Question about Panasonic Televison & Video

1 Answer

I have a Panasonic TV, model pt-47wxc43g, and it won't turn on. All I get is the power light flashing three times, pausing, and then flashing three tims again, as if it's in a stand by mode. What's the reason for this?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Panasonic Master
  • 14,553 Answers

Three times means short protection, 98% of the time it means one of the resistors that protect the convergence chips is blown.

I can tell you exactly where to look and what for---if any of the 2.2 resistors are white in the middle and gone I also have start to finish instructions for this repair.

Make a comment here and I will assist you.

If this helped you rate this solution as I do this here for FREE.

SD TECH

Posted on Sep 01, 2010

  • jonlennon Oct 15, 2010

    Could you please forward everything i will need to make the repair to jonlennon1973@hotmail.com

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Red light flashing, tv wont turn on


need the model number of the panasonic and also how many times it is blinking. The blinking is an error code.

Aug 03, 2012 | Panasonic Televison & Video

1 Answer

I have a pt-47wxc43g panasonic projection tv and when i turn it on the red light blinks three times and it does not turn on.


Hi,
Three times red light blinking indicates problem of convergence output chips are bad, tv has 2 chips that need to be replaced.
Let me know if you are handy with electronics stuff repair and can replace/ solder parts in circuit board to provide you technical info OR local tv repairman will do this job for you.
Thanks.

Dec 27, 2010 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Replaced convergence chips, have new problem


Did you check the 2.2 ohm 2watt resistors? As often one or two will blow when the old ICs fail. The 3 blink error is indicating a problem with the convergence circuit still.

Jun 19, 2009 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Panasonic PT-53TW53G


If the front power light is blinking three times then your TV has a problem with the convergence. You can get the correct replacement parts and full step by step photo instructions from www.TvRepairKits.com

Aug 17, 2008 | Panasonic PT-53TW53 53" Rear Projection...

4 Answers

Panasonic TV not working


The Led should be blinking a certain number of blinks before pausing. IF so what is the number of blinks?

Mar 11, 2008 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

Panasonic PT -47WXC43G 42 inch TV


replace the convergence amp ICs both of them. They cost about 15.00 each

Mar 09, 2008 | Panasonic PT-53WX42 53" Rear Projection...

2 Answers

Panasonic PT-51HX43G no power, red light flashes


I have a Panasonic PT53TW53G projection tv that had the same problem for power .A terrific person gave us wonderful advice and it fixed our tv! We were told to replace the IC conversion amplifiers. On our model they are STK392-110 (your's may be different). We ordered the parts from www.electronix.com and they were only $12. for the two parts. We also had to purchase a soldering iron and de-soldering vac for removal/replacement of parts. Good Luck!

Feb 04, 2008 | Panasonic PT-53TW53 53" Rear Projection...

1 Answer

TV won't turn on


problem is fan stoppage this is probable caused by excessive
dust in fan take off back and locate visually the cooling fans in unit
use canned air to remove dust until fan moves freely. if all fans
are clean maybe one fan is not giving rotation detect signal
look at voltage on white or yellow wire from fan s/b 5v then 0v
when fan rotates if one stays at 5v replace it

Jan 07, 2008 | Panasonic PT-50DL54 50" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...