Question about Computers & Internet

1 Answer

When i start my Computer after displaying Welcome Screen the Message appears " The Apllication failed to Initialise properly ( 0xc0000017). Click OK to terminate the Application". So Pls send to me a solution

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 180 Answers

Option 1.

Restart the computer in safe mode, and then remove Aventail Connect. To start Windows in safe mode, press F8 during startup, and then select the safe mode option from the extended boot menu.

Option 2.

Add the Svchost.exe executable file to the Aventail Connect exclusion list. The Svchost.exe file is stored in the %Systemroot%\System32 folder. For example, this file may be in the following location:
C:\Windows\System32

Posted on Sep 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I get the message "check


You need to make your new display active. You can do it by following proper instructions depending on the video adapter included with your notebook:

On models with the Intel Graphics Media Accelerator
1 Right-click on the desktop and select Personalize.
2 Click Display Settings.
3 Follow the on-screen instructions to change the settings.

On models with the NVIDIA or ATI video controller
1 Click Start and Control Panel.
2 Click Adjust screen resolution under Appearance and Personalization.
3 Right-click the number 2 monitor and select Attached.
4 Click OK.
At the confirmation prompt, click Yes.

May 02, 2011 | Samsung SyncMaster FX2490HD 24 inch...

1 Answer

Code Oxcooooo22


Even when I am using the administrator account I can not download updates
from the windows update site the yellow icon used to appear but no updates,
now no icon appears, these messages come up whenever I've tried to download
updates manually from the windows update site [Error number: 0x8DDD0002] or
something that goes like this OxOOOA46 and there is a link to where one gets
instructions on fixing it. I have done what was suggested which was to go to
tools internet explorer security and make sure user persistence user data was
enabled I've done all this to no avail. I've been told that I need to be an
administrator to download updates but anytime I've tried to download updates
I've been using an account with administrator privileges.

I've had problems accessing the internet for ages but it is only lately that
I can't download updates from the windows update site.

I keep getting these error messages when I switch on my computer using the
limited account. ccApap.exe - Application Error.
The application failed to initialise properly (OxcOOOOO22) click on ok to
terminate the application.

I click on ok and then another message comes up osCheck.exe - Application
Error
The application failed to initialise properly (OxcOOOOO22)click on ok to
terminate the program

Again I click on ok and another message comes up PIFSvc.exe - Application
Error
The application failed to initialise properly(OxcOOOOO22) Click on OK to
terminate the application.

I click on ok and windows loads as normal. I can access programs such as
works and windows media player but my anti virus (Norton Internet Security
2007) has disappeared but when I use the Administrator Account Norton seems
to be there and seems to work ok.

My computer is a year old and I have had to get it repaired a couple of
times but I don't want to spend any more on it as they can't seem to fix the
problem. I can do what I want so long as it is offline anything that
involves the internet I have problems with. The computer Operating System is
Windows xp Home Edition with service pack 2. I use Internet Explorer version
7.

Any ideas on why I have problems with the internet and what I can do to
solve them would be much appreciated.


None of those failing modules that you mention are from Microsoft.
I suspect that they may be from your security package(s).
Try enabling the Windows firewall only. Uninstall your other security packages
and then retry getting the updates.

BTW if you are only concerned with getting the updates but don't care how
you could also try using the Windows Update Catalog, download and install
manually from there.

Mar 21, 2011 | Computers & Internet

2 Answers

Need to restore computer


if you want restore your computer then just flow the step

1 start

2 all programs

3 accessories

4 systems tools

5 restore systems

after that folow the screen your will able to restore your systems

Apr 24, 2010 | E-Machines T3265 PC Desktop

1 Answer

When cp is bootin up, it goes to welcome screen an then is black screen, stays black except the mouse arrow is showin' it bwon't boot up no further,can sombody please help, Jack


Restart the Notebook and keep tapping the F8 key to access the Windows advanced options.

select Safemode.

Once you are in safemode, follow the below steps :

  1. Log on to Windows as Administrator.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts.
  3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next.
  4. On the Select a Restore Point page, click the most recent system restore point in the On this list, click a restore point list, and then click Next.

    Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
  5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
  6. Log on to the computer as Administrator. The System Restore Restoration Complete page is displayed.
  7. Click OK.

Mar 14, 2010 | Compaq Presario 700 470024-192 Notebook

1 Answer

My AR-5316 dont work in network with computer i am using. it shows that "required user intervention" when i am printing cadd drawing.. what should i do?


Before starting the installation, make sure the USB or parallel interface cable is not
connected to the MFP.

1
2
Insert the supplied CD-ROM into your CD-ROM drive.

Double-click "My Computer" (


), and then double-click the
CD-ROM (


) icon.
When any of "Hardware Found", or "Found New Hardware Wizard"
messages appear during the software installation, be sure to click the
"Cancel" button.

3
Double-click the "setup" (


) icon.
If the language selection screen appears after you double click the
"setup" icon, select the language you wish to use and click the "Next"
button. (Normally, the correct language is selected automatically.)

4
Select the software packages to be
installed, and then click the "Next"
button.

The software packages with checkmark (


)
on the list on the screen will be installed.
Click the "Display README" button to show
the information on the selected package.


