Question about Televison & Video

Open Question

Hi, We have a Videoman VS-901 BW door intercom, and we need to check the wiring sequence on the rear of the handset, because there is no sound from the door station to the house video phone. Would you know where we can find a manual which may assist? thankyou, Steve

Posted by on

  • Russ Nov 19, 2011

    Hi Steve
    We have the same issue - did you ever get wiring instructions?
    Thanks
    Russ

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 146 Answers

SOURCE: no intercom connection between handsets

Here is a link to the uniden manual link and an excerpt from the manual section which deals with your problem :
http://www.uniden.com/products/productdetail.cfm?product=TRU8885-2

The handset doesn't
communicate with other
handsets.
• De-register the handset (see "De-register the Handset" on page 32) and register the handset
(see "Register the Handset" on page 68).
• Make sure that you have registered all handsets.
An extra handset can't join
the conversation.
• Make sure there are not 2 handsets already using the 3-way conference feature.
The handset or the base can't
join the conversation
• Make sure that another handset or base is in privacy mode.

To register a TCX805 handset, simply place it in the main base.
While the handset is registering, H a n d s e t R e g i s t e r i n g will appear in the LCD.
When R e g i s t r a t i o n c o m p l e t e . is displayed, the handset has been registered to
the base. If R e g i s t r a t i o n f a i l e d . appears, please try these steps again.
To register a ELX500, TCX440, or TCX400 handset, follow the steps below:
1) Disconnect the AC adapter from the main base.
2) While pressing down flash/find hs, reconnect the AC adapter.
3) On the handset, press and hold # until you hear a beep.
While the handset is registering, H a n d s e t R e g i s t e r i n g will appear in the LCD. When
R e g i s t r a t i o n c o m p l e t e . is displayed, the handset has been registered to the base. If
R e g i s t r a t i o n f a i l e d . appears, please try these steps again.

Posted on Jan 16, 2008

johnychel
  • 796 Answers

SOURCE: huskylock 901

click here to view the tutorial

Posted on Apr 06, 2008

  • 79 Answers

SOURCE: how to use intercom between two handsets

For models with 2 or more
handsets included
Making an intercom call
1 Press {INTERCOM}
2 To page the base unit, press {0}.
To page another handset, enter its
extension number ({1} – {4}).
The destination unit beeps for up to 1
minute. Someone else can answer the other unit and talk to you.
3 To end the intercom call, press {OFF}.

Posted on Aug 24, 2008

  • 1 Answer

SOURCE: Merging 2 siemens gigaset 4215 systems (one base with 2 phones + 2 phones)

If you're trying to get 5 handsets to work with one base, it won't work. The 4215 can only handle 4 handsets, the base handset plus 3.

When I had to replace the base of my 4 handset system, the base handset still worked. Therefore I had an extra handset which couldn't be used. So I decided to buy another base. Now I have 6 handsets which can be grouped 4,2 or 3,3.

Posted on Aug 27, 2008

  • 3 Answers

SOURCE: Need the schematic for a Videoman JCS-701 rear camera monitor so we can wire a new plug for the back of the monitor. Someone cut off the old one.

facing the rear of the monitor, the two round 5 pin plugs on the left are the rear camera plugs on the far right four pin square plug red cable terminal 15 ign power... black cable terminal 31 neg battery... orange cable back-up lights... white cable to hopper lights.., I have a full wiring diagram for the system if you needa copy e-mail me at ssmith01@charter.net

Posted on Jun 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My doorbell and intercom are not working


I would suggest contacting ADT and tell them about what he did, and what problems have happened since that time and have them come back to correct them. This sounds like the repair person is not fully experienced with the work he did.

May 20, 2014 | Cyrex Networks Cyrex EX-320H bw expansion...

1 Answer

How can i do two way on panasonic 5.8ghz


These directions are for the KX-TG5451, KX-TG5452 and KX-TG5453.

If you want to use the intercom feature, you need to know the handset number for the unit you want to contact. The base is zero. The handset number is set when you register the handsets. So to communicate with the base, press Intercom on the handset followed 0. The base will ring until someone presses Call to answer it (or one minute whichever comes first). (Alternatively, you can use the up/down arrows to select H1, H2, H3 or Base. Then press the right arrow key.)

To communicate between two handsets, press Intercom and then 2 (from handset 1 or 3 to connect with handset 2). Again the handset will ring for one minute or until the person with handset 2 answers. (To answer, they can press the phone, speaker or intercom button.)

If someone at the base wants to use the intercom, they need to press Select until the appropriate handset number is displayed. Then press Call.

To transfer a call, press Intercom and then select the desired handset. When the intercom message is picked up, indicate that a call is being transferred and press Off at the handset or base that initially answered the call.

For a conference call, initiate the call then press Intercom and select the handset to join the conversation. Once that person picks up, then press Conf. (I believe that Conf is a softkey so check the display.) This is only possible with the handset. (Another handset can join the conference by pressing the phone or speaker button on that unit.)

