Question about 3Com SuperStack 3 4400 (3C17204-US) 48x10/100 Mbps Networking Switch

2 Answers

Fiber module sir, if i replace the fiber module,i have to configer the ip?? how to go insite the switch e: 199.256.0.1 or someting als??

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Hi,

you can login though the console cable, switch back side conso;e port will be there, it will bw like RJ 45 port

Posted on Jun 07, 2008

  • paru v
    paru v Jul 09, 2008

    fiber module is used only for paching purpose,like fibre to fibre connetor.No need to change any ip address.

×

  • Level 1:

    An expert who has achieved level 1.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Dear,I work for Ingellen Communication Equipment and we are a large fiber optic products manufacturer in Shenzhen. exception with fiber optic transceiver.
Kindly let me know your specific requirements so that i can help
http://www.ingellen.com/fiber-optic-transceiver-c-1.html

Posted on Jul 12, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get airbag module out of dash on my 98gmc 1500


Remove the instrument panel. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gauges and Console. Remove the fasteners (5) (4) that retain the inflatable restraint IP module to the instrument panel (3). Remove the inflatable restraint module (2) from the instrument panel (3). Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling, Shipping, and Scrapping .
Removal Procedure
Instrument Panel Carrier Replacement

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.
  1. Disconnect the negative battery cable(s).
  2. Disable the SIR system. Refer to Disabling the SIR System in SIR.
  3. Remove the three relay center bolts from the underside of the wheel opening.
  4. Remove the bulkhead connector.
  5. Remove the following components from the bulkhead connector:
  6. ?€¢
    The screws from the convenience center to the cowl


    ?€¢
    The cruise control harness (if equipped)


    ?€¢
    The forward lamp harness


    ?€¢
    The SIR system harness


    ?€¢
    The relay center

  7. Remove the coolant reservoir. Refer Coolant Recovery Reservoir Replacement in Engine Cooling.
  8. Disconnect the antenna lead-in and the grommet.
  9. Remove the knee bolster. Refer to Knee Bolster Replacement .
  10. Remove the steering shaft pinch bolt.
  11. Remove the left and the right sill plate front screw.
  12. Remove the left and the right hinge pillar trim panels. Refer to Body Hinge Pillar Trim Panel Replacement in Interior Trim.
  13. Remove the brake release handle from the cable.
  14. The clip releases the handle from the cable.
  15. Remove the reaction plate assembly.
  16. Remove the tie bar.
  17. Remove the knee deflector bracket.
  18. Disconnect the 8-way column connector.
  19. Disconnect the 48-way connector retainer in order to access the two lower column nuts.
  20. Disconnect the shift cable (Automatic transmission).
  21. Remove the steering column from the vehicle.
  22. Remove the shift levers.
  23. ?€¢
    Remove the transfer case knob by pulling the knob straight up. S4WD models must be in the 4-LO range.


    ?€¢
    Remove the manual transmission shift lever (if equipped).

  24. Remove the front floor console, if necessary.
  25. Remove the left and the right lower IP pivot bolts.
  26. Remove the IP storage compartment door. Remove the IP storage compartment.
    Squeeze the compartment in order to release the compartment.
    Remove the two IP attaching bolts through the storage compartment door
    1. Remove the center support screw.
    2. Remove the three IP upper support screws.
    3. Remove the IP from the front of the dash.
    4. Disconnect the park brake lever. Refer to Park Brake Lever Assembly Replacement in Parking Brake.
    5. Disconnect the following electrical connectors as necessary:
    6. ?€¢
      The sensing and diagnostic module (SDM)


      ?€¢
      The Heating, Ventilation and Air Conditioning module (HVACM)


      ?€¢
      The 22-way engine harness


      ?€¢
      The stoplamp switch


      ?€¢
      The vehicle speed sensor (VSS) calibrator module


      ?€¢
      The clutch or brake release switches


      ?€¢
      The electronic accelerator (Diesel)


      ?€¢
      The HVAC control cables (if equipped)

    7. Remove the IP from the vehicle.
    To this point, the IP removal is complete. If the IP is being replaced or refinished.
    Remove the accessory switch(es) as necessary. Remove the instrument cluster bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement . Remove the headlamp switch. Remove the HVAC control assembly.
    4.1.
    Disconnect the electrical connectors.


