I want to have a driver of the panasonic laser KX-FL612? thanks!

Paper Pick up Rollers get dirty or worn out with the passage of time. Hence, require cleaning or replacement if worn out. In case you find them dirty use a soft, dry, lint free cloth to clean the rollers. Dont use chemicals as they may damage the rubber and plastic. However, if needed, you can use damp cloth or some cleaning liquid such as mild detergent of glass cleaner to damp the cloth. As you have posted your question under Panasonic KX-FL511 is would highlight the steps for it. Im Using a similar model KX-FL612



Lift the top Cover, Locate the roller and clean them..
Hope it helps! Good Luck!
CreativeTECH

(NOTE: This procedure will erase all previous memory. So print out your lists etc before beginning.)

Press the MENU button. Enter #9000 from keypad. Then enter *550 from keypad. Then press the START button. Then press the MENU button again.

Now unplug the power cord for at least 10 seconds.

Replug in power and now a page will print out saying "Thank you for purchasing this Panasonic Fax Machine".
God luck!

KX-FLB758 was apparently a clone of KX-FLB756 and KX-FLB751 model. Drivers available on the following page should work fine:

http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Fax-Printers/Laser-Multifunction-Fax/Drivers-Downloads/model.KX-FLB756.D#ts

hello sir i have panasonic fax kx-fl 612 error code is call service 3 pls help us how i can run my fax plz

it's means the fan is not working check the fan or connectioc if all are ok then reset it bu menu#9000*550 set

its polygon motor is defective try to reset the m/c press menu#9000*550 set maybe it's work

i lost my panasonic kx-mb772 driver cd

Dear Client, you can download driver from these links

1. Panasonic KX-PS 600 Laser Printer

2. Panasonic KX-PS 600 Laser Printer


Good luck in correcting your problem.
Best regards.

can i get software of kx-flb802cx

http://panasonic.net/pcc/support/fax/asia/table/flb852cx.htm

here is the driver you requested