Question about Insignia Car Audio & Video

1 Answer

I have installed an overhead DVD player Insignia NS-D9500. It only works when the door is opened. It turns off when the car door is closed. Did I wire wrong somewhere?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 819 Answers

You have wired your power into the door switch circuit, you need to find switched power from the ignition such as the radio feed to splice for power to your unit.

Posted on Sep 01, 2010

  • Choua Vu
    Choua Vu Sep 02, 2010

    I switched the powers but still doing the same

  • 10zoomer Oct 22, 2010

    you need to see if the door light has a switch. if it does you need to wire the dvd player on the hot side of the switch. the only time there is power on the dvd player now is when you open the door the power flows. if there is not a switch you have to fine 12 volts that is hot all the time. the best way to wire is when you turn key on then you have 12 volts. hope this was useful

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A DVD INSIGNIA NS-PDVD8.DVD DOOR IS BROKEN.


Hi! the brand of your unit hails from china under xoceco.

Sep 15, 2009 | Insignia NS-PDVD8 Portable DVD Player

1 Answer

Insignia NS-MVDS7/9 - unlock code


This information was found on the following website http://www.videohelp.com/dvdhacks/insignia-ns-7dpdvd/8394 It is dated as working on 01-08-08. I hope this information help you with your problem. 1.- Power on with no DVD inside the player; 2.- Press open on the DVD player; 3.- Press Menu button on DVD (or SETUP on remote control), (you see General Setup Page on the screen); 4.- Press the right key 3 times to select the Preference Page; 5.- On the remote control press 9653; 6.- Use the up and down key to select the Region, Select 0 for all regions; 7.- Press Enter. (This works with NS-7PDVD and NS-8PDVD)

Dec 18, 2008 | Insignia NS-8PDVD

1 Answer

Remote Control for NS-M10OHD Insignia Mobile DVD Player


Hi elie97,
I have the same problem, I have found an OEM replacement at www.newremotecontrol.com $17.95, you need to go to the insignia latest remotes section,
Regards

Sep 26, 2008 | Car Audio & Video

2 Answers

Portable dvd player insignia ns-pdvd10 screen problem


Check the screen switch on the right top side where the door closes there is a little circle and the release switch usually gets jammed (this is a common defect) you will need a small thin flat head screwdriver to pry out the switch.

Jun 18, 2008 | Insignia IS-PDVD10 Portable DVD Player

1 Answer

Insignia NS 9500 9


hook your yellow thats your constent power wire to a constent power source when the car is on. the red is your acc hook it up as well then ground your black wire that should work cuz all your goin to do is just hook it up befor u mount it.

May 29, 2008 | Insignia Car Audio & Video

2 Answers

I just bought a insignia overhead video player ns-d9500, i want to use it in my mini van with wireless head sets 4 of them probably can you tell me what i need to do to make this work for me


Bought the head sets went to circuit city asked the guy who puts the dvds into cars how it would work i just turned it on and it was fixed

May 19, 2008 | Insignia Televison & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4844 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Are you an Insignia Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...