    4.2.
    Disconnect the cables (if equipped).

    Remove the instrument cluster screws and the cluster. Refer to Instrument Cluster Replacement .
    Remove the IP storage compartment.
    Squeeze the compartment in order to release the compartment.
    Remove the IP storage compartment lamp.
    Slide the compartment in order to release the compartment.
    Remove the low coolant module (Diesel only). Remove the data link connector (DLC).
    20.1.
    Remove the one screw.


    20.2.
    Slide the DLC out.

    Remove the harness retainer to accessory switches. Remove the fuse panel and the courtesy lamp switch. Remove the ground screw. Remove the harness from the IP. Remove the jumper harness to the remote playback device (if equipped). Remove the courtesy lamp switches. Remove the side window defogger outlets. Remove the park brake cable clips. Remove both of the air outlet deflectors

Oct 03, 2015 | Cars & Trucks

1 Answer

What is the default ip address for powerconnect 5212


You must assign an IP address to the switch to gain management access over the network. You may also need to a establish a default gateway between the switch and management stations that exist on another network segment. You can statically configure a specific IP address or direct the switch to obtain an address from a Boot Protocol (BOOTP) or Dynamic Host Configuration Protocol (DHCP) server when it is powered on. Valid IP addresses consist of four decimal numbers, 0 to 255, separated by periods. Anything outside this format is not accepted by the CLI program. notice.gif NOTICE: By default, the IP address is assigned to VLAN 1 through DHCP. If you select the bootp or dhcp option, IP is enabled but does not function until a BOOTP or DHCP reply has been received. Requests are broadcast periodically by the switch in an effort to learn its IP address. (BOOTP and DHCP values can include the IP address, default gateway, and subnet mask).
To display assigned IP settings using the CLI:
  1. From the Privileged Exec or Normal Exec level mode, type show ip interface and press <Enter>.

The assigned IP address and subnet mask displays.

  1. From the Privileged Exec mode, type show ip redirects to display the assigned gateway IP address. Press <Enter>.

The following example displays IP settings assigned by bootp or dhcp using the CLI.

Console#show ip interface

IP address and netmask: 10.1.0.1 255.255.252.0 on VLAN 1,

and address mode: User specified.

Console# show ip redirects

ip default gateway 10.1.0.254

Console#
Before you can assign a static IP address to the switch, you must obtain the following information from your network administrator:

  • IP address for the switch

  • Default gateway for the network

  • Network mask for the network

To assign a static IP address to the switch:
  1. From the Privileged Exec level global configuration mode prompt, type interface vlan 1 to access the interface-configuration mode. Press <Enter>.

  2. Type ip address ip-address netmask, where ip-address is the switch IP address and netmask is the network mask for the network.

  3. Type exit to return to the global configuration mode prompt. Press <Enter>.

  4. To set the IP address of the default gateway for the network to which the switch belongs, type ip default-gateway gateway, where gateway is the IP address of the default gateway. Press <Enter>.

  5. To save your configuration changes, type copy running-config startup-config and then press <Enter>.

notice.gif NOTICE: Only one VLAN can be assigned an IP address. If you assign an address to any other VLAN, the new address overrides the original IP address. The following example shows how to set a static IP address using the CLI.

Console(config)# interface vlan 1

Console(config-if)# ip address 192.168.1.5 255.255.255.0

Console(config-if)# exit

Console(config)# ip default-gateway 192.168.1.254

Console(config)#
To configure the switch for DHCP or BOOTP:

  1. From the Privileged Exec level global configuration mode prompt, type interface vlan 1 to access the interface-configuration mode. Press <Enter>.

  2. At the next prompt, use one of the following commands:

    • To obtain IP settings through DHCP, type ip address dhcp

    • To obtain IP setting through BOOTP, type ip address bootp

  3. Press <Enter>.

  4. To save your configuration changes, type copy running-config startup-config, and then press <Enter>.

Nov 26, 2012 | Computers & Internet

1 Answer

How do i configure the switch to allow web access through the serial port


If you can't find the manual on the Dell web site, there is a copy at: http://www.manualowl.com/m/Dell/PowerConnect-3548/Manual/188907

Did you use the command: ip http server ? See page 501 in the manual.

I would not recommend setting up a network switch with password-free access to the internet. You should at the very least limit access to a small subset of IP addresses (e.g. your network group's machines). The best practice is to use ssh communications or https with the web browser, otherwise anyone with a well-placed sniffer can read your clear-text traffic.

