Question about Cyberhome CH-DVD 300 DVD Player

1 Answer

Codes to use dish network remote on cyberhome dvd player

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 123 Answers

Power scan instructions:

Step 1:
Press and hold the TV mode button until all mode button back lights illuminate,then release.

Step 2:
Press and release the Power button.

Step 3:
Press the Up button once a second while pointing the remote at the desiredequipment. If the code for the equipment comes up, the equipment will poweroff.

Step 4:
Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.

After doing the power scan please remember to put the remote back into SATmode. Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Posted on Feb 25, 2011

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: codes for myCyberHome DVD Player CH-DVD 402/S

I still have not found the correct codes. Sorry.

Posted on Jun 16, 2008

SOURCE: universal remote codes

some advice to anybody here might be to go to oneforall.com

Posted on Apr 27, 2008

  • 1 Answer

SOURCE: Need remote codes

I have DirecTV and I have the same remote and I read somewhere you can use the codes for Sampo. I found the codes in the DirecTV remote's manual. The first one I used worked. Hope this helps!

Posted on Jan 01, 2009

  • 1 Answer

SOURCE: remote control code number

20816, 20874, 21023, 21129

Posted on Apr 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We need the code to type in to control the power on our dish network remote.


Hi my nameis Mike Houston of DISH Network and I see you need the code for the Mintek DVDplayer. We currently do not have a code that goes to the DISH Network remote, wedo have what we call a Power Scan to program the DISH remote to the DVD player.I will send the link to help with these steps, http://www.dishnetwork.com/SupportSection/power-scan-instructions.

May 01, 2011 | Mintek DVD-2580 DVD Player

1 Answer

My remote broke and im trying to get the codes for it for my dish network remote. Do you know them ???


Sorry to hear about the original remote, we would be happy to help with getting your DISH remote programmed to your Curtis DVD player. Here is a list ofcodes that should address your DISH Network remote to your Curtis DVD player: 678, 679, 683, 585, 592, and 594. Start by pressing and holding the DVD/VCR button located on the top of the remote until allthe mode buttons at the top of the remote light up, then release. Use thenumber buttons to enter one of the codes for your Curtis DVD player, thenpress the pound (#) button. If the code entered is valid for the remote, the modelight flashes three times.To check that the code works try several different functions on the remote tomake sure it will properly operate your DVD player. Keep in mind that somecodes may not be compatible with your equipment. If this is the case, pleasetry the other codes listed for that device until you find one that iscompatible with your equipment. We hope this helps and thank you forbeing a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Sep 01, 2010 | Curtis DVD1047 DVD Player

1 Answer

Need code for my dvd so I can use dish network remote cyber home dvd


Power scan instructions:

Step 1:
Press and hold the DVD mode button until all mode button back lights illuminate,then release.

Step 2:
Press and release the Power button.

Step 3:
Press the Up button once a second while pointing the remote at the desiredequipment. If the code for the equipment comes up, the equipment will poweroff.

Step 4:
Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.

After doing the power scan please remember to put the remote back into SATmode. Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jul 15, 2010 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Dish network remote to run RCA DVD player


I had rca remote that did not recieve ir signals but rf signals instead. Check online with rca or in owners manual for what type of signal factory remote sends. The dvd player I had was 5 dvd and that was the case. Dish might have an option like direct tv where you can program rf signals as well. Call dish network support or look online

Apr 25, 2010 | DISH Network IR Remote Control

1 Answer

Need remote codes


I have DirecTV and I have the same remote and I read somewhere you can use the codes for Sampo. I found the codes in the DirecTV remote's manual. The first one I used worked. Hope this helps!

Dec 30, 2008 | Cyberhome CH-DVD 300 DVD Player

2 Answers

Universal Remote Control CODE


You would need to contact the company that makes the remote and maybe Cyberhome for the code.

Feb 17, 2008 | Cyberhome CH-DVD 300 DVD Player

2 Answers

Remote Codes


I found the code...

In the remote codes guide, the Cyberhome DVD player is listed under "Portable DVD"...the code is 2083...worked for me, enjoy.

Dec 28, 2007 | Cyberhome CH-DVD 300 DVD Player

5 Answers

Need remote codes


I have a CyberHome CH-DVD-300 unit with a Dishnet remote. The remote code that worked for me is 724.

Sep 24, 2007 | Cyberhome CH-DVD 300 DVD Player

Not finding what you are looking for?
Cyberhome CH-DVD 300 DVD Player Logo

520 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyberhome Televison & Video Experts

zappal

Level 2 Expert

76 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Cyberhome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...