Question about HP Pavilion dv9000z Notebook

1 Answer

Network Adapter Problem New Computer

I have a HP Laptop and It Is 2 months old. I am showing a Error message & it won't Connect to my modem. This Problem just happened over night. Could this be caused by the virus: Backdoor. Hupigon?

The message is: The Network Adapter"atheros Ar5007 802-116/g wifi adapter" is experiencing driver or hardware related issues 6206-3284-N036-7801. Also it is saying resource settings-device isn't using any resources because it has a problem.

Please help what could this be?

thanks Pamm

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

Hello

is your wireless switich on, and please go in device manager and make sure you can see Atheros AR5007 in network adapter after that go right hand bottom on your laptop and see if it can detect wireless network if not, you can call HP and they will send you new wireless network adapter and no this is not Virus problem.


Thankyou

Posted on May 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why i cannot install a wi fi driver for my hp g7-2118nr with a windows 7 ultimate operating system


Turn on your computer and locate the Wi-Fi icon. This could be located on the upper row on a laptop it will have the radiation look ((())) Make sure its pressed on. Usually a wifi enabled phone, computer, or whatever device, will recognize if there is wifi access near you. Most new HP (Hewlett-Packard) Pavilion notebook computers as of August 2010 include an internal wireless networking adapter, used to connect to a wireless network or router. Once connected to a router, the computer can connect to the Internet or other computers on the same network. If the wireless networking adapter is not allowing the computer to connect to a router, there are several steps that can be used to remedy the problem. Ensure that the wireless network adapter is turned on. Most HP Pavilion notebook computers have a switch that allows you to turn off the wireless adapter. The switch typically is located on the side of the computer or on the front. Ensure that the router and modem are plugged in and functioning. Ensure that the lights are illuminated on each device. Attempt to connect wirelessly using another computer, if possible, to test whether the connection problem is with the router or modem. Unplug the router and modem. Leave the power off for approximately 30 to 60 seconds, then turn them on again. Update the wireless network adapter driver using the computer's "Device Manager." To access the Device Manager, right-click on "Computer" or "My Computer," depending on the version of Windows, and click "Device Manager" from the left-side bar, or from the tab labeled "Hardware." Once in the Device Manager, expand the section labeled "Networking Devices" and right-click on the wireless network adapter. Click "Update driver software" to begin searching for an update. If an update is found, follow the onscreen instructions to install the update. Reinstall the wireless networking adapter if updating the driver does not remedy the problem. To reinstall the wireless adapter driver, right-click on it from the Device Manager and select "Uninstall." Once the device is removed from the computer, restart the computer. Once Windows loads, it will automatically detect and reinstall the driver. Run the Windows 7 Diagnostic Tool (if the computer uses the Windows 7 operating system) to diagnose any networking issues the operating system may be able to correct. To access the Windows 7 Diagnostic Tool, open the "Start" menu and type "Network" into the search field. Click "Network and Sharing Center" and then select "Diagnose and repair" from the left-side bar. The Windows 7 Diagnostic Tool will automatically run and will attempt to repair and establish the wireless connection. Attempt to manually connect to the wireless network. Open the "Network and Sharing Center" and click "Setup a new connection or network." Enter the network name, security type and network key into the text boxes and click "Next." If successful, click "Use the existing network" and then click "Connect." The network name, security type and network key can be obtained from the network administrator or by logging into the router. For help logging into the router, consult the instructions included with the router. Make sure you Ethernet/internet is enabled in bios restart your computer during the boot up process you will see on your screen a certain key to press to enter set up (BIOS) press and hold that key to enter bios using arrow keys navigate to integrated peripherals look for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its "Enabled"imake sure key scroll Hope this helps.
http://support.microsoft.com/

Jan 03, 2013 | HP Pavilion G7-2118NR Notebook

1 Answer

How to connect laptop (using internal wireless adapter) to a wireless network)


Make sure you have the correct Password exactly like it should be (case sensitive). If it is not correct, it will continue in the loop of trying to validate identity.

Also you can click Start/Control Panel/Network Connections then Right Click on the Wireless Connection and select Properties.

When the properties window opens click View Available Wireless Networks. Highlight your network by clicking on it then select Properties.

The Association tab will allow you to change the Network Authentication to WPA2-PSK if it is not set to that and if the adapter will accommodate it. And you can put in the Network Key or Password.

