Question about Veo Connect Webcam

1 Answer

I'm on SKYPE and my light is green but my contact can't see me. I have tested the webcam setting and it's just black. I can hear my contact but no video feed.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

See section A. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have their computer setup properly.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud

Posted on Sep 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Green screen while using skype


Welcome to FixYa,
Dear User,
Please look at Skype / Tools / Options / Video Settings / Webcam Settings, and see if there is a box for "Low Light Boost". If there is, and it is checked, un-check it and try your video call again....
Still Same Uninstall Cam Driver
Download Driver From Here[select your OS and Download]
Install Driver
Still Same Let me Know Which is your Skype Version...?
Thanks for Contacting FixYA...

Jul 04, 2010 | Logitech Webcam

1 Answer

I have a logitech webcam it is a skype everthing works fine except i cannot hear the other person that i am on with my speakers are fine they can hear me but i cannot hear them what could be the problem?


If the problem is with just one contact its probably his mic setting at fault
Both check your set-up
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

May 02, 2010 | Logitech Quickcam Chat Webcam

1 Answer

My microphone doesn't work. I purchased the livecam so I could use skype. When I use skype, I can hear them, they can't hear me.


TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO SKYPE
CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Mar 23, 2010 | Microsoft LifeCam VX-1000 Webcam

1 Answer

I can see and hear but they can only hear me on skype...they have a hp


Before you can use your webcam in any chat program you have to configure it to that program

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

working OK ?

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Feb 19, 2010 | Logitech Quickcam Chat Webcam

1 Answer

We have a logitech camera and skype. We can see ourselves in the test. We can see and hear one of our contacts. They can't see us, but they can see us. Our other contact can see and hear us, but we can't...


Go into the skype setup and access the webcam from there and test setup sound / picture etc.

Ensure you tick a box that says "Show video as soon as connection is made" or similar.

Jan 13, 2010 | Logitech Quickcam Chat Webcam

2 Answers

I have a toshiba Laptop, and I have skype and oovoo downloaded on my computer, I want to know my Microsoft NX-3000 webcam, will not work! I just bought it today, this is the second webcam I had problems...


Sounds like the settings in the skype are wrong, you need to go into the tools - settings or properties. test the video there make sure you see yourself there, if you don't see yourself in the skype video settings page then its not working, also go to the sound settings, make sure the green bar moves when you speak, if it does not move the settings are wrong, you need to select the right microphone from the available on ths list there on the audio settings page in skype.

Jan 03, 2010 | Microsoft LifeCam NX-3000 Personal Web...

1 Answer

Have purchased a Microsoft VX-6000 webcam and have downloaded and installed software. Having trouble with viewing through Skype. I can see and hear other person, they can hear but not see me.


Before you can use your webcam in any chat program you have to configure it to that program

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/
If the webcam broadcasts your software is OK

Start Skype.
On the Tools menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Set your speakers as default.
Select your webcam as the default microphone.
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
Select your webcam as the default.
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Dec 18, 2009 | Microsoft LifeCam VX-6000 Webcam

2 Answers

Mikomi dc-7120 webcam on Skype


Problem solved:
by shutting down all other programs including the webcam itself, this enabled the webcam to be accessed by Skype and all worked fine!

Jun 17, 2009 | Computers & Internet

1 Answer

Skype does not recognise my webcam


YOU NEED TO SET UP CAM WITH SKYPE
IF STILL DOES'NT WORK THEN UNINSTALL SKYPE RESTAR AND REINSTALL THEN GO THROUGH CAM SET UP----

Go to TOOLS, then OPTIONS, and click on
Audio Settings
and set the Microphone and Speakers
to the computer Audio Card.
Then click on the Video Settings.
The camera if installed properly
will come up and show a picture.
Then on the bottom of the page click on Save.

PLEASE LET ME KNOW IF YOU STILL HAVE A PROB AND DON'T FORGET TO RATE

Feb 03, 2009 | Logitech Webcam

1 Answer

No sound


OK so you have skype loaded... we can use that to test your system

start skype,

Tools, options,audio settings

the top grah is the audio INTO your system. Check to see if the green bar changes with you speaking into the mic.

If not check the dropdown and select the lifecam if it is available, else try any other options there and test as above and post back results

BTW what is the connection speed of your internet?

Jul 02, 2008 | Microsoft LifeCam VX-1000 Webcam

Not finding what you are looking for?
Veo Connect Webcam Logo

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Veo Computers & Internet Experts

micky dee

Level 3 Expert

2716 Answers

Lyle Siemens
Lyle Siemens

Level 2 Expert

328 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you a Veo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...