Question about Ge Medical Systems Ge Marquette Mac 1200 Interpretive Ecg

1 Answer

EKG machine not printing - Ge Medical Systems Ge Marquette Mac 1200 Interpretive Ecg

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

I would need a little more info to be more exact but there are a few usual causes for this issue. Bad feed roller (you can here it spinning but paper does not move), bad optical sensor (a faint click, very little paper movment), wrong paper (same as bad optical sensor or might just continue to cycle through paper without printing), bad print head (system acts just like it does when it is printing normally but nothing appears on the page) or bad battery (system tries to print but shuts down almost immediatly even if it is plugged in). You can contact me and give me more info and I would be happy to help.
wats@mesasales.com or www.overstockme.com or follow us on twitter at overstockmecom

Posted on Sep 04, 2010

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 71 Answers

SOURCE: GE MAC1000ekg not printing clearly

The heat on the print head can fade over time giving you a poor print. also the feed roller can wear and give poor pressure to the print head. thw way to diagnose it is to put a peice of electrical tape on the print roller and print an ekg. if it prints well in the area where the tape was, it is the print roller. if there is no change it is the print head.
wats@mesasales.com. www.overstockme.com. Jeff Watson

Posted on Jan 01, 2010

  • 1 Answer

SOURCE: EKG Machine

3 lead machines are designed to monitor the cardiac rhythm cycle, in 3 of the 12 primary leads. An attempt to use this limited information as a true diagnostic tool would be incomplete and perhaps misleading.

A full 12-lead machine is diagnostic, and looks at the elecrical information from all sides ("walls", ie anterior, septal, inferior, lateral, posterior) of the heart and gives detailed information regarding ischemia and or infarction of the cardiac muscle, electrical conduction system function, electrical axis, chamber enlargement, drug effects, and more.

Hope this helps.

Posted on May 08, 2009

  • 1 Answer

SOURCE: lower half or EKG would not print properly

You should purchase a printer kit. This is a common problem I have encoutntered on this machine and this machine is identical to the Seca CT6I. I have ordered the printer kit from Seca in the UK, the part number is 9740490024 at a cost of £70. It is a straightforward repair.

Posted on Sep 11, 2009

johnhakim
  • 2 Answers

SOURCE: Our MAC 1200 ekg machine

my mach 1200 does not have "operating mode" or start at queue mark.
not helpful for me.

Posted on Oct 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to load paper


How to load paper - Fixya

www.fixya.com > Forum > EKG/ECG Machines
39 mins ago - How to load paper - EKG/ECG Machines question. ... Machines. Open Question ... Aug 30, 2012 ' Schiller Cardiovit At 2 Light Ecg Machine.

Loading paper into the MAC 1200 ecg machine - Fixya

www.fixya.com/.../t4590309-loading_paper_into_mac_1200_ecg_mach...
Apr 19, 2010 - loading paper into the MAC 1200 ecg machine how to load the paperinto the machine? ... Ge Medical Systems Ge Marquette Mac 1200 question.

Contec ECG Monitor & pulse oximeter Ekg printed sheet ...

www.hcuck.com/search/p1207318-contec_ecg.../ekg_printed_sheet
Question about Ge Medical Systems EKG/ECG Machines ... Open the . ... ...ekg-manual The paper is is backwards, there are 4 ways to load paper BUT only 1 ...

Electrocardiograph (EKG / ECG) Questions and Answers


Dec 21, 2015 | Medical

1 Answer

EKG machine not printing properly


hi,
If its mac 1200 then try to check the battery and replace the same. here i have added the part number of the battery. Hi,
Here is its part number 303 44270, 18V 1.4Ah nickel cadmium Battery ,

Jun 07, 2013 | Philips AED FR2+ with Extras

1 Answer

The machine prints Lead I but nothing else. What should I do?


Your print head probably needs adjust. The Schiller ekg machines are notorious for these issues. You may want to send the machine in. We/ Discount Cardiology will look at your machine for free and call you with a diagnosis. I am 99% sure that this is the issue.

Aug 23, 2012 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

The ekg machine light of filter is flickering and when printing only prints one line out of three appears as if no ink


HI,
Here i added a link which will help you to rectify the problem. Its seems to be the battery of your ECG machine is faulty.

Schiller AT 1 Support

Jun 25, 2012 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

The machine cuts off power as it tries to print the ekg


hi,
Change the battery, will solve your problem. Its a 12v battery. For replacing the battery you have to open the ecg machine by removing the screws at its bottom.
ok

Feb 26, 2011 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

GE MAC1000ekg not printing clearly . My EKG machine is recording the EKG well but when I print it comes out very faded.


The heat on the print head can fade over time giving you a poor print. also the feed roller can wear and give poor pressure to the print head. thw way to diagnose it is to put a peice of electrical tape on the print roller and print an ekg. if it prints well in the area where the tape was, it is the print roller. if there is no change it is the print head.
wats@mesasales.com. www.overstockme.com. Jeff Watson

Nov 17, 2009 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

Lower half or EKG would not print properly


You should purchase a printer kit. This is a common problem I have encoutntered on this machine and this machine is identical to the Seca CT6I. I have ordered the printer kit from Seca in the UK, the part number is 9740490024 at a cost of £70. It is a straightforward repair.

Sep 07, 2009 | Schiller Welch Allyn Cardiovit At 2...

2 Answers

Won't give print out on Automatic but will give on manual


Turn off the machine & then turn on after 10 seconds. than press ALT 1 1 0 STOP in a sequence. That will solve your problem for printing in AUTOMATIC Mode

Jun 10, 2009 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

SCHILLER AT 2 EKG ISN"T PRINTING ON AUTO PRINT I NEED TO KNOW HOW TO RESET IT. I'M LOOKING FOR A MANUAL.


my machine now printed 2 paper in auto print mode, i want this print one paper .Can you help me solve this problem?
hoanghung_hoanghung24@yahoo.com

Apr 07, 2009 | RTO Schiller AT-2i Electrocardiograph -...

1 Answer

I ahve a schiller welch allen EKG machine, and now it only prints


If it stops printing completely in the middle of doing the print, it is because the battery is bad and needs to be replaced.
If it only prints some of the leads but it does print the full report it is because you have the leads mixed up (Wrong spot on the patient) or the leads are mislabeled or some of the clips or electrodes are bad.
I can fix these. Let me know if you need help.

Apr 05, 2009 | Schiller Welch Allyn Cardiovit At 2...

Not finding what you are looking for?
Ge Medical Systems Ge Marquette Mac 1200 Interpretive Ecg Logo

1,050 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ge Medical Systems Medical Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Steven Clarke
Steven Clarke

Level 2 Expert

222 Answers

ka4iup
ka4iup

Level 3 Expert

3957 Answers

Are you a Ge Medical Systems Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...