In Windows 95/NT 4.0, "Button
Manager" does not appear. In
Windows 98/Me/2000, do not select
the "Button Manager" checkbox.
because this is not supported when
using the parallel interface.


5
The next screen appears. Make sure that the parallel interface
cable is not connected, and click "OK".

Windows 95/NT 4.0 Windows 98/Me/2000


6
Check the contents of the package on the screen, and then
click the "Start" button.

The software packages to be installed will be displayed on the screen. If
inappropriate packages are displayed, click the "Back" button to select only
appropriate software packages.

28


7
Copying files for MFP driver installation and parallel interface
setup (This step will start if it was selected in step 4).

After confirming the message in the "Welcome" window, click the

Aug 06, 2009 | Sharp AR-5320 Black and White Copier

1 Answer

Dell Inspiron blank screen


You can restore your system in your safe mode.
To use System Restore to restore Windows XP to a previous state, follow these steps:
  1. Log on to Windows as Administrator.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts.
  3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next.
  4. On the Select a Restore Point page, click the most recent system restore point in the On this list, click a restore point list, and then click Next.

    Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
  5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
  6. Log on to the computer as Administrator. The System Restore Restoration Complete page is displayed.
  7. Click OK.
If you successfully restored your computer to a previous state, and the computer is performing as it should be, you are finished.

Jun 11, 2009 | Dell Inspiron 9300 Notebook

2 Answers

Out of Range message displays when PC boots


The settings that you have for you tower needs to be changed if you have a old monitor connect that to the tower then right click on your screen go to settings and set it real low once this is done connect the new monitor up and set where you would like it,

The out of range is just letting you know that the settings thats set the monitor can see

Mar 12, 2009 | Westinghouse 22" Widescreen LCD Flat Panel...

1 Answer

Booting problem


If the computer was working properly few hours/days back... then you can try it by restoring the windows to an earlier time by booting it in the safe mode.


How to go in the safe mode < click



How to restore the system>

To use System Restore to restore Windows XP to a previous state, follow these steps:
  1. Log on to Windows as Administrator.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts.
  3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next.
  4. On the Select a Restore Point page, click the most recent system restore point in the On this list, click a restore point list, and then click Next.

    Note A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
  5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
  6. Log on to the computer as Administrator. The System Restore Restoration Complete page is displayed.
  7. Click OK.
If you successfully restored your computer to a previous state, and the computer is performing as it should be, you are finished.

If the restore process completed successfully but the computer is still not performing as you want then its recommended to repair the windows.


Dec 04, 2008 | Dell OptiPlex GX260 PC Desktop

1 Answer

Blue colour background saying it is the stop error screen.


The fix from Microsoft's website:
To resolve this problem, start your computer in Safe mode, remove the display adapter, rename the .inf files that are associated with the display adapter drivers, restart your computer in Normal mode, and then update your display adapter drivers. The following steps describe this procedure in more detail:
  1. Start Windows in Safe mode. To do so:
    1. Restart the computer, and then press F8 while the computer starts.
    2. On the Windows Advanced Options Menu that appears, use the ARROW keys to select Safe Mode, and then press ENTER.
    3. Use the ARROW keys to select the operating system to start, and then press ENTER to start Windows XP in Safe mode.
  2. In the message that states that Windows is running in Safe mode, click Yes.
  3. Click Start, click Run, type msinfo32 in the Open box, and then click OK.
  4. Under System Summary, expand Components, and then click Display.
  5. In the right pane, note the information that corresponds to the INF File item, for example, Nv4.inf, Oem0.inf, or Atim128.inf.
  6. Quit the System Information utility.
  7. Click Start, right-click My Computer, and then click Properties.
  8. Click the Hardware tab, and then click Device Manager.
  9. Expand Display adapters, right-click the display adapter, and then click Uninstall.
  10. Click OK.
  11. Click Start, click Run, type cmd, and then click OK.
  12. In the Command Prompt window, type the following commands, and then press ENTER after each line: ren %systemroot%\inf\INF file name from Step 5.inf *inf.old
    ren %systemroot%\inf\INF file name from Step 5.pnf *pnf.old
  13. Close all open windows, and then restart the computer in the typical manner.
  14. Log on to Windows by using an account that has administrative privileges, and then wait for Windows to detect new hardware.
  15. When the Found New Hardware Wizard starts, click Cancel.

    If you receive a stop error after you remove the updated display drivers, restart the computer and use the Last Known Good Configuration option. To do this, restart the computer, and then press the F8 key while the computer starts. On the Windows Advanced Options Menu that appears, use the ARROW keys to select Last Known Good Configuration, and then press ENTER.

    If you receive a "System Has Recovered from a Serious Error" message when Windows starts, restart the computer again. This error message does not recur.
  16. Obtain and install the latest drivers for your display adapter.For information about how to contact your computer manufacturer, visit the following Microsoft Web site: http://support.microsoft.com/gp/vendors (http://support.microsoft.com/gp/vendors)
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Oct 12, 2008 | Sony VAIO Digital Studio PCV-RX550 PC...

1 Answer

Failed to initialise hardware


Hi

It could be a problem with the drivers for the tv tuner card....
Pls uninstall the drivers and then reeat the tv tuner card and then reinstall the drivers for the tv tuner card.
Restart the computer after renstalling the drivers and check if it works.

Feb 25, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...