Question about Powercom Computers & Internet

2 Answers

My powercom UPS model no. is IND601A.It shuts down on its own with beep going off.the device doesn't function at the first attempt but it takes 4-5 attempts to get started.I mean to say when press start button it starts with long beep for few seconds & gets switched off after along beep automatically.Can u plz specify company's warranty period for this model.Is their any authorised person in kandivali,mumbai, maharashtra,india area who can repair it

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My powercom UPS model no. is IND601A.It shuts down on its own with beep going off.the device doesn't function at the first attempt but it takes 4-5 attempts to get started.I mean to say when press start button it starts with long beep for few seconds & gets switched off after along beep automatically.Can u plz specify company's warranty period for this model.Is their any authorised person in kandivali,mumbai, maharashtra,india area who can repair it

Posted on Nov 18, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 17,129 Answers

Please open and check your battery. possible that it has gone weak. Put the set on and do not switch off as the batttery needs the trickle charge to keep fit.
This is do-it -yourself site and we do not recommend any company.'But check for a search for Powercom Power supplies.. Might help.

Posted on Sep 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Beep beep and shutdown ups


most probably check on your bateries.

Aug 13, 2013 | Powercom (BNT-1500AP) UPS System

2 Answers

Ups starts beeping


Is there any indicator lights ON showing the fault condition?
This could indicate that the battery has a low charge. Even if you switch off the mains supply and it switches over to the battery, the UPS may shut down after a short time as the battery power (charge) runs out.
If the battery is more than 3 years old then it may be due for replacement.

May 10, 2010 | Powercom BNT-1000AP (dspcmbnt1000ap) UPS...

2 Answers

My ups shuts down after ac power goes off


1. Open the UPS housing using a screwdriver.
2. Check the fuse. If is busted, have it replaced.
3. If the fuse is alright, check the battery terminal
for the stored voltage. It must be at least + or -
10% of the rated voltage of the battery. The rated
voltage is located at the battery. (12 volts). If the
voltage is below, 8 volts or only 30% of the rated
voltage. It must be replaced.
4. If the battery

Sep 25, 2009 | Powercom (BNT-1500AP) UPS System

2 Answers

Ups after 1 hr automatic disconnected and on only battery mode.


I have to believe that the problem is in the smart chip, with the software that monitors the power. There is a very good chance that you have a slightly higher input voltage then normal. You may have to contact Powercom.....

I don't think you are in the USA...I sell Powercom and I don't recognize the part number. I think this is simular to the IMD 625 Va UPS sold here in the USA. The imperial model had a defect on the smart chip two years ago here in the USA, and I figured it out for the MFG, so maybe that same chip is acting up for you. Besides, the 600VA size should be too small for you know. You should upgrade to a 1000VA. It will handle the load much better.

Aug 26, 2009 | Powercom Computers & Internet

1 Answer

My Powercom UPS overload


remove all loads, unplug it, turn it off, wait 1 minute, plug it in, turn it on, apply loads. if this does not solve the problem, replace it.

Jun 08, 2009 | Computers & Internet

2 Answers

UPS shuts down when the mains is off.


Hi

After 3 years, i would by a new UPS...

The battery will have to be changed if you want to keep the old one.

What i've seen mostly here in south africa. When the battery life has ended they customer opens the ups and takes out the battery and then connects a car battery to the terminals. The then close the ups and let the car battery stand outside the ups.

Hope this info helps...

Apr 26, 2009 | Powercom BNT-600AP (bnt600ap) UPS System

2 Answers

UPS Turns ON and OFF by Itself.


You may need to change the battery within the battery backup. The normal lifetime of a battery is roughly 3 years.

Jan 28, 2008 | Powercom BNT-600AP (bnt600ap) UPS System

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Powercom Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Powercom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...