May 05, 2012 | HP Compaq Presario V2000 Notebook

1 Answer

Can not connect to my wireless router


1. Choose your wireless equipment The first step is to make sure that you have the equipment you need. As you're looking for products in stores or on the Internet, you might notice that you can choose equipment that supports three different wireless networking technologies: 802.11a, 802.11b, and 802.11g. We recommend 802.11g, because it offers excellent performance and is compatible with almost everything.
Shopping list
  • Broadband Internet connection
  • Wireless router
  • A computer with built-in wireless networking support or a wireless network adapter
A wireless router
The router converts the signals coming across your Internet connection into a wireless broadcast, sort of like a cordless phone base station. Be sure to get a wireless router, and not a wireless access point.
A wireless network adapter
Network adapters wirelessly connect your computer to your wireless router. If you have a newer computer you may already have wireless capabilities built in. If this is the case, then you will not need a wireless network adapter. If you need to purchase an adapter for a desktop computer, buy a USB wireless network adapter. If you have a laptop, buy a PC card-based network adapter. Make sure that you have one adapter for every computer on your network.
Note: To make setup easy, choose a network adapter made by the same vendor that made your wireless router. For example, if you find a good price on a Linksys router, choose a Linksys network adapter to go with it. To make shopping even easier, buy a bundle, such as those available from D-Link, Netgear, Linksys, Microsoft, and Buffalo. If you have a desktop computer, make sure that you have an available USB port to plug the wireless network adapter into. If you don't have any open USB ports, buy a hub to add additional ports.
2. Connect your wireless router Since you'll be temporarily disconnected from the Internet, print these instructions before you go any further.
First, locate your cable modem or DSL modem and unplug it to turn it off.
Next, connect your wireless router to your modem. Your modem should stay connected directly to the Internet. Later, after you've hooked everything up, your computer will wirelessly connect to your router, and the router will send communications through your modem to the Internet.

  • If you currently have your computer connected directly to your modem: Unplug the network cable from the back of your computer, and plug it into the port labeled Internet, WAN, or WLAN on the back of your router.
  • If you do not currently have a computer connected to the Internet: Plug one end of a network cable (included with your router) into your modem, and plug the other end of the network cable into the Internet, WAN, or WLAN port on your wireless router.
  • If you currently have your computer connected to a router: Unplug the network cable connected to the Internet, WAN, or WLAN port from your current router, and plug this end of the cable into the Internet, WAN, or WLAN port on your wireless router. Then, unplug any other network cables, and plug them into the available ports on your wireless router. You no longer need your original router, because your new wireless router replaces it.
  • 3. Configure your wireless router
  • Using the network cable that came with your wireless router, you should temporarily connect your computer to one of the open network ports on your wireless router (any port that isn't labeled Internet, WAN, or WLAN). If you need to, turn your computer on. It should automatically connect to your router.
    Next, open Internet Explorer and type in the address to configure your router.
    You might be prompted for a password. The address and password you use will vary depending on what type of router you have, so refer to the instructions included with your router.
    As a quick reference, this table shows the default addresses, usernames, and passwords for some common router manufacturers.
    Router
    Address
    Username
    Password
    3Com
    http://192.168.1.1
    admin
    admin
    D-Link
    http://192.168.0.1
    admin

    Linksys
    http://192.168.1.1
    admin
    admin
    Microsoft Broadband
    http://192.168.2.1
    admin
    admin
    Netgear
    http://192.168.0.1
    admin
    password

    Internet Explorer will show your router's configuration page. Most of the default settings should be fine, but you should configure three things:
    1. Your wireless network name, known as the SSID. This name identifies your network. You should choose something unique that none of your neighbors will be using.
    2. Wireless encryption (WEP) or Wi-Fi Protected Access (WPA), which help protect your wireless network. For most routers, you will provide a passphrase that your router uses to generate several keys. Make sure your passphrase is unique and long (you don't need to memorize it).
    3. Your administrative password, which controls your wireless network. Just like any other password, it should not be a word that you can find in the dictionary, and it should be a combination of letters, numbers, and symbols. Be sure you can remember this password, because you'll need it if you ever have to change your router's settings.
    The exact steps you follow to configure these settings will vary depending on the type of router you have. After each configuration setting, be sure to click Save Settings, Apply, or OK to save your changes.
    Now, you should disconnect the network cable from your computer.
    4. Connect your computers to the wireless network If your computer does not have wireless network support built in, plug your network adapter into your USB port, and place the antenna on top of your computer (in the case of a desktop computer), or insert the network adapter into an empty PC card slot (in the case of a laptop). Windows will automatically detect the new adapter, and may prompt you to insert the CD that came with your adapter. The on-screen instructions will guide you through the configuration process.






