Question about Fuji Pictrography 4500 Thermal Printer

2 Answers

Fuji Pictrography 4500 Thermal Printer

Sir i have two machine of fuji pictrography 400II & 4500N My Both machines are down having problem with J692 Paper jam I had refer to services Manuel still same problem

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 115 Answers

4500N can't be recognize with an Intel Mac, because the Apletalk doesn't work. My solution to print: I've got a powerPC as an interface between Imac intel and fuji network adapter. The pictro driver is installed on both machines. On The Intel, The Apletalk is connected on Airport. On the PowerPc, The Appletalk is connected on Ethernet. Ethernet cable between powerPC and pictro network adapter. SCSI2 cable between PNA and the 4500. WELL!! it works.

Posted on Dec 04, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just bought a used 4500N printer and can't get it to be recognized by my mac or pc...any ideas how I get an ip address for it?  Thanks

Posted on Nov 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transport


It better to tranport the Coppier in the carton it came with will all the foams. Althernatively srecure the doors and any other part the can move or open during transportation. Put good shock foam and it will be safe to transport the coppier

May 20, 2010 | Fuji Pictrography 4500 Thermal Printer

1 Answer

Does the Fugi Pictrography 4500 wont print


Buy distilled water from the grocery store for $1.00 and then clean out the water tank and refill to the fill line. Change the water filter every 6 months (according to the manual). Clean out the water hoses by ramming soapy chopsticks through them and then forcing some water through them.

Mar 06, 2009 | Fuji Pictrography 4500 Thermal Printer

2 Answers

Printer drivers fuji pictography 4500 mac 10.5.6


On the link below there are all drivers available for your printer, if you do not find MAc OS 10.5, then try 10.3x, if printer still does not work, then it is not compatible with this system.

See all 15 Download Drivers & Software for Pictrography 4500

Feb 03, 2009 | Fuji Pictrography 4500 Thermal Printer

2 Answers

Driver for pictography 4500 for MCOSX 10.4.8 FOR G3


I haven't done it yet, but Fuji shows a driver on their US site for 10,4 and the Epson driver for 10.4 is also on their support site- I can provide links, but thye are easy to find just digging down thru the web sites

Dec 29, 2008 | Fuji Pictrography 4500 Thermal Printer

1 Answer

ANy solution to the lack of fuji drivers for new macs and OS?


4500N can't be recognize with an Intel Mac, because the Appletalk doesn't work. My solution to print: I've got a powerPC as an interface between Imac intel and fuji network adapter. The pictro driver is installed on both machines. On The Intel, The Appletalk is connected on Airport. On the PowerPc, The Appletalk is connected on Ethernet. Ethernet cable between powerPC and pictro network adapter. SCSI2 cable between PNA and the 4500. Of course, auto calibrating + eye-one color calibrating. WELL!! it works.

Nov 13, 2008 | Fuji Pictrography 4500 Thermal Printer

1 Answer

Fuji Pictro Proof e252


E 252 doesn't seem to be listed in the troubleshooting guide. Are you sure of the number?

May 21, 2008 | Fuji Pictrography 4500 Thermal Printer

2 Answers

Do you have a service manual for the 4500N, I need one


Hello, try this: pull and open the refuse compartiment and look in the empty space. you will see the J9 trap. open it and look for any paper jam.

May 15, 2008 | Fuji Pictrography 4500 Thermal Printer

1 Answer

11x14 paper jam


I had the same problem and the fix was adjusting the peeling time. Once this was adjusted I haven't had any jams. Fuji Tech Support talked me through it over the phone. Unfortunately I didn't write down the procedure and can't remember how we did it to share with you but I think I had to go into a maintenance or service mode to do it. You could probably look in the Service Manual to see how to adjust the peeling time. My Service Manual says refers to section 2.5.4.

I hope this helps,

CT

Oct 25, 2007 | Fuji Pictrography 4500 Thermal Printer

Not finding what you are looking for?
Fuji Pictrography 4500 Thermal Printer Logo

Related Topics:

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Printers & Copiers Experts

isaac johny
isaac johny

Level 3 Expert

796 Answers

Prashant  Sharma
Prashant Sharma

Level 3 Expert

1127 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Fuji Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...