Sep 19, 2012 | Dell PowerConnect 3548

1 Answer

CODE B0026 HOW DO I RESOLVE? REAR DOOR LOCKS NOT WORKING, SERVICE BRAKE BOOSTER WARNING ON, AIRBAG LIGHT ON, SERVICE AIRBAG WIRNING, INTERMIT NO START. HELP MEEEE!!!!!!


The airbag connectors in behind the front kick panels have high resistance. The fix is to replace them. Here is TSB's

#05-09-41-001B: Supplemental Inflatable Restraint (SIR) Light ON, Diagnostic Trouble Codes (Inspect/Replace IP Harness to Inflatable Restraint Module (Air Bag) Yellow 4-Way Connector C221 and/or C222) - (Jun 2, 2008)

Subject:
Supplemental Inflatable Restraint (SIR) Light ON, Diagnostic Trouble Codes (DTC) B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 (Inspect and/or Replace IP Harness to Inflatable Restraint Module (Air Bag) Yellow 4-Way Connector C221 and/or C222)

Models:
2003-2006 Cadillac Escalade Models
2003-2006 Chevrolet Avalanche, Suburban, Tahoe
2003-2007 Chevrolet Silverado (Classic Only)
2003-2006 GMC Yukon, Yukon XL, Yukon Denali, Yukon Denali XL
2003-2007 GMC Sierra (Classic Only)

This bulletin is being revised to add the 2007 model year for pickups and change a part number. Please discard Corporate Bulletin Number 05-09-41-001A (Section 09 -- Restraints).

Condition
Some customers may comment that the Service Supplemental Inflatable Restraint Light is on.

Diagnosis with a scan tool may indicate a DTC B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044.

Cause
The most likely cause of any one of the following DTCs: B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 is improper connection/high resistance in the IP harness to inflatable restraint module connector C221 and/or C222.

Diagnostic Information
DTC B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 will set when one of the following conditions occur:
• The SDM detects the air bag module deployment loop resistance is greater than 4.8 ohms for 500 milliseconds.
• The SDM detects that the voltage at the air bag module high control is less than 2.4 volts and deployment loop resistance is 6 ohms or greater for 500 milliseconds.
• For additional diagnostic information, refer to DTC B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 in the appropriate SI Document.

Correction

DO THIS
Test for proper connection/high resistance at connector C221 and/or C222.

Don't Do This
DO NOT replace SIR system components prior to testing for proper connection/high resistance in C221 and/or for DTCs B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044.

Caution: When performing service on or near the SIR components or the SIR wiring, the SIR system must be disabled. Refer to SIR Disabling and Enabling Zones. Failure to observe the correct procedure could cause deployment of the SIR components, personal injury, or unnecessary SIR system repairs.

Important: The IP harness to inflatable restraint module connectors C221 or C222 is NOT located at the base of the steering column...
• C221 (4 Cavities) -- I/P Harness to Body Harness, behind the left kick panel
• C222 (4 Cavities) (w/o HP2) -- I/P harness to body harness, behind the right kick panel
• C222 (4 Cavities) (w/HP2) -- Behind the left side I/P access panel
• Refer to the Master Electrical Component List for additional location information.

1. Remove the appropriate side door sill plate.
2. Remove the appropriate side hinge pillar panel.
3. Locate the IP harness to inflatable restraint module yellow 4-way connector C221 or C222.
4. Inspect the IP harness to inflatable restraint module connector C221 or C222 for proper connection.
5. Disconnect and reconnect the IP harness to inflatable restraint module connector C221 or C222 THREE times.
6. Clear the DTC and road test the vehicle.
• If DTCs B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 DOES NOT reset, no additional repairs are necessary. Continue with step 10.
• If DTCs B0013, B0014, B0017, B0018, B0024, B0026, B0043, B0044 DOES reset, the most likely cause is high resistance in the IP harness to inflatable restraint module connector C221 or C222. Continue with the next step.
7. Replace the appropriate connector C221 and/or C222, P/N's 15306186 and 88987998. Refer to SIR/SRS Wiring Repairs (SI Document ID #325229).
8. Road test the vehicle and confirm that the repair is complete.
9. Install the driver's side hinge pillar panel.
10. Install the driver's side door sill plate.