Mar 24, 2010 | HP Pavilion dv9000z Notebook

2 Answers

Error code 3600:0749 battery will not charge


-check the system battery information and charger information of the computer; restart the computer, while the computer is booting up, press F2 repeatedly; check "battery info"
-if it stated ac adapter = unknown device ; update the BIOS (-visit support.dell.com
-click on drivers and downloads
-click or choose by service tag
-download the BIOS and install it on the computer)
-check information after updating; if same message AC adapter = unknown device; call manufaturer for a replacement AC adapter, if status has changed it is a battery problem or motherboard, contact manufacturer to test battery

Oct 02, 2009 | Dell Inspiron 1501 Notebook

2 Answers

Acer aspire 9410, cannot connect to the internet using dial-up


You have two different devices here. A modem and a wireless network adapter. Two totally different devices. It sounds like the modem quit working but the wireless network adapter still functions. I'm assuming that the modem is built it. If you absolutely have to have it you could buy a PCMCIA modem if your laptop has a PCMCIA slot to plug it into. You could also have a corrupted modem driver.

Oct 01, 2009 | Acer Aspire One PC Notebook

2 Answers

Wireless adapter not functioning-


Do the following :
  1. Turn Laptop off, then disconnect adapter and remove battery. Re assemble and restart.
  2. Try clicking the button activating the wireless card.
  3. Reinstall wireless card drivers, select drivers from Compaq Presario V6205NR Notebook PC
  4. If all that did not work, then the internal adapter is faulty. Buy an external wlan adapter:WLAN Adapter WL-167G-£12.90 new





Sep 26, 2009 | Compaq Presario Notebook

1 Answer

I have an old hp laptop and a cable modem internet connection currently on a new computer. how do i go about configuring the internet connection from one computer to the other?whenever i plug the modem...


OUR YOU TRY TO CONNECT BOTH LABTOPS TOGETHER TO TRANSFER THE INFORMATION.

THE CABLE MODEM HAS AWAY TO CONNECT TO THE NEW PC.

YOU NEED TO CONTACT YOUR INTERNET PROVIDER AND EXPLAIN YOU HAVE OLD CABLE MODEM AND YOU WANT TO UPGRADE TO THE NEW EQUIPMENT SETUP BUNDLE, THEY WILL SEND YOU A BOOK, CDROM OR DVD, THAT WILL TALK YOU THREW THE NEW PROCIDURES OF HOOKING UP THE NEW SYSTEM.

THE NEW AND OLD SYSTEMS ARE NOT COMPATIBLE IN ANY SINCE BECUASE THE WINDOWS VERSIONS, UPGRADES, SERVICE PACKS, WHAT THE SPEED IS, AND IF YOU HAVE 16BIT, OR 32BIT OR 64BIT SYSTEM, THERE ARE SOME 8BIT SYSTEMS BUT I HAVENT SEEN ONE IN A LONG TIME.

RODGANDYSR

Mar 10, 2009 | HP Pavilion dv6000z Notebook

1 Answer

Dell inspiron E1505 cannot connect to internet


A hardware error usualy indicated a bad network cable or a bad network card. Have you tried using a different Cable?

Mar 04, 2009 | Dell Inspiron 1501 Notebook

1 Answer

Power


1.
.
Connect your wireless router
Since you'll be temporarily disconnected from the Internet, print these instructions before you go any further.
First, locate your cable modem or DSL modem and unplug it to turn it off.
Next, connect your wireless router to your modem. Your modem should stay connected directly to the Internet. Later, after you've hooked everything up, your computer will wirelessly connect to your router, and the router will send communications through your modem to the Internet.
efefddd.jpg Next, connect your router to your modem:

