Question about Office Equipment & Supplies

1 Answer

It ask printer absorver full, contact with service center

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,785 Answers

Canon waste ink full
With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4) When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s) according to the function listed in the table below. (Each time the Resume/Cancel button is pressed, the Alarm and
Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) [hth: I believe the power button has to be pressed once more after cycling the alarm button to complete the action. The power/resume-cancel button LEDs toggle to help you count.]

Time(s) LED indication Function Remarks
0 times Green (Power) Power off When the print head is not installed, the
carriage returns and locks in the home position capped.
1 time Orange (Alarm) Service test print See 3-4. Verification Items, (1) Service test print.
2 times Green (Power) EEPROM information print
See 3-4. Verification Items, (2) EEPROM information print.
3 times Orange (Alarm) EEPROM initialization [hth: does not re-initialize Waste ink counter]
>>>> 4 times Green (Power) Waste ink counter resetting
5 times Orange (Alarm) Destination settings [hth: not applicable]
6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)
[hth: 7-10 not applicable]
11 to 13 times Orange, Green, Orange (Alarm, Power, Alarm) Return to the menu selection
14 not used in servicing
15 Orange (alarm) return to the menu selection,.

Note: If the Resume/Cancel button is pressed 16 or more times, the Alarm or Power LED lights steadily without
any changes.

Posted on Sep 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error Message- Ink Absorver Full-MFC-J415W"


Sir/Madam
Your Brother Printer Machine automatically cleans after clearing a printer jam.And Brother Printer Machine automatically cleans after sitting idle for more than 45 days (infrequent use).

To solve the problem:
The ink absorbed box or flushing box will need to be replaced.

In Case You Still Need Online Help For Brother Printer,Then I Suggest You Follow Us For Brother Printer Support

Dec 20, 2012 | Brother Ink for Mfc J415w Printer

1 Answer

Memory full how to reset


which memory is showing full.

try to put the new toner cartridge

please contact for local authorised service center or a local call center.
ask them for a tech mode and memory clear option.

Else visit a local service center.

Feb 18, 2012 | Samsung SCX4623F Laser All-in-One Printer

1 Answer

Problem 5800


Hi! Your ink absorver tank is almost full, you need reset your printer. To reset your printer follow this instruction please : 1. Turn off the printer without pulling the power cords.
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Then Press Resume button 5 times then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state. Now your printer is ready to use.... thanks

Aug 12, 2011 | Canon Pixma iP2700 InkJet Photo Printer

1 Answer

Error 5...ink cartridge is not recognized after refilling


Clean the contact point of the cartridge to the printer before placing it, then **** some ink in the cartride by a cyringe to lessen the level of ink inside the cartridge. full ink cartridges encounter this error because the absorver inside the cartride overflows.

Mar 28, 2011 | Office Equipment & Supplies

1 Answer

How to solve this problem 'ink absorber full' and blink of E 2 7?


Hi,

To solve this, you need to replace the porous pad or the ink absorver and reset the counter. This means that you need to take your printer to an authorized repair center for your printer brand. They are trained to replaced the pad and reset the counter using software from the maker.

Jul 29, 2010 | Office Equipment & Supplies

1 Answer

Its appear " The ink absorber is full. Contact the service center."


Inkjet printers have a fibrous pad inside them that collects the waste ink from cleaning the print head. Over time, this pad fills up with ink and can no longer hold any more. When this occurs, the printer indicates a "waste ink full" error.

Replacing the waste ink absorption pads is something an authorized canon service facility can take care of for you.

May 11, 2009 | Office Equipment & Supplies

1 Answer

The waste ink absorver is almost full


It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
You have to send it to your nearest service centre to do the service job.
The WASTE INK ABSORBER KIT is approx. USD10/pcs

Jan 23, 2009 | Canon PIXMA iP90 InkJet Printer

1 Answer

Can't print


you have to open it and clean the ink absorver...you should reset the counter too....
Use SSC software counter reset waste reset...

i think this will solve your problem...Good lucky!

Dec 04, 2008 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

How to fix the waste ink absorver


You take it to the service and they clean the printer and reset the waste ink absorber. I did it twice.

Feb 02, 2008 | Canon PIXMA iP1500 InkJet Photo Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...