The manual for the KXTG5453 is available here: http://service.us.panasonic.com/OPERMANPDF/KXTG5451S.PDF .

If you have a different model of the Panasonic 5.8 GHz phone, please add a comment with the model number and I'll try to give the directions for that unit.

I hope this helps.

Cindy Wells

Aug 11, 2011 | Panasonic KX-TG5453PK 5.8 GHz DSS Cordless...

2 Answers

Intercom does not work


There needs to be an additional instruction. I am having the same problem. From standby mode, I press Intercom, the screen says "Please wait" for 2-3 seconds, then I choose a handset. Nothing happens. The user guide doesn't have any additional instructions after this point. I don't hear any paging or anything other than silence on any handset.

Jun 15, 2011 | Uniden D16602 Twin Cordless Phone

2 Answers

Can not rec a dial tone, phone states no link to base move closer



If “No link to base. Move closer to base, try again.” is displayed
even when using the handset near the base unit, the handset may have lost communication with the base unit. You need to re-register the handset to the base unit.
• Make sure the base unit is not being used.
• Have both handsets and base unit nearby during registration.
• Follow steps 1–3 listed below. You have about 1 minute to complete them.
• Confirm the extension number of the handset which has lost the communication by placing the handset on the base unit or charger.
If you re-register the handset using the other handset’s extension number, the other handset will not function.
• If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Try again from step 1.
• You can stop registration by pressing [OFF] on the handset, and pressing [LOCATOR/INTERCOM] on the base unit.

1 Base unit: Press and hold [LOCATOR/INTERCOM] until a beep sounds.
• The CHARGE indicator flashes.

2 Base unit: Press the extension number [1] (handset symbol 1 ) or [2] (handset symbol 2) of the
handset which has lost the communication.

3 Handset: Press and hold [FLASH/CALL WAIT] until “Handset Registering” is displayed.
• When registration is complete, a beep sounds from the handset and the display shows the number.
• Wait for 20 seconds after registration is complete while the handset establishes communication with the base unit.


• If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Try again from step 1.
• You can stop registration by pressing [OFF] on the handset, and pressing [LOCATOR/INTERCOM] on the base unit.

Feb 23, 2010 | Panasonic KX-TG2357 Cordless Phone

4 Answers

How do i use the intercom on my Uniden dect. 6.0?


March 25, 2013 - INTERCOM INSTRUCTIONS
Here is the answer! Press the INTERCOM button one time.
The INTERCOM display will show on the screen.
Use the UP or DOWN arrow button to select the HANDSET number.
Press the MENU/SELECT button to ring the HANDSET selected.
Press the END button when done talking

Sep 01, 2009 | Uniden DECT 6.0 Cordless Telephone...

2 Answers

Need the schematic for a Videoman JCS-701 rear camera monitor so we can wire a new plug for the back of the monitor. Someone cut off the old one.


facing the rear of the monitor, the two round 5 pin plugs on the left are the rear camera plugs on the far right four pin square plug red cable terminal 15 ign power... black cable terminal 31 neg battery... orange cable back-up lights... white cable to hopper lights.., I have a full wiring diagram for the system if you needa copy e-mail me at ssmith01@charter.net

Apr 29, 2009 | Car Audio & Video

1 Answer

Intercom rings and there is no one there, the sound of dialing pr


You might have a door phone that was installed and programmed as a door phone extension. Now a physical phone that is connected to a previous door phone port is causing this.
Check your #604 and #605 command

Jan 13, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

Sound ok on my WS-55859, but picture is only in BW


The problem is in the Video Circuit board. Chances are that an IC has failed or there is a cold solder joint on the board somewhere. Don't attempt to repair this problem unless you know exactly what you are doing. I suggest that you get an estimate before you have any repairs done and then do a cost of repair vs. replacement comparison. 
Hope this helps you out.

Jan 03, 2009 | Mitsubishi WS-55859 55" Rear Projection...

1 Answer

Intercom Question


k whats the question

basics the intercom is switch one unit to another unit so you dont have to get up and also when not in calls the intercom lets you speak to someone else example= hubby in garage and has a handset and your in the kitchen pick up handset hit intercom it rings to hubby and u tell him dinners ready or something like that its really a fun gadget to use :D

Apr 14, 2008 | Uniden Cordless Phone

6 Answers

2-9450c telephone will not setup


Each telephone must be connected to line 1 and line 2 for
proper operation. The remaining lines 3 and 4 may — or may not —
be connected to each station as you desire. First plug in the battery, then the phone lines (1 & 2 are mandatory), and third the power cord. If your intercome LED is blinking red and green, then press: STORE IN, followed by "INTERCOM" followed by a free intercom# (i.e., any of the memory buttons 1 through 16 not already assigned to another telephone set. Then wait for the phone to go through its initiation sequence during which it searches each of the four possible lines. After that concludes, you should get dial tone on your active lines. :-) Marco

Sep 26, 2007 | GE 2-9450C Corded Phone

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...