If you currently have your computer connected directly to your modem: Unplug the network cable from the back of your computer, and plug it into the port labeled Internet, WAN, or WLAN on the back of your router.
If you do not currently have a computer connected to the Internet: Plug one end of a network cable (included with your router) into your modem, and plug the other end of the network cable into the Internet, WAN, or WLAN port on your wireless router.
If you currently have your computer connected to a router: Unplug the network cable connected to the Internet, WAN, or WLAN port from your current router, and plug this end of the cable into the Internet, WAN, or WLAN port on your wireless router. Then, unplug any other network cables, and plug them into the available ports on your wireless router. You no longer need your original router, because your new wireless router replaces it.
5641429.jpg Next, plug in and turn on your cable or DSL modem. Wait a few minutes to give it time to connect to the Internet, and then plug in and turn on your wireless router. After a minute, the Internet, WAN, or WLAN light on your wireless router should light up, indicating that it has successfully connected to your modem.



3.
Configure your wireless router
8d8f1b2.jpg Using the network cable that came with your wireless router, you should temporarily connect your computer to one of the open network ports on your wireless router (any port that isn't labeled Internet, WAN, or WLAN). If you need to, turn your computer on. It should automatically connect to your router.
Next, open Internet Explorer and type in the address to configure your router.
You might be prompted for a password. The address and password you use will vary depending on what type of router you have, so refer to the instructions included with your router.
As a quick reference, this table shows the default addresses, usernames, and passwords for some common router manufacturers.
Router Address Username Password 3Com
http://192.168.1.1
admin
admin
D-Link
http://192.168.0.1
admin
ts.gif Linksys
http://192.168.1.1
admin
admin
Microsoft Broadband
http://192.168.2.1
admin
admin
Netgear
http://192.168.0.1
admin
password
Internet Explorer will show your router's configuration page. Most of the default settings should be fine, but you should configure three things:
1.
Your wireless network name, known as the SSID. This name identifies your network. You should choose something unique that none of your neighbors will be using.
2.
Wireless encryption (WEP) or Wi-Fi Protected Access (WPA), which help protect your wireless network. For most routers, you will provide a passphrase that your router uses to generate several keys. Make sure your passphrase is unique and long (you don't need to memorize it).
3.
Your administrative password, which controls your wireless network. Just like any other password, it should not be a word that you can find in the dictionary, and it should be a combination of letters, numbers, and symbols. Be sure you can remember this password, because you'll need it if you ever have to change your router's settings.
The exact steps you follow to configure these settings will vary depending on the type of router you have. After each configuration setting, be sure to click Save Settings, Apply, or OK to save your changes.
Now, you should disconnect the network cable from your computer.
4.
Connect your computers
If your computer does not have wireless network support built in, plug your network adapter into your USB port, and place the antenna on top of your computer (in the case of a desktop computer), or insert the network adapter into an empty PC card slot (in the case of a laptop). Windows XP will automatically detect the new adapter, and may prompt you to insert the CD that came with your adapter. The on-screen instructions will guide you through the configuration process.
Note: The steps below only apply if you're using Windows XP Service Pack 2. If you're running Windows XP and you don't have Service Pack 2 yet, plug your computer into your wireless router and download and install Windows XP Service Pack 2.
Windows XP should show an icon with a notification that says it has found a wireless network.
5118333.gif Follow these steps to connect your computer to your wireless network:
1.
Right-click the wireless network icon in the lower-right corner of your screen, and then click View Available Wireless Networks. If you run into any problems, consult the documentation that came with your network adapter. Don't be afraid to call their tech support.
2.
The Wireless Network Connection window should appear and you should see your wireless network listed with the network name you chose. If you don't see your network, click Refresh network list in the upper-left corner. Click your network, and then click Connect in the lower-right corner.5914228.gif 3.
Windows XP prompts you to enter a key. Type the encryption key that you wrote down earlier in both the Network key and Confirm network key boxes, and then click Connect.
4.
Windows XP will show its progress as it connects to your network. After you're connected, you can now close the Wireless Network Connection window. You're done.
Note: If the Wireless Network Connection window continues to show Acquiring Network Address, you may have mistyped the encryption key.

Jul 03, 2008 | Acer Aspire 5100 Notebook

2 Answers

Cannot maintain wireless connection


Try manually add the network. If the problems continue, I would turn the laptop in for repair/replacement (if it under warranty).

May 15, 2008 | HP Pavilion dv9730us Notebook

Not finding what you are looking for?
HP Pavilion dv9000z Notebook Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...