Question about Compex MicroHub TP1008C Networking Hub

1 Answer

Lan my modem has only one ethernet jack.so how to connect it to the microhub i have? pls help i m new to networking

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

Hi - you connect the ethernet port on your modem to the wan port on your hub. You can then hook up your other devices to your hub. If this solves your problem PLEASE rate this as fixed. If it didnt, DO NOT RATE yet. Just add a comment letting me know you need more help and I'll be happy to assist you furter. Thanks and have a nice day. Remember if you need more help just add a comment.

Posted on May 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to first time d link connection and broadband for 2 PC. setup information pl.


Here is what you need to do.
1. Prepare the modem provided to you by your internet service provider. If you are wired broadband subsidiary......connect the phone line to the modem (if a splitter is attached make sure that modem labeled out is connected to the modem line input).
2. Now connect modem and d-link. Using a lan cable from the modem connect it to wan port of the d-link.
3. Connect the two pc's using another lan cable from the lan card at the back of your pc to the lan ports of the d-link.
That's the setup.

Try to turn all devices and the pcs and see if that connects.

If you are planning on accessing the ip configuration of the dlink, type in the address bar of your internet browser 192.168.0.1... default username is "user" leave password blank.

Should you have anymore queries, just post back.
Thanks
Mace

Dec 12, 2010 | D-Link DES-1008D 8-Port Ethernet Switch...

1 Answer

How to connecte d-link switch model-DES-1008D two same switch pls urgent


Sometimes we need to connect 2 switches, which can be done by using Ethernet Cable (CAT5 or 6). Just connect the cable to the LAN ports from one switch to another. Let me know the purpose of doing so that i may guide you better.

Hope this helps!

CreativeTECH

Nov 16, 2010 | D-Link DES-1008D 8-Port Ethernet Switch...

1 Answer

Got a hub genius GH4080SE and trying to connect computers, pls advise what is the steps?


Hardware Setup

1 Find the WAN or uplink port of the Ethernet hub. Typically, it is located on the rear of the unit, and it is often separate from the LAN ports.

2 Connect an Ethernet cable from the WAN port of the hub to either the Ethernet port of the internet modem or, if expanding a network, to an empty LAN port on the existing network’s router, switch or hub.

3 Plug an Ethernet cable into one of the LAN ports on the Ethernet hub and connect the other end of cable to the computer or device that will be added to the network. Repeat for any other devices that will need to be on the network.

4 Power up the Ethernet hub and the computers or other devices attached to it. On the front of the hub will be a series of LEDs that correspond to each LAN and WAN port on the hub. Every port that has a cable plugged into it should have one or more of the LEDs lit that represent that port. If not, check the connections and swap out the Ethernet cable if necessary.
Software Setup

1 Configure the network settings on each connected computer. If you are expanding a network and the network uses DCHP, or dynamic IP addressing, no configuration will be necessary. On networks using static IP addressing or on a new network setup using the Ethernet hub, each computer or device must be assigned a unique IP address. Local IP addresses must use the allowed “private” address pools that will not interfere with internet addresses. Acceptable addresses include 192.168.x.x, 172.16.x.x to 172.31.x.x, or 10.x.x.x. The “x” represents a number that is chosen by the user, from 0 to 254. All computers on the network should share the first three numbers in the address, with the final number representing the individual computer. In a network with three computers, for example, the first could be 192.168.1.1, the second could be 192.168.1.2 and the third could be 192.168.1.3, though the final number does not need to be sequential.

2 Click the “Start” button in Windows, select “Control Panel" and double-click the icon labeled “Network Connections.”

3 Right-click the icon for the Ethernet adapter and select “Properties.” Click on the check box marked “Internet Protocol (TCP/IP)” and press the “Properties” button.

4 Select the radio button labeled “Use the following IP address.” Enter a unique IP address for the computer and the applicable subnet mask. If a router is used on the network, enter the router’s IP address as the default gateway. Press the “OK” button and reboot if necessary.

5 Enable file and printer sharing from the “Properties” dialog for the Ethernet card if files will be transferred between the networked computers.

6 Click the “Start” button, select “Control Panel” and double-click on the “System” icon. Select the “Computer Name” tab and click on the button labeled “Change” to set the computer’s network name. In the “Computer Name” box, enter a unique name for the computer. In the “Member of” section, choose the radio button marked “Workgroup” and enter the workgroup of the network. If setting up a new network, this name can be change but all computers on the network must share the same workgroup name.

7 Verify that all computers can access the network and the Internet if connected.


Read more: How to Set up an Ethernet Hub | eHow.com http://www.ehow.com/how_4530475_set-up-ethernet-hub.html#ixzz0xnIzsGqa


see also Networking Diagram

Aug 27, 2010 | Genius GH 4080 SE 8-Port Ethernet Hub...

1 Answer

Which port do i plug in the ethernet cord from the modem. Zonet ZFS3008P and does any one have owner manual


Hi,

It is basically a switch so if you are planning to connect more than one computer using this switch than you need to connect a router in between modem and switch

modem -- > router -- > switch -- > computer

from your modem an ethernet cable will connect into an internet port on the router and than from LAN port of a router cable will connect into any port on your switch.

