Question about Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Atlantis -won't spin

This machine washes fine--but at spin cycle just stops with a tub full of water. It was possible to manually set the dial to spin and it did for a while. However, now even that does not work. Last nite I had to turn the dial to the spin cycle that preceeds the rinse cycle.

Posted by on

  • jalantis2002 May 12, 2008

    guess we are in the same boat washes fine but will not spinn

  • Anonymous May 14, 2008

    I felt like the belt was loose, so I cleaned all the parts around the motor. Now I'm having trouble getting the teflon parts to stay tight to keep tension on the belt.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers

Find out where your filter is & clean it out thoroughly, refit.

Posted on May 10, 2008

  • prem mathew Jan 09, 2014

    The mechanical timer has a very small motor attached to it. In most cases it is this small motor which is 'shot'. It could save you a pile if you just check this out and replace it. Easily available at spares, thru the net

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a maytag Atlantis washer - 7 years old, it


I have a Maytag Atlantis top load washer which leaks in the rear right hand corner under the discharge hose, how do I take the machine apart to get to the problem.

Feb 04, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Water not filling in tub washer spins,


It sounds as if the timer has failed internally. Spinning on each setting means the motor is not reversing and that reverse function is controlled by the timer itself. It would never fill if it is stuck in spin unless you select rinse and depending on cycle it can inject water in the spin during the final rinse. If your machine does this normally see if it injects water. If it does inject water at that point I am 95 % sure your timer is the problem.

Jan 11, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Atlantis MAV6250AWW won't rinse or spin?


clean motor rollers(belt may be slipping)






















9vopy...paste)

Aug 31, 2009 | Maytag Atlantis MAV7260B Top Load Washer

1 Answer

Wash doesn't go through full cycle


I have a Maytag model A490 clothes washer. It works fine up to the rinse cycle and then shuts down. When it reaches this point it has become necessary to manually advance the dial a short ways whereupon it will fill with water and complete the rinse and spin cycles. This happens on both the regular and the permanent press cycles. What needs to be done to fix this problem?

Jul 14, 2009 | Maytag Washing Machines

1 Answer

Maytag top loader washing machine


i believe i can help you,,but washers dont agitate in the spin cycle,,i believe you ment it wont wring or spin in the spin cycle..your lid switch is defective,,replace,,if need be i can talk you though,,onthejob

Dec 28, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Washing machine fills, but won't agitate


Lid switch if its a Maytag Alantis... You said you have a GE top load in the start of your problem and ended witha maytag?

Dec 18, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Atlantis washing machine


Yes there is a small motor just like in most wall clocks the gears strip or the gear bushing slips and refuses to advance the dial.
you have to replace the whole timer unless you know MacGyver microsurgery

Feb 13, 2008 | Maytag Atlantis MAV9750A Top Load Washer

1 Answer

My maytag atlantis mav6200 only spins on whites cycle


Try running the machine in another cycle the very next time you use it. I'm trying to determine if this is machine fault something else.

If you just used the machine wait for about 1/2 hour before starting it again.

Jan 14, 2008 | Maytag Atlantis MAV6451 Top Load Washer

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

Related Topics:

491 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...