Question about Sebo X4 Bagged Upright Vacuum

2 Answers

Cutting out when the vacuum is upright it is cutting out with what seems like close conection. any thoughts?

Posted by on

  • hollyhenry May 10, 2008

    sebo auto x4 extra

  • alison2907 Jul 14, 2008

    Hoover seems to lose power and cut out when in upright position, seems like there is a problem with the brushes, have checked the electris and seem ok

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 438 Answers

Greetings from Govacuum,

You may want to check the handle position. On the base of the handle there is a little tab (see picture below) that has open one side, closed on the other. If for some reason the handle is not completely down, this can cause the machine to cut on and off. Just unlock this tab, push the handle all the way down, and then close the tab again. Hopefully this should take care of it for you.
cutting out - d128cfb.jpg

If you have any other questions about the Sebo, I love sharing my knowledge, and passion for fixing and repairing vacuums, please don't hesitate to send me an email.

Posted on Oct 03, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Wow that worked for me

Posted on Nov 29, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cutting out during use


that means you have blockage in one of the pipes normally the one under the vac were the brush-bar is

Jan 25, 2013 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

DC15 Brushbar Problem. Intermittant operation of brushbar. Cuts out depending on angle of vacuum. Also cuts out on lifting from floor. Normal suction at all points and no blockage. Brushbar not...


DC15 Brushbar Problem. Intermittant operation of brushbar. Cuts out depending on angle of vacuum. Also cuts out on lifting from floor. Normal suction at all points and no blockage. Brushbar not jammed. Seems like a loose connection somewhere but where ? and what

Jun 29, 2011 | Dyson DC15 All Floors - The Ball Bagless...

1 Answer

I have a new Dyson upright vacuum. The vacuum will not stay on. I used it a couple of hours ago with no problem, but now it won't stay on. It seems to be sucking and running normally otherwise. What...


Hi Donna, My name is Don.

When you say it wont stay on could you please advise the following:

1. Does it cut out suddenly as you are using it?
2. How long can you use it before it cuts out?

Oct 27, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

I cut all of the hair out of the bottom of the spin-brush on the Dyson Upright Animal Vacuum. Now I dont think I can get the brush back in there correctly. If I squeeze it in there (which it is a VERY...


Check the roller ends for dirt build up, they pull off and you should be able to clean them out. The roller should just go back into place if pushed together.

Oct 04, 2010 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

Dyson DC07 keeps cutting out and smells of


does it smell like an electrical burning smell? sounds like your motor has went bad.

Mar 06, 2010 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

The vacuum cleaner does not pick up anything from carpet. It does not even pick up pieces of thread laying on carpet. On tile floors it blows dirt away instead of picking it up. I've tried all the settings...


Sounds like there is a clog..

Usually its in the hose - look closely.. Stretch the hose out straight and look in there good..

Or a clog could be in the vac close to where the hose conects to the vac on either end..

This is most case scenario with these types of vacs..

I hope this helps !!
Please rate me good ;o)

Jul 10, 2009 | Hoover U5269910 Bagless Upright Vacuum

1 Answer

Vacuum doesn't vaccum!


Sounds like there is a clog near where the hose conects to the lower brush part.. Try to look up in there.. Under the brush there should be an opening that goes into the hose.. There might be a clog there..

Jul 08, 2009 | Bissell Upright Vacuum - The Pet Hair...

1 Answer

Just stopped mid hoovering and now won't switch on!


It is probably a thermal cut-off which is caused by a blockage. The machine will turn itself off before it overheats if it is a thermal cut-off. Once it has cooled down, you will be able to turn it back on again (usually 30 mins - 1 hour).

If the machine doesn't turn on at all anymore, you may need to replace the power switch. Call the Dyson helpline, they will do a blockage troubleshoot and if it's not that, they will tell you where you can find an authorized Dyson repair dealer in your area.

Jul 07, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

2 Answers

G6 cutting out


Hi There, If it keeps cutting out when you move the handle it's usually the cable that has gone. Turn the machine on and waggle the cable if it cuts in and out then you can confirm it's the cable. Many Thanks Chris www.elidistribution.co.uk

Sep 14, 2007 | Kirby G6 Bagged Upright Vacuum

Not finding what you are looking for?
Sebo X4 Bagged Upright Vacuum Logo

Related Topics:

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sebo Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Sebo Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...