Let me know in case if you need more help :)

May 10, 2010 | Zonet ZFS3008P 8x10/100 Mbps Networking...

1 Answer

I have some problem with my D-link Des-1008D switch.I used it to connect 2 computer in my home and one cable form Internet shop.At that time, that Internet shop used manual IP to connect PC.And then That...


Does your ISP supply _one_ or _two_ IP-addresses per account?

On each computer:
Click Start
Click Run
Type CMD and press ENTER
Type IPCONFIG and press ENTER

What "IP-address" and "gateway" do you get for each computer?

No, a "driver" for the switch is not necessary, and will not help.

Instead, buy a "router" (with or without wireless capability), and rewire your network:

Cable-modem -> Ethernet-cable -> WAN-port on router

LAN-port-#1 on router -> Ethernet-cable -> Computer #1
LAN-port-#2 on router -> Ethernet-cable -> Computer #2

Turn the cable-modem off.

Turn the cable-modem on.

Turn the router on, to get one IP-address from your ISP.

Restart each computer, to get new IP-addresses for each computer.

Within the web-browser on each computer, disable "auto detect proxy".

Nov 16, 2009 | D-Link DES 1008D (DES-1008D) 8x10/100 Mbps...

1 Answer

Same thing as above, want to se up a LAN connection


Once you connect the 2nd switch - you must power down the cable modem and the original router along with all PC's connected to the network.
Then power up the cable modem,wait 2 minutes,
power up the router - wait 2 minutes, then power up all the switches. Once all downstream devices are on - power up all the PC's and you should be OK.

Sep 13, 2009 | D-Link DES-1008D 8-Port Ethernet Switch...

2 Answers

D-Link DES1008D 8 port fast ethernet desktop switch


By using it, of course you have this items to connect it with internet:
  1. UTP Wire with Connectors at end each PC or Client Workstation.
  2. Make sure every PC or Client Workstation have its own LAN Card.
  3. To connect on the internet is to know what is IP Address, Gateway Address & DNS Server Address settings on your LAN connection.
  4. Lastly, It should have internet provider in your place.
Good luck!

Jul 29, 2009 | D-Link DES-1008D 8-Port Ethernet Switch...

3 Answers

D-link cant accesed internet 4pc


Most of DSL modems are connected to PC with USB cable...
n if ur server is connected with other pc on lan .. you can use internet sharing option available in winxp.

Following are the steps to enable Internetsharing for other pcs.


How to use Internet Connection Sharing loadTOCNode(2, 'summary'); To use Internet Connection Sharing to share your Internet connection, the host computer must have one network adapter that is configured to connect to the internal network, and one network adapter or modem that is configured to connect to the Internet.

On the host computer loadTOCNode(3, 'summary'); On the host computer, follow these steps to share the Internet connection:
  1. Log on to the host computer as Administrator or as Owner.
  2. Click Start, and then click Control Panel.
  3. Click Network and Internet Connections.
  4. Click Network Connections.
  5. Right-click the connection that you use to connect to the Internet. For example, if you connect to the Internet by using a modem, right-click the connection that you want under Dial-up.
  6. Click Properties.
  7. Click the Advanced tab.
  8. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection check box.
  9. If you are sharing a dial-up Internet connection, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.
  10. Click OK. You receive the following message: When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP
    address 192.168.0.1. Your computer may lose connectivity with other computers on
    your network. If these other computers have static IP addresses, it is a good idea to set them
    to obtain their IP addresses automatically. Are you sure you want to enable Internet
    Connection Sharing?
  11. Click Yes.
The connection to the Internet is shared to other computers on the local area network (LAN). The network adapter that is connected to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0

let me know if it helps.

best regards,



Nov 03, 2008 | D-Link DGS-1008D 8-Port Gigabit Ethernet...

3 Answers

Connecting campus wide networking to hub


Hi,

Check the following:

Hardware First: Is Vista confirming LAN connection onn that PC, or is it showing disconnected cable?

Is the connection properties showing at least 100Mbps?
Are the RJ45 terminals okay?
Is the driver for the network card recognized by Vista and loaded?

If that is fine, then check the following in the network properties:

1. The IP address you are using
2. The gateway address: it must be the same as the gateway address in the other PCs accessing internet. Run and check
3. The Subnet mask. Use 255.255.255.0
4. HAve you Setup the Nework using the Setup Wizard, including Access INTERNET THROUGH A HUB THROUGH ANOTHER COMPUTER ON MY NETWORK?

Check those things and let us know. Ask for help from your network administrator about correct IP addresses on that LAN

Feb 26, 2008 | Compex MicroHub TP1008C Networking Hub

3 Answers

Home networking


You need to go to control panel>network set up wizard on the pc which has the internet connection and when you go through the wizard amongst prompts select, allow other computers to connect through this computer and then finish off the wizard. On the other computer you do the same but, on this one select this computer connects via another computer on the network and again finish off the wizard.

Oct 02, 2007 | Acer ALW 3016 Networking Switch

Not finding what you are looking for?
Compex MicroHub TP1008C Networking Hub Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compex Computers & Internet Experts

Sandeep Kamat
Sandeep Kamat

Level 2 Expert

58 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

davidjharper

Level 2 Expert

101 Answers

Are you a Compex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...