Question about Packard Bell (181368) Motherboard

3 Answers

I upgraded the RAM on a Packard Bell iSTART 1379 and upon restarting there was a continous beep sound. I replaced the original RAM but it still beeps. I have unplgged all periferals including the hard drive then put them back on one at a time but if still beeps.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Got the same problem with the computer i repaired. i replace the 128 SD RAM with 512 SD Ram using 300 wattz PSU and all i get is continues beep which means mother board error... and in the end of it all i replace my PSU with 350 watz just to power the 512 SD RAM now its working good

Posted on Oct 22, 2011

  • eric
    eric Oct 22, 2011

    in my experience. upgrading means not just replacing your peripherals with a bigger one ,also consider adding power by replacing your power supply or you might end up short in power supply resulting to mother board error

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Clean your RAM port(remove dust ).

Posted on Sep 16, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 56 Answers

Check your processor heat.http://www.hardwaresecrets.com/article/143

Posted on Sep 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Packard bell s3270


You can have a much as 8GB (2x4GB) RAM in the device. Here is a video that explains how to access the RAM. Good luck!


How to upgrade memory in Packard Bell OneTwo Computer

Apr 17, 2014 | Acer Computers & Internet

1 Answer

Cannot find specification for packard bell i start 1379. I want to look into the possibility of upgrading this pc. Can anyone point me in the direction of the specs being available online for this...


Here is the homepage:

http://www.packardbell.co.uk/pb/en/GB/content/download

This specs provided was complete with a Intel Intel Serial ATA-300 ATA-133 PCI 160 GB Microsoft Windows Vista Home Basic , ATI Radeon Xpress 1100 128 MB 4 MB . The Desktops memory add up to 2048 MB , with standard memory 512 MB , memory installed 533 Mhz DDR2 SDRAM DIMM 240-pin Very low profile PC4300 Compact Flash Type I with 2 Expansion Sockets/Slots.

You can update the graphic, by adding a better graphic card, on the mainboard.
The ram can be upgraded to 2 gb ddr2 ram.
A bigger harddrive, can be added, for more space.
The cpu will be hard to find, it probably have socket 775, but this cpu is not available anymore.
And not all cpu`s will fit the mainboard.

Good luck

Feb 10, 2013 | Packard Bell (181368) Motherboard

2 Answers

I have this motherboard PACKARD BELL BV GA-T671MG. how much ram memory can it have? can i use ddr3? my pcie port supports a 2.2 graphic card?


System
System : PACKARD BELL BV ISTART F2310 AIO
Mainboard : PACKARD BELL BV GA-T671MG
Bus(es) : ISA AGP PCI PCIe USB
Multi-Processor (MP) Support : 1 Processor(s)
Multi-Processor Advanced PIC (APIC) : No
System BIOS : Phoenix Technologies, 255.255
Total Memory : 767MB

Intel Pentium D 3.00GHz
Packard Bell BV (GA-T671MG)
SiS chipset (Si671V11)
DDR2
1024mb ram

PACKARD BELL BV
Model GA-T671MG

Chipset Vendor Silicon Integrated Systems (SiS)

CPU Intel Pentium D
Cpu Socket LGA775 [Socket 775]
Processor Upgrade ZIF Socket
Max CPU Speed 3000 MHz

System Slots 2 PCI, 1 AGP

Memory Summary
Location System board or motherboard
Maximum Capacity 1024 MBytes
Memory Slots 2
Error Correction None
Use System memory
Maximum Memory Module Size 4096 MBytes

Manufacturer PACKARD BELL BV
Model GA-T671MG

Chipset Vendor Silicon Integrated Systems (SiS)

CPU Intel Pentium D
Cpu Socket LGA775 [Socket 775]
Processor Upgrade ZIF Socket
Max CPU Speed 3000 MHz

System Slots 2 PCI, 1 AGP

Memory Summary
Location System board or motherboard
Maximum Capacity 1024 MBytes
Memory Slots 2
Error Correction None
Use System memory
Maximum Memory Module Size 4096 MBytes
it seems this might vary i have listed 4
hope this helps

May 17, 2011 | Computers & Internet

2 Answers

I need help please i am looking for sound card driver HP PACKARD BELL iSTART C2389. I am running Win XP SP3.


here you go: http://www.driversforfree.com/omn_ofm_omd_dd/packard-bell/istart/c2389/packard-bell-realtek-hd-audio-driver/search.aspx
hope it works..

Feb 22, 2011 | HP Computers & Internet

2 Answers

Hi Guys I have a packard bell istart 1359, memory max is 2048mb and I currently have 512mb installed. I purchased 2 x 1gb ddr2 pc2-5300 -cl=5 -unbuffered -non ecc ddr2 - 667-1.8v -128 meg from crutial. I...


some systems require ECC it may be as simple as obtaining ECC Ram......u can try checking the memory that cam with it to see whether it is buffered and ECC if it is you will have to obtain same type of RAM

Apr 15, 2009 | Packard Bell iMedia 6826 (P481000502) PC...

3 Answers

Suitable psu for packard bell istart 1359


Unfortunately, no. See this link for a picture of your supply: http://www.cwc-group.com/fspgrfsposu2.html . It's considerably longer and narrower than a standard ATC power supply. This is typical of Packard Bell, e-Machines and many others.

Hope this helps!

Jan 31, 2008 | Computers & Internet

1 Answer

Packard Bell Laptop


Upgrade bios first...then load bios defaults in bios....solves most problems, if still no cd, borough one from friend,if still not....cd enclosure in side laptop faulty or broken...this happen if continous in and out sliding of cd. JJ

Sep 15, 2007 | Packard Bell Easy One Silver 2101 Notebook

Not finding what you are looking for?
Packard Bell (181368) Motherboard Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Packard Bell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Daniel Florin
Daniel Florin

Level 2 Expert

203 Answers

Are you a Packard Bell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...