Question about Delta 16955-SSSD Stainless Steel Victorian Single Handle Kitchen 16955-SSSD

1 Answer

Installed Delta 16955-SSSD Stainless Steel Victorian Single Handle Kitchen 16955-SSSD a couple months ago. About a couple weeks ago experienced low flow for about 4 hours then started working fine. Now have low flow for about 3 days. I have cleaned the screen and it didn't fix problem. Other water pressure in the house is fine. Any suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 119 Answers

Remove spay head from the end of the sprayer hose and turn the water on. If you have good pressure without the head, call Delta and ask for a new spray head. If you still have low water pressure without the spray head attached, call Delta and ask for a new ceramic disc cartridge free.

Posted on Sep 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Faucet works sporadically even thought solenoid is disconnected


You are saying that the water comes on by itself? What water pressure do you have?

Apr 08, 2016 | Delta Pilar Pull-Down Single Handle...

1 Answer

Delta faucet #467-DST. The last couple of weeks my kitchen faucet doesn.t want to turn back and forth easily. I thought it might be a kink in the sprayer hose. Help


There are two rubber o rings under the spout, one at the top and one on the bottom, Remove the handle then the nut that you will see that is in contact with the spout. Rock the spout left to right and pull up at the same time. You then can replace the O rings and make sure you put some food grade lub on the O rings. Replace all that you took off and you are god to go.

best of luck Rich

Sep 05, 2011 | Delta Faucet Delta 467-SSSD-DST Palo...

1 Answer

I think that the aerator/water restrictor is clogged. The water comes out like a snakes tongue. I cannot figure out how to remove and clean it. It is a Delta kitchen faucet #417-SSwf. Thank you...


there should be a special wrench that came with the faucet. i have included a link to a web site that has a parts breakdown for the faucet. it shows the wrench and how it all comes apart. about in the middle it says additional info. there is the parts diagram link.
http://www.faucet-warehouse.com/Delta/talbott/single-handle/stainless-steel/417-ss-dst

Jun 22, 2011 | Delta 417SSWF Talbott Stainless Steel...

1 Answer

Delta 467sssd hard to turn


there may be under the handle is a crown nut + a plastic collar which holds down the inards there is a tool that works this. it can be gotten at hardware store.. handle usely comes off w/ 1/8 allen wrench...

Mar 31, 2011 | Delta Faucet Delta 467-SSSD-DST Palo...

1 Answer

I have a Delta kitchen faucet model #467-SSSD-DST. The cold water flow and/or pressure is not adequate. The flow and pressure from the hot water side is fine. What may I do to fix my cold water problem?


Hi,
Take the handle off (set screw underneath)
Then turn the top off under the handle....make sure water is off...
then you will find a ball with the handle stem on it....note the position of it and pull it out...
under there are two wets of springs and rubber seats...
pull the right side out and check the hole for a blockage...(dirt or rust)
if none is visible, you may have to unhook the cold water supply hose
and then blow compressed air back through the hole to remove the blockage...
then reassemble...

heatman101

Mar 20, 2011 | Delta Faucet Delta 467-SSSD-DST Palo...

1 Answer

Delta Faucet Company 467-SSSD-DST Palo Diamond Seal Technology Pull-out Kitchen Faucet, Stainless, 3 years old and is beginning to drip unless we position the handle just right. Is there a washer? I've...


I hope this will help please go to this web site for a downloadable parts link. If it is leaking from the spout replace the seats and springs to correct the problem. Turn water off and remove handle with a 1/8" allen wrench and remove retaining collar to access the ball assembly to remove the seats and springs.

The parts page on this link will give you a break down and hope this will help.

http://www.deltafaucet.com/kitchen/details/467-SSSD-DST.html

Dec 30, 2010 | Delta Faucet Delta 467-SSSD-DST Palo...

1 Answer

Swing arm too loose


What I have doen in the past is to take the compression nut off. Wrap teflon plumbing thread tape around and between the two o rings and tinghened the compression nut back down,tightening the worn swing arm joint.

Mar 11, 2009 | Delta 16955-SSSD Stainless Steel Victorian...

Not finding what you are looking for?
Delta 16955-SSSD Stainless Steel Victorian Single Handle Kitchen 16955-SSSD Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Delta Plumbing Experts

Donni Steen

Level 3 Expert

659 Answers

Ed Mac

Level 3 Expert

731 Answers

bwbconstruct

Level 1 Expert

23 Answers

Are you a Delta Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...