3 player doesnot work upto now.
when i switch on that it will display only scandisk logo.. then that it will not work.
then to switch off that i should take out battery.. you have any solution..
after that the pc also don't detect that player

Posted on Aug 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C150 as not working what's solution?


1

Check the orange "Hold" switch on the left side of the Sansa C150, if you cannot turn on the MP3 player or if none of the buttons is working. When the "Hold" switch is up, the buttons are disabled. Slide the "Hold" switch down to activate the buttons again.
2

Press and hold the "Power" button until the LCD screen lights up when turning on the MP3 player. Pressing the button quickly does not turn on the device. The "Power" button is located on the front of the device, under all the other control buttons.
3

Replace the AAA battery, if you cannot power on your MP3 player. To replace the battery, remove the battery cover from the back of the device by pressing in on its tab and pulling it off. Remove the old battery, insert the new battery and replace the cover. One AAA battery provides approximately 15 hours of power for your Sansa C150.
4

Change the backlight settings to conserve battery life. This is useful if you find the battery loses power quickly during normal use of your Sansa C150. To change the backlight settings, choose "Settings" to bring up the "Settings" menu. Select "Display," "Backlight" and then a shorter backlight time. The backlight will shut off after a period of inactivity that matches your backlight setting.
5

Review your music purchases to understand what rights you've purchased to the content, if you are unable to play a track back on your Sansa C150. When you purchase music, it comes with certain rules for how you can store and play it. You may not have paid for the right to transfer the song to a portable media player.
6

Reset the Sansa C150 if it acts erratically or if you have other problems. To reset the device, open the "Settings" menu and choose "Reset All." Choose "Save" to finish restoring the MP3 player to its factory default settings. If you decide not to reset the device during this process, select "Cancel" instead of "Save."




~KenjiFox

Jan 07, 2011 | SanDisk Sansa c150 MP3 Player

2 Answers

Sansa c150 not working properley please repair it


I have 1 g used and it wont let my load anymore and all the songs come up as A is my player dead
thanks

Oct 02, 2008 | SanDisk Sansa c250 (2 GB) MP3 Player...

1 Answer

Not Doing Anything Sansa c150


go to my computer when it is plugged up and delete the music from the harddrive of the player.

May 16, 2008 | SanDisk Sansa c150 MP3 Player

1 Answer

How to fix my mp3 player...????


See my problem posting and do not be frightened.
Santapede

Jan 11, 2008 | SanDisk Sansa c150 MP3 Player

1 Answer

Deleting songs


change your usb settings to MSC, perform the delete, and change back.

Nov 21, 2007 | SanDisk Sansa c150 MP3 Player

1 Answer

C150 MP3 Player Problem


Sounds like you formatted your MP3 using windows explorer....in that case you need to reinstall the firmware on the device and once you do that...you should be able to transfer the songs to the device...

Nov 13, 2007 | SanDisk Sansa c150 MP3 Player

1 Answer

Scandisk c150 hangs


You may need a recovery disk. Was there not one with the mp3 itself? Good luck anyway!

Sep 11, 2007 | SanDisk Sansa c150 MP3 Player

1 Answer

Not playing


Try connecting it to the computer without the battery. If it shows up, format it. My Computer>Sansa c150>Right click and select format. If that doesnt work, you will need to call Technical Support for a firmware "rollback". SanDisk Technical Support 1-866-726-3475 Best of Luck.

Sep 11, 2007 | SanDisk Sansa c150 MP3 Player

1 Answer

MY Sandisk c150 keeps blinking when turned on.


You have probably corrupted it. Plug it back into the computer- reformat if you must and do it properly as you know you should. You may wind up buying another

Aug 14, 2007 | SanDisk Sansa c150 MP3 Player

1 Answer

Delete demo files on Sandisk c150?


The demo songs still don't show up when I select "Show hidden files/folders". I had go to Menu->Settings->Format, and proceed with formatting it to get the demo songs off my Sansa c240 (This will delete all songs/files).

Dec 31, 2006 | SanDisk Sansa c150 MP3 Player

Not finding what you are looking for?
SanDisk Sansa c150 MP3 Player Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk MP3 & Digital Media Players Experts

kakima

Level 3 Expert

96372 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a SanDisk MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...