Question about PC Desktops

2 Answers

I have installed an LG GSA-H55L burner with Lightscribe Have down loaded the driver from LG but when I try to burn a Lightscribe disc (gold side down )I gat this message. No drive found.I have tried Nero and SureThing with same results.

Posted by on

  • valandpete May 10, 2008

    The drive is ok it will copy and burn CD/DVD disc's

    On checking the drive on Nero it said Lightscribe not supported.

    Regards

    Peter Dickson

  • valandpete May 11, 2008

    I have found the problem.

    When I checked the rewriter on Nero it said the drive is not supported for Lightscribe,but it came boxed as a Lightscribe

    writer. I am sending it back for replacement or refund.

    I had already done all what you sujested.

    Many thanks for trying to help.

    Regards

    Peter Dickson

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 859 Answers

You need to download the LSS (Lightscribe System Software) from
http://www.lightscribe.com/DownloadSection/windows/index.aspx
and install it. It doesn't install automatically with your disc driver. This link is for XP which I assume you have.

Once you install the software, it will place an Icon on your desktop for the Lightscribe Progrram. Double click that icon and you will find the rest easy.

One note, the default font size is rather small so don't be too surprise if your first label disappoints you.

Posted on May 11, 2008

  • Glenn Rogers
    Glenn Rogers May 11, 2008

    Too bad. Basically, if you don't see the lightscribe logo on the drive door its not supported. Sorry, for your troubles.

×

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 21 Answers

Try entering your bios and check that the drive is recognised.

Posted on May 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is LightScribe System Software? The InstallWizard for LightScribe System software has appeared on my HP62-222US notebook. Should I click next?


Yes, let it install. Your laptop has the capability of taking light-scribe CDs and DVDs you can buy at Best Buy or other places and you can learn to use the software to burn cool stuff on the discs you make.

After you burn something to one of those discs, you open the drive, flip the disc over and use light scribe to burn titles, info and graphics right on the disc.

Gotta love it!

Sep 05, 2010 | PC Desktops

1 Answer

I've had this Hp dvd 1070 with lightscribe for about a year now and MOST of the burned discs 'glitch-up' after half to three quarters of an hour on, basically, all other players. Could you, at least, give...


Hello

Thank you for using FixYa for your problem


So any program you use to burn DVD's fails, sounds like the burner or a driver isure. What OS and are the updates done, is there a update for lightscribe

Please rate our solutions and if you still have problems please call back for more ideas to help you

Thanks
Richard Scott
Technical Support
New Zealand

Dec 22, 2009 | HP dx2400 NV390UT Desktop PC - Intel...

1 Answer

Dvdram gsa-4165b driver


click on this link and fallow the directions in installing the driver: http://drivers.softpedia.com/get/FIRMWARE/LG/LG-GSA-4165B-DL05.shtml

Apr 26, 2009 | PC Desktops

1 Answer

GSA-T40L Lightscribe Error


Try a firmware upgrade by downloading it from the internet but make sure the serial numbers match exactly. If that fails then it my need replacing.

Jan 09, 2009 | PC Desktops

1 Answer

How to burn cd on hp desktop with lightscribe


Burning a CD on hp desktop with lightscribe is like buring CD without lightscribe. Lightscribe is just a feature of the DVD and/or CD Burner you have.

If need a beginners guide to burning CDs and/or DVDs check this out: http://www.pcstats.com/articleview.cfm?articleID=742

Aug 18, 2008 | PC Desktops

1 Answer

LightScribe will not burn on cds,we cannot find any step by step instructions telling us how to do it.


You have to have an application to use the LightScribe function; Nero Burning ROM and a bunch of others can do it, including some standalone apps. In the burning application, just create a volume with a LightScribe label, and it will prompt you to take a burned CD and flip it top-down in the burner for labeling. If you run some standalone app, it will have you do the same thing once your design is saved...and you tell it to go to work (or you can send to a print driver which just happens to be the lightscribe application.)
There's a huge difference in design complexity allowed between various applications; be sure and get one that suits you best. Try VersionTracker as an application catalog if you like.

May 11, 2008 | PC Desktops

2 Answers

Dell Inspiron 530 DVD Burner Issue


i have a dell inspiron 530 and i have a slideshow movie business that i operate from my pc i have nothing special other than what came with computer!! anyone that needs help with burning i can help. i am on kudzu.com under memories my name is george

Apr 06, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...