Question about Cameras

1 Answer

The little two part lens cover does not close when I turn the camera off. The lens does retract though. Is there some first aid I can preform to fix this.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,083 Answers

You can try spraying some compressed air in the front of the lens assembly, to try to free up the closing mech, but other than that, the camera has to be disassembled from the rear, all the way into the lens assembly to try to fix this problem, and it's an expensive fix. You might try taking it by a camera repair shop, and see if they have a trick up their sleeves, but I haven't heard of one.
If you do elect to have it repaired, get an estimate first, since the cost might just justify buying a new one on sale.
Good luck, hope this helps, and thanks for using FixYa.

Posted on Sep 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lens error


I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff    It will be helpfull for you. Its is a step by step solution with images.
Regards Mukesh

Jan 03, 2009 | Cameras

1 Answer

Lens will not retract


When the lens will not retract and camera is not functional (no picture on display, and does not shoot) , and you already tried replacing batteries with a new fresh set (ensure please) , and then restarting camera with no memory card inside, then camera is faulty.

Try an easy fix by pushing gently the lens (do not force them, just help them) while you turn off camera at same time. Try also switching the mode selector.

If still no luck , then the camera must be disassembled to fix the problem.

Possible reasons are :

  • Faulty lens mechanism or jammed lens (camera usually turns off by itself in this case)
  • Main board faulty.
  • Ribbon cable to main board broken or connector defective.
  • If there is no power at all it is the connector from batteries to main board, this is also a ribbon cable.

If the camera is less than one year old will be replaced by manufacturer.

If your warranty is expired you can get an estimate for repair from manufacturer, or from a third party like Advance Camera here :Advance Camera Repair you can book the repair online.

Aug 03, 2008 | Fuji FinePix F20 Digital Camera

2 Answers

Lens cover stuck DSC600


You may have the same problem that i had. It does involve taking the camera apart. Not overly difficult - just fiddly.
Let me know and i'll talk you thro' it

Jul 24, 2008 | Sony Cyber-shot DSC-S600 Digital Camera

13 Answers

Lens Error - Restart Camera : Lens remains in extended position.


Hey,

I had the same problem as everyone else regarding the error that would pop up stating that there was a lens error. I had the camera in my pocket when I went to a hockey game, pulled it out to take a picture, and it didn't work. Needless to say I was pissed because I expected far more from Canon. I was just about to go and buy a new camera, and figured that I would try to troubleshoot the problem and stumbled upon this site. Someone suggested turning the camera on and off while twisting the lens, so I figured it couldn't hurt to try it.

Before trying this, my lens would not retract all the way, the cover would not shut, the image was blurry, and I could not zoom in at all or the camera would show the error.

So, I tried the "twisting" solution, and it wasn't working, but I think I was being too delicate with it. I put a little more pressure on it and gave it a good twist. There was a clicking noise as others have said, but in the end, it worked after about 2 or 3 minutes of messing with it. No my lens goes down, the cover shuts and its clear as a bell. Not sure if this is a recurring problem as it appears to be a common problem, I fully suggest trying this before you send it off to get it fixed for a ridiculous amount of money.

Best of luck

May 03, 2008 | Canon PowerShot SD870 IS Digital Camera

1 Answer

Lens doesn't retract when cover hits it. Only way to get lens to retract is to take out battery, put it back in, and then the lens slooooowly retracts, but will bounce back out if cover is closed...


The original problem was a camera with jammed lens mechanism or faulty lens motor. I think the camera had been replaced.

The following post is directed to new users following up on this thread, as the original problem had already been sorted:

When the lens will not retract and camera is not functional (no picture on display, and does not shoot) , and you already tried replacing batteries with a new fresh set (ensure please) , and then restarting camera with no memory card inside, then camera is faulty.

Try an easy fix by pushing gently the lens (do not force them, just help them) while you turn off camera at same time. Try also switching the mode selector.

If still no luck , then the camera must be disassembled to fix the problem.

Possible reasons are :

  • Faulty lens mechanism or jammed lens (camera usually turns off by itself in this case)
  • Main board faulty.
  • Ribbon cable to main board broken or connector defective.
  • If there is no power at all it is the connector from batteries to main board, this is also a ribbon cable.

If the camera is less than one year old will be replaced by manufacturer.

If your warranty is expired you can get an estimate for repair from manufacturer, or from a third party like Advance Camera here :Advance Camera Repair you can book the repair online.

Sep 12, 2007 | Olympus Stylus 400 Digital Camera

1 Answer

Casio Ex-z55 Lens cover not closing and lens does not operate


Buy the next camera- at 3 years old no economic repair will be feasible- but you could play with it some I guess

Aug 29, 2007 | Casio Exilim EX-Z55 Digital Camera

2 Answers

Lens shutter stuck


If you're careful this problem is a relatively easy fix for many digital cameras. The design of the lens cover mechanism is usually simple and very similar throughout camera brands. Here's an example fix for a Canon A400 with similar problems:

http://camerarepair.blogspot.com/2007/11/repair-of-stuck-lens-covers.html

Jan 24, 2007 | Fuji FinePix A340 Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...