I need a power cord for a samsung video camera model scl906 where can i find one

Hi,
No electrical cord is used for this model cameras, you will get a clipping type universal battery charger or an original Samsung charger from the market.

Hi,

You can download and print the instruction manuals in PDF format by clicking these links:

SCL906

SCW61

Please note: Adobe PDF Reader is required to view this manual. Click here to download the latest version of Adobe Reader.

Hope this solves your problem. Thanks for using FixYa.

use this adapter: ADS Tech USBAV-192-EF Video Xpress USB 2.0 Video Capture to connect your camcorder to the pc and use included software to capture and edit your movies, then create a dvd or share on internet your new edited movie.

Here's a link to download the manual.

http://www.usersmanualguide.com/samsung/camcorder__8mm/scl906

Hope this helps. =)

Here is the URL for the replacement accessories for your camera.
http://www.samsungaccessory.com/search/search.asp?SearchWord=SAMSUNGL200

down load samsung software plug usb cable in to camera turn camera on then plug in to computer . follow directions on screen .

Strange, I have the opposite problem, I have the cord and camera, but no monitor. I found the following fix below to make this camera hook up to any tv or monitor, but it's greek to me. It may help you though! Or, if you can translate these instructions for me to hook up mine, I'l happily GIVE you my cord!

"The DC power was sent up the coax and the video is AC coupled and sent back down. If you open the
camera and trace the wire from the center pin of the UHF connector, it will lead to an inductor
and a large value capacitor. The video is coupled through the capacitor, which blocked the DC
power from the video output amp. The inductor (coil) blocks the video from getting back into the
power section.
Cut the inductor loose from the center wire of the connector. Put well filtered +12 VDC at 500
mA (1/2 amp) or greater into the inductor at this point while running a video cable from the jack
to a video monitor or to the video input of your home VCR. Then you can see the video on your TV.
Power return is to the ground of the connector or any other convenient grounding node.

I experienced the same thing. The compact power adapter is simply the power cord used also to recharge the camcorder. Plug it into the wall at the same time as you have the USB plugged into the computer and it should be able to download.

That is an analog video camera. It does not interface with a computer. You need a didgital camera or something that converts analog to digital

The cable that goes from the camcorder to the TV or VCR is a simple one to replace. It's got a standard 3.5mm stereo headphone jack at one end and RCA's at the other. So all you need is a cord that is designed to let you play an MP3 player through a home stereo, and Radio Shack sells these, as does Wal Mart. The only thing is that one cable will be red and one white, whereas the original had one yellow and one white. Just plug the red plug into the yellow video-in jack on your TV or VCR.