Parts Information
Part Number: 15306186
Description: Connector (4-way Female, w/Leads) - Qty 1

Part Number: 88987998
Description: Connector (4-way Male, w/Leads) - Qty 1


Hope this help (remember comment and rated this help).

May 07, 2010 | 2003 Chevrolet Suburban 1500

1 Answer

IP IOS Command not working with switch


you want to give IPs to your VLANs and also make physical interfaces members of a VLAN instead of giving IPs to physical interfaces

Mar 05, 2009 | Cisco Catalyst 2960 8-Port Ethernet Switch...

1 Answer

EnGenius Mesh AP


you will get a software which hacks the ip address search in google pls rate

Jan 20, 2009 | EnGenius EUB-362 (EUB362 EXT) Wireless...

1 Answer

I nees to setup Quintum A800 for termination can anyone help me


Command line for termination A800 (Quantum)



Config unit 1# online 1

Config sys# mindn 10

Config sys# maxdn 20

Config pstntg 1# pass 0

Config pstntg 1# cassig 6

Config pstntg 1# super 3

Config pstntg 1# lamp 1 country code (91)

Config pstntg 1# Answerdel 120

Config pstntg 1# lamp 1 9101 01

Config pstntg 1# dis 1 a (ALL - ports)

Config pstntg 1# ena 1 a (ALL – ports)

Config gkadmin allow 1# ip xxx.xxx.xxx.xxx (GW ip + switch-ip)

Config dsp# voice 81 (for g723) voice 68 for (G729)

Config# submit




Local information

Name of this zone Hello
Country selection Canada
Local country code country code (91)
International prefix country code (91)

Hop-off PBX Numbers

91 public

9101 01 public

This configuration for termenation

Nov 20, 2008 | Quintum Tenor A800 (501-0026-00)

1 Answer

Ip conflict by using media of fiber cable in same network


You can configure the router to hand out DHCP clients in an assigned range. Set a limit on the DHCP clients, then configure the fiber connection as static and outside of the DHCP range. then they cannot conflict.

Nov 29, 2007 | Belkin (F5D6230-3) Wireless Router

Not finding what you are looking for?

Open Questions:

