Question about Computers & Internet

1 Answer

I have dvd fab Platinum 4 have upgraded to dvd Platlum 5 got new key pasted entry in the space required it states will be reg but has not happened removed old version still will not reg thank you Thomas Sweeney ( suibhne12@eircom.net)

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 268 Answers

Hi,

Completely remove the traces of DVDFAB from your computer.

Clean Uninstall of DVDFab Platinum or Gold on Vista

1.) Uninstall DVDFab Platinum or Gold like you normally do.

2.) Click on Start open the your folder located on the top right side of the start menu.

3.) Open "Document" and delete both the "DVDFAB" folder and the "PCSETUP" folder now close the Document folder.

4.) On the on the menu bar click on "Organize" and scroll down and select "Folder and Search Options"and click on the "View" tab now scroll down and put a tick in the small circle next to "Show hidden files and folders" and click "Apply" then "OK".

5.) Now open the once hidden folder called "AppData" then open the "Roaming" folder and delete the "PCOUFFIN"...(Note)...there are 4 entries so delete all 4 and delete the "VSO" folder now exit the Roaming folder then the AppData folder.

6.) On the on the menu bar click on "Organize" and scroll down and select "Folder and Search Options"and click on the "View" tab now scroll down and put a tick in the small circle next to "Hide files and folders" and click "Apply" then "OK".

7.) Exit your folder and open the C: drive and click on Windows folder and click on "Prefetch"...(Note)...You will get a message stating "You do not currently have permission to access this folder" click the continue button and you will get another pop up message from "User Account Control" click the continue button now scroll down and delete the entry foe DVDFab will look something like "DVDFABPLATINUM.EXE-########.pf ( # ) are letters and numbers 8 in all.

8.) Now exit all windows and you are done.

Fox XP :

Check this :

http://club.cdfreaks.com/1711788-post1.html

Check the DMA.

http://forum.digital-digest.com/showthread.php?t=61905

Now restart the system for two times.

Install the new version of DVD FAB Platinum.

Hope this helps.

Good Luck.

Live, Love, Laugh.

Posted on May 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Magnasonic DVD model DVD836-2, code is required to use control. URC was ourchased no help.


Check this code search method. If you wish to know more about codes and setup proceedings to different other brands remote control, check this linkDirect Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

.

Feb 01, 2013 | Televison & Video

2 Answers

Registration key for dvd fab 8.1.5.9


Download link http://downloadity.net/04lm84 for DVDFab Platinum 9.1.3.8 incl Crack by DAZ.
With this Activation file you will get full and registered DVDFab 9 latest version. All instructions are in the file, also in video DVDFab Platinum 9 1 3 8 Crack and Registration Key by DAZ 2014

Jan 23, 2012 | Computers & Internet

1 Answer

How to upgrade new songs to my Platinum BMB-ONE HDD/DVD player


How to update songs (Hard Disk Model):
Method 1 - Single Volume Update Only
This method will require a Flash Drive.
Song Update data and Certification Key data will be written in the Flash Drive.
You can bring home the Flash Drive and be able to update the Platinum karaoke player by your own easily.
a. Bring a working Flash Drive to a Platinum Karaoke branch near to you and surrender it to our sales representative. Be sure to get a receipt. Your flash drive free space should be atleast 1 GB.
b. Our sales representative will then send your USB Flash Drive to our Head Office for processing
c. The process will take about 5-7 working days
d. Once you get your Flash Drive, ask for instruction on how to use the Updater
Method 2 - Multiple Volume Update
This method will require a USB Flash Drive and Hard Disk Drive in your Platinum Karaoke player.
Hard Drive will be re-formatted and be written with Fresh Updated data.
Certification Key will be written in the USB Flash Drive.
You bring home the Hard Disk Drive and Flash Drive, re-install the Hard Disk Drive in your Platinum Karaoke unit, and insert the Flash Drive to run Certification process.
a. Carefully disassemble Hard Disk Drive from the Platinum karaoke unit.
b. Bring the Hard Disk Drive and 1 USB Flash Drive (at least 1 GB of free space) to our sales representative nearest you (See List of Branches here)
c. Our sales representative will then send your Hard Disk Drive and Flash Drive to our Head Office for processing
d. The process will take about 5-7 working days
e. Once you get your Hard Disk Drive and Flash Drive, ask for instruction on how to finalize the Update process
How to Install the Update:
a. Make sure that the unit is switched off.
b. Attach the Flash Drive/Hard Disk/SD Card into the unit. For X2 model please note that MicroSD is not applicable for update.
c. Switch the unit ON.
d. Update will automatically run. Wait for the unit to automatically shut down.
e. Remove the Flash Drive/Hard Disk/SD Card. Switch the unit ON.
f. Update is Complete.
How to update songs (DVD Model):
a. Directly purchase DVD (comes with additional song list) from a Platinum Karaoke branch near you.
b. Play the DVD and enjoy your newly updated songs!

