Question about GE SteelBEAM FluorescentLED Hybrid Lantern Black

Open Question

I have a G.E. green lantern model #17000. How do I replace the bulb?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the bulb of the 6V Eveready Lantern if bulb won't come out


Drop a couple of drops of WD 40 on the bulb retaining ring. Let site overnight and in the morning it will easily unscrew. Note: be sure you use only a couple of drops as you don't want to get it on the reflective lense

Sep 27, 2014 | Energizer Eveready Utility Lantern Uses 6V...

1 Answer

Swissgear rechargable lantern won't light up, even though the green led light indicates it is fully charged


There are several different models of the Swiss Gear rechargeable lantern. On most though, you can remove the top portion of the lantern and check the lighting element inside. In most cases the elements can be removed and replaced. I have a dual filament lantern and from experience I know that every so often you may have to go buy a replacement light piece. If the lantern has been bumped or even just strapped to the outside of the pack while walking, it's possible for those elements to become loose and need repositioning or replacement so do check that. I'm sure that it should be unlikely your charger is malfunctioning unless you left it plugged in for some very extended period of time, in which case I would say the light would be more likely to burn out. But definitely try that and if that doesn't work the battery pack on the lantern itself may have an issue in which case you can always get a replacement.

Aug 29, 2012 | Camping, Backpacking & Hiking

1 Answer

Tried to charge my Coleman Retro Lantern, the red light for charging is on but after 24hrs charging, I take the charger off and try to turn the lantern on, it wont work. How can I fix this...


I just bought a retro rechargeable sealed battery,recently. I charged it for 18 hours,the lights all worked,but I don't remember the green light comming on.i put the lantern away for 3 months or so.i decided to check the the battery light out first week of june, the light was there,then I said let me charge it up again, I never seen any green light come on showing it was fully charged. I took the battery out and checked the wires to see if there was a break. None that I could tell. After you take the battery out ,there is another section square that covers where the bulb is located,but I didn't touch that part yet. Stuck" on this one. Help"

Sep 15, 2011 | Coleman Retro Rechargeable Battery Powered...

1 Answer

How do I change the bulb of the 6V Eveready Lantern?


If it is the yellow floating lantern you have to remove the black plastic stub on the underside of the reflector using needlenose pliers to wiggle and slightly pull until it releases and the bulb will come out.

Jan 06, 2011 | Energizer Eveready Utility Lantern Uses 6V...

3 Answers

Coleman rechargable lantern Model 5327A750. Have not used it in a while have left it on charge for over 24 hours. the night light works but the main light does not go on. Replaced the bulb and still...


just read the charging instructions. Charge for 16-18 hours. If stored for more than 6 months recharge for the full 16 hours. Do not leave the lantern on after the battery has stopped, has overdischarging the battery can cause problems in recharging to a full charge. If this does happen, switch lantern to off and recharge for 40 hours.YES 40 hours. Only the LED is the only light to be used while charging. If you hane the other light on hi or low the battery does not charge.

Hope this helps

Oct 24, 2010 | Sport & Outdoor - Others

1 Answer

How do you relamp the GE model 17000 lantern


Visit the Coleman site to locate your particular lantern.
http://tinyurl.com/2a9j2xx

Jul 02, 2010 | Coleman Retro Rechargeable Battery Powered...

3 Answers

I have a GE Hurricane lantern model # 17000, how do I get it apart to put new batteries in it? There is an arrow on the bottom of it pointing to oppen one way and close the other, but nothing is budging.


I have the same latern. Apply a bit more force to rotate the bottom lid in a counter-clockwise direction. There are threads on the inside of the botton lid. To replace the battery or bulb you go through the botton of the lattern.

Jun 30, 2009 | Camping, Backpacking & Hiking

Not finding what you are looking for?
GE SteelBEAM FluorescentLED Hybrid Lantern  Black Logo

Related Topics:

1,698 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Camping, Backpacking & Hiking Experts

Tom Chichester

Level 3 Expert

42901 Answers

Brad Brown

Level 3 Expert

17093 Answers

ray gallant

Level 3 Expert

51132 Answers

Are you a GE Camping, Backpacking and Hiking Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...