0 Answers

Random reboot of 3com 4400 stack Can you help, please? I have a 3Com 4400 stack running the latest version v6.13S. The stack sometimes reboots randomly. The logs showed the following: Unit 1 Watchdog handler is RESET The History Log Id No S/W Rel Reason UpTime SysErr 42 42 6.13s S/W Watchdog (r) 17 Hrs 42 Mins 52 Secs Uptime Hours 16828 Reset 41 43 43 6.13s S/W Watchdog (r) 0 Hrs 51 Mins 14 Secs Uptime Hours 16828 Reset 42 44 44 6.13s S/W Watchdog (r) 0 Hrs 47 Mins 54 Secs Uptime Hours 16828 Reset 43 45 45 6.13s S/W Watchdog (r) 0 Hrs 32 Mins 15 Secs Uptime Hours 16828 Reset 44 46 46 6.13s S/W Watchdog (r) 0 Hrs 18 Mins 48 Secs Uptime Hours 16828 Reset 45 47 47 6.13s S/W Watchdog (r) 0 Hrs 33 Mins 59 Secs Uptime Hours 16828 Reset 46 48 48 6.13s S/W Watchdog (r) 1 Hrs 9 Mins 57 Secs Uptime Hours 16829 Reset 47 49 49 6.13s S/W Watchdog (r) 0 Hrs 59 Mins 28 Secs Uptime Hours 16829 Reset 48 50 50 6.13s S/W Watchdog (r) 0 Hrs 42 Mins 37 Secs Uptime Hours 16829 Reset 49 51 51 6.13s S/W Watchdog (r) 20 Hrs 17 Mins 57 Secs Uptime Hours 16849 Reset 50 52 52 6.13s S/W Watchdog (r) 0 Hrs 5 Mins 19 Secs Uptime Hours 16849 Reset 51 53 53 6.13s S/W Watchdog (r) 0 Hrs 55 Mins 15 Secs Uptime Hours 16849 Reset 52 54 54 6.13s S/W Watchdog (r) 0 Hrs 37 Mins 23 Secs Uptime Hours 16849 Reset 53 55 55 6.13s S/W Watchdog (r) 1 Hrs 26 Mins 17 Secs Uptime Hours 16850 Reset 54 56 56 6.13s S/W Watchdog (r) 1 Hrs 42 Mins 12 Secs Uptime Hours 16851 Reset 55 57 57 6.13s S/W Watchdog (r) 17 Hrs 26 Mins 34 Secs Uptime Hours 16868 Reset 56 Assertions : Id S/W Rel File Name Line 5 3.00 agg_sma.c 1215 6 3.00 agg_sma.c 1215 7 3.00 agg_sma.c 1215 8 3.00 agg_sma.c 1215 9 3.00 agg_sma.c 1215 10 3.00 agg_sma.c 1215 14 3.00 agg_sma.c 1215 Last System Error Data: ID (57) S/W Rel (6.13s) Reason (S/W Watchdog) Unit 2 Watchdog handler is RESET The History Log Id No S/W Rel Reason UpTime SysErr 236 236 6.13s S/W Watchdog (r) 0 Hrs 10 Mins 55 Secs Uptime Hours 48145 Reset 235 237 237 6.13s S/W Watchdog (r) 2 Hrs 2 Mins 20 Secs Uptime Hours 48147 Reset 236 238 238 6.13s S/W Watchdog (r) 0 Hrs 29 Mins 15 Secs Uptime Hours 48147 Reset 237 239 239 6.13s Power (r) 2 Hrs 0 Mins 0 Secs Uptime Hours 48149 Reset 238 240 240 6.13s S/W Watchdog (r) 17 Hrs 5 Mins 9 Secs Uptime Hours 48166 Reset 239 241 241 6.13s S/W Watchdog (r) 2 Hrs 55 Mins 1 Secs Uptime Hours 48168 Reset 240 242 242 6.13s Power (r) 3 Hrs 0 Mins 0 Secs Uptime Hours 48171 Reset 241 243 243 6.13s S/W Watchdog (r) 91 Hrs 47 Mins 28 Secs Uptime Hours 48262 Reset 242 244 244 6.13s S/W Watchdog (r) 45 Hrs 25 Mins 25 Secs Uptime Hours 48307 Reset 243 245 245 6.13s S/W Watchdog (r) 4 Hrs 29 Mins 38 Secs Uptime Hours 48311 Reset 244 246 246 6.13s S/W Watchdog (r) 117 Hrs 3 Mins 10 Secs Uptime Hours 48428 Reset 245 247 247 6.13s S/W Watchdog (r) 0 Hrs 32 Mins 9 Secs Uptime Hours 48428 Reset 246 248 248 6.13s S/W Watchdog (r) 3 Hrs 11 Mins 54 Secs Uptime Hours 48431 Reset 247 249 249 6.13s S/W Watchdog (r) 20 Hrs 52 Mins 50 Secs Uptime Hours 48451 Reset 248 250 250 6.13s S/W Watchdog (r) 3 Hrs 5 Mins 37 Secs Uptime Hours 48454 Reset 249 251 251 6.13s S/W Watchdog (r) 1 Hrs 42 Mins 13 Secs Uptime Hours 48455 Reset 250 Assertions : Id S/W Rel File Name Line 129 6.10s lazy_ack.c 890 137 6.10s poller.cc 1104 138 6.10s poller.cc 1104 152 6.10s lazy_ack.c 890 158 6.10s lazy_ack.c 890 159 6.10s lazy_ack.c 890 169 6.10s lazy_ack.c 890 170 6.10s lazy_ack.c 890 173 6.10s lazy_ack.c 890 175 6.10s lazy_ack.c 890 187 6.10s lazy_ack.c 890 191 6.10s lazy_ack.c 890 199 6.10s lazy_ack.c 890 208 6.13s lazy_ack.c 890 209 6.13s lazy_ack.c 890 225 6.13s lazy_ack.c 890 Last System Error Data: ID (251) S/W Rel (6.13s) Reason (S/W Watchdog)

May 14, 2009 | 3Com SuperStack 3 4400 (3C17204-US)...

3Com SuperStack 3 4400 (3C17204-US) 48x10/100 Mbps Networking Switch Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3Com Computers & Internet Experts

NBX_Tech
NBX_Tech

Level 1 Expert

58 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

micky dee

Level 3 Expert

2644 Answers

Are you a 3Com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...