Nov 09, 2010 | CP Technologies USB HDD Platinum Series...

1 Answer

Unable to locate my DVD/CD-ROM Drive in my computer


These are the steps to resolve the issue for the cd/dvd icon missing in the My computer.<br /> Download the fix patch form the below URL:<br /> <a href="http://support.microsoft.com/?scid=aw;en-us;314060&amp;eula=1">http://support.microsoft.com/?scid=aw;en-us;314060&amp;eula=1</a><br /> Please make sure you copy and paste the complete link in the address bar of a new Internet explorer window.<br /> If the issue still persists perform the steps in the sequence from here.<br /> Please uninstall the CD/DVD drive form Device Manager :<br /> 1. Click Start and select Control Panel. <br /> 2. Double-click the system icon. If the System icon is not found directly under Control Panel, click the Performance and Maintenance icon and then click the System icon.<br />3. The System properties Window opens. You can open the System Properties window directly by pressing the Windows key and Pause/Break key simultaneously. <br />4. Click the Hardware tab and then click the Device Manager button.<br />5. Click the plus (+) sign next to the DVD/CD-ROM drives .<br />6. Right-click the driver listed under this Category and select Uninstall. In the Confirm Device Removal dialog box, click OK.<br />7. Repeat step 6 until all entries under the device category are deleted.<br />8. Restart the computer. <br /> After the notebook is restarted it automatically detects the drive and the drivers are installed.<br /> If the issue still persists please download again the fix patch form the below URL:<br /> <a href="http://support.microsoft.com/?scid=aw;en-us;314060&amp;eula=1">http://support.microsoft.com/?scid=aw;en-us;314060&amp;eula=1</a><br /> Please make sure you copy and paste the complete link in the address bar of a new Internet explorer window.<br /> If the issue still persists please perform manual registry set up by following the below steps:<br /> <br />Please make a full backup of your registry files, particularly user.dat, system.dat, and policy.pol. If you make any incorrect entries, the backed-up registry files can be used to replace the corrupted registry entries. <br /> Follow these steps to backup registry:<br /> 1. Click Start, select Run. In the "Open" field type REGEDIT <br />2. Click OK and click "File" in the menu bar <br />3. Click "Export" from the drop down menu this will open a new box <br />4. Click the down arrow beside "Save In" and select "Local Disk (C:)" <br />5. In the File Name field type BACKUP.REG Verify that under the "Export Range", that the radio button is beside "All" <br />6. Click Save<br /> Now make the following changes in registry:<br /> 1. Click plus sign next to HKEY_LOCAL_MACHINE<br />2. Click plus sign next to System <br />3. Click plus sign next to CurrentControlSet<br />4. Click plus sign next to Control <br />5. Click plus sign next to Class <br />6. In the left hand window pane click {4D36E967-E325-11CE-BFC1-08002BE10318} to select that key <br />7. In the right hand window pane select the UpperFilters registry key and press the delete key on the keyboard Confirm with an OK <br />8. In the right hand window pane select the LowerFilters registry key and press the delete key on the keyboard Confirm with an OK <br />9. Click on the "X" in the upper right hand corner of the Registry Editor window to close it <br /> <br />You can refer the following web site for more information:<br /> <a href="http://support.microsoft.com/kb/314060/">http://support.microsoft.com/kb/314060/</a><br /> Please make sure you copy and paste the complete link in the address bar of a new Internet explorer window.<br /> <br />This should solve the problem with CD-ROM drive.

Aug 28, 2010 | HP Pavilion DV9910US Notebook

1 Answer

Charged battery on car and keyed in radio code but then what do you do as nothing happened. The car is a P reg. ford escort estate


The FORD code entry instructions are 

Ford Code Entry Instructions

Once the unit has been turned on the display will show ' CODE - - - -'

Press preset [ 1 ] repeatedly for the first digit
Press preset [ 2 ] repeatedly for the second digit 
Press preset [ 3 ] repeatedly for the third digit
Press preset [ 4 ] repeatedly for the third digit
 
To save the code press the [ 5 ] key to accept. 

The set should now operate
============================================
If you require your code to be checked then the radio will have to be removed from the car in order to find the SERIAL NUMBER, usually found on a label on the casing....and it should begin with M****** or V or L or C
Then POST A NEW QUESTION 

quoting this Serial Number and your code will be calculated for you.

==============================================

Here is a video showing how to remove your radio from the dashboard. A pair of extractors are required (available from Ebay , Halfords ) but these can be made from 2 pieces of bent, wire coat-hanger or 4 small drills(using the blunt end) or 4 small Allen Keys or 4 small screwdrivers or 4 nails or even 4 darts.

An assistant is useful to pull the radio out whilst you are releasing the 4 securing clips
 
http://www.fitaudio.com/videos/din_keys_guide/video_din_size.html

Sep 26, 2009 | Car Audio & Video

1 Answer

Profiling requires 4mb free space; reformat required


1. Disconnect the player.

2. Download the new driver from http://support.rcaaudiovideo.com/

3. Install the software on your computer, then run it.

4. Reset your player by either pressing the reset button or removing the AA-battery from the player.

5. While holding down the "Play" key on your player, connect it to the PC via the USB cable. Release the "Play" key when you see the progress bar moving and "initializing" text. If you cannot see the "initializing" text, please disconnect your player and try again.

6. Click the "Start" button to upgrade your player

Jun 02, 2009 | RCA JET S2002 MP3 Player

1 Answer

DVDXCopy Platinum


cuse that company out of bussnes buddie use dvd fab platauim i have full verison for 30 if u need it

Oct 07, 2008 | 321studios DVD X Copy Platinum (200000)...

1 Answer

DVD region code lock unlocking on PS3


this is for people who really wants to watch there dvd movies no matter what region it is on a pal ps3 all you have to do is burn it onto a dvd-r and make that dvd region free, below are instructions on how to do that

ok i'm not sure if this will work on an NTSC ps3 console.

software required
dvd decrypter
dvd regionfree
dvd fab platinum 5 (you can use this software with the dvd region free without the dvd decrypter program but i don't do it this way, i like to do it the long way)

instructions
1. after installing all software load dvd region free and dvd decrypter
2. extract the entire movie into a seperate folder
3. run dvd fab plat 5 select movie folder and away you go

alternatively just install dvd region free and dvd fab plat 5 and do it all in one go with this software i've never done it this way before because i think it may not take out the region code doing this method but again i'ved never tried and it is alot faster

note: these software is very basic to use so i didn't go step by step on how to do what you want it to do

this i've tried this and tested and it works, i recommend doing it this way, it will benefit you, because then it will become a backup of the original copy incase something happens to it, and then you can't even play it anymore.

hope this helps everyone

Jul 19, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

Dvd x rescue


is # s out of date company out of busnness i have dvd fab platuim i can sell ya for 10

Jan 09, 2008 | 321studios DVD X Copy Platinum (200000)...

1 Answer

How do I burn files already on my hard drive?


get dvd fab platuoim thats x copy out f busnsses nomore updates so use dvd fab 30 days then buy that best tey make

Jan 01, 2008 | 321studios DVD X Copy Platinum (200000)...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

2,462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...