Question about Washing Machines
E03 indicates the appliance isn't draining quickly enough, or, doesn't know that it's drained.
The first part would be restrictions in the sump hose, pump, drain hose or house drains.
It could also be a faulty pump.
You would need to check all of these parts to ensure it's all clean and clear.
The second part would suggest that there is debris in the pressure chamber causing intermittent blocking.
Unplug the appliance and take the rear panel off.
You'll see a plastic fitting in the sump hose with a thin tube attached to it.
This is the pressure chamber, take it out and clean out the pressure chamber.
For getting required parts you can get it from the online site like www.repairclinic.com Thanks. keep updated for any more query.you can rate this solution and show your appreciation.
Posted on Aug 31, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 25, 2015 | Hoover Washing Machines
Feb 07, 2015 | Kenmore Elite Oasis 27052 Top Load Washer
Nov 30, 2014 | Candy Washing Machines
May 04, 2014 | Maytag Maxima EcoConserve Series MED6000XW
Dec 13, 2012 | Washing Machines
Hi smckay5 - Typically error code E03 indicates that there is a failure with either wash motor or motor hall sensor. I suggest checking for suds in tub and siphoning. A further diagnose is recommended to have a professional check the wiring between motor and main control board since either part would need replacing.
Nov 13, 2012 | Electrolux EWDW6505GS Fully Integrated...
Dec 31, 2010 | Washing Machines
Aug 22, 2017 | Zanussi Washing Machines
605 people viewed this question
Usually answered in minutes!