Question about Connex 3300 240-Channels Base CB Radio

1 Answer

General Lee has no audio output.

I've been using this radio everyday for about a year. I had it in the factory overhead slot in my truck. A few months ago it lost power. turned out to be a loose solder joint on the board caused by the power plug being pulled at an extreme angle inside the compartment. Had that fixed radio worked great......for a month! Then I noticed I there was no sound coming out of the ext. speaker. The meter is still moving when someone talks and people can hear me, so I've got TX and RX but no audio. I figured it was the ext. speaker. unplugged that and still nothing. a co-worker of mine tinkers with CBs so I had him check it out. Now Several months later, he replaced something and said that everyone he talked to about it, every manual he could find said that was the problem. he appologized and is bringing my radio to me because it still doesn't work.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 27 Answers

Your CB lives in a hostile enviorment ...try a full resolder on every joint...the problem can be many tiny , unseen crack in a board track ,transistor / IC failure..dry joint, faulty resistor, possiable cap failure, but that is not often in ceramic ,but in the electros (dried out electrolite) i replace low value uF caps as a matter of course. In a case such as yours you need bench test equipment to repair a faulty set, it is not often that a repair is done at home but you were right to give it to you friend.....let us hope he has not moved the positions of any trimpots or tuning slugs

Posted on Jun 29, 2008

  • ve3tei Mar 23, 2011

    Replace speaker jack



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

General lee cb gets hot and stops transmitting and receiving.

Connex general lee - Mauldroppers CB Radio Forum > Citizens Band Radio > Mobile DiscussionOct 23, 2012 - 13 posts - ‎7 authors Thread: Connex general lee ... amps and is getting cookin' hot when key'd for as little as 30 seconds, lol, truckstop hack job comes to mind lol.

Oct 02, 2015 | Radio Communications

1 Answer

Which way do I turn the modulation pot in my general lee radio?

be sure its the rite one,watch the meter on ur radio for forward movement.(most likely to the right)note;turning left /notice no audio turn to the right will result in audio!

Jan 25, 2015 | Radio Communications

1 Answer

Have a general lee transmittes.canhear myself talking but cant hear any response,changed mic,antan,coaix,still no change,need help

See if you can connect an external speaker and see if you get received audio. You might also see if you can connect directly to the audio output on the main board directly to see if there is detected audio.

Sep 29, 2014 | Radio Communications

2 Answers

What causes lo audio on general lee cb radio

could be not enough power going to the main pll and the final.Could be you are listening to a station thats far away and you have to really get close to hear what they are saying.

Aug 08, 2014 | Radio Communications

2 Answers

Wanting to know how to peak and tune my general lee hp cb radio

if you don't know how don't do it .If you turn the wrong pot you could kiss that radio goodbye.Find a tech and let them do it.

Nov 24, 2013 | Cobra Radio Communications

1 Answer

General lee no rx audio and low receive

audio chip or output transistor fried

Oct 04, 2013 | Radio Communications

1 Answer

I have a jvc kd-r311 radio in my car which has been working for about a year now, but a few days ago it came up saying "protect" on the front and now doesn't work, I've tried pushing the...

If you have a multimeter, try checking the speakers and speaker wires for shorts and/or grounds. Make sure your speaker wire has no bares spots. If the speakers and speaker wires all check out good, you may have a bad internal output ic.


1 Answer

Turned truck on the radio has power but there's no sound at all. Checked the settings and volume still nothing.

Without more information, such as year/make/model, my answer will be as general as your question. You may have a factory amp that needs to be powered up. Check your fuses for one labeled audio, amplifier and/or radio.

Mar 10, 2011 | Car Audio & Video

Not finding what you are looking for?
Connex 3300 240-Channels Base CB Radio Logo

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Connex Radio Communications Experts


Level 3 Expert

3289 Answers

Brad Brown

Level 3 Expert

17164 Answers


Level 2 Expert

247 Answers

Are you a Connex Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides