An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: watching a recording DVDR3575H/37
This just started happening I assume, then you first can try unplugging it for 5-10 min to reset it. If that doesn't work, please let me know as you may have some type of software or even hardware issue.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
For problems with timed recording, make sure the clock is correctly set. If power goes out for more than 30 seconds, the clock will be incorrect and the timer information will be off. Insert a blank tape (or one you want to record over). Then press Menu and then go to Timer Programming. (Use the up/down arrows and then hit the right arrow button.) Set the frequency of recording followed by the day and start time of the programmed recording. Then set the end time of the recording. Next set the channel number. (with some set top boxes and TV connections, choose 3 or 4 depending on the way the setting of the RF output. Then set the channel on the set top box and leave the box on.) Then set the recording speed. Press T-set to lock in the program. If you want to watch a tape before the program starts, press T-set (turning off the timer light). Remember to press T-set afterwards to resume programmed recording. You can't record to DVDs.
You probably have the auto clock turned on and it's finding the wrong channel to set itself with. You can turn that feature of then it will loose or gain time according to how accurate your individual time chip is. Also that unit only gets the time signal from analog stations and if your in the USA those were shut down the 24th of June, if your on cable they MIGHT still be working as most still carry some networks on a small analog basic section. Try this place and thread, more then you want to know about that machine. http://www.avsforum.com/avs-vb/showthread.php?t=940657