Question about YouTube Videos

1 Answer

My youtube is stopping and starting & it is stalling?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 629 Answers

This is normal with streaming videos. This is the buffering process where the video stream is downloaded, when it starts again, the downloaded stream is being played. If this frequently happens, it would mean your connection is not that fast. May help to clean browsing history, then get a faster internet connection, otherwise, when you play a youtube video, click pause and let it buffer for a while, when the buffer indicator has reached more than half or has completed, you can then play the video continuously.

Posted on Aug 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1991 geo metro lsi convertiable i started it when i came to a stop and it stalled wont start. Inflate reset light stays on what is wrong with car.


inflate?
does it crank, that is first,
G10 engine 3 cyl or 4.?
stalls do have over 50 causes, ill not try to guess.
but most stalls , are not getting tuneup,"spark plugs top that list"
or EGR valve stuck open

here watch scotty.
this is what we do.
he has over 200 vids, all good.


https://www.youtube.com/watch?v=064Ilsz8Fzg&NR=1&feature=fvwp

May 25, 2016 | Geo Cars & Trucks

1 Answer

My 96 Ford windstar was running just died in the middle of the street I bought a computer thinking that was the problem it cranks but won't fire


Ford Windstar Starting/Stalling Problems - Edmunds.com

forums.edmunds.com > Ford > Ford Windstar

Oct 16, 2007 - 31 posts - ‎26 authors
Learn more about Ford Windstar at the Edmunds.com Car Forums! ... Then on Friday it died while I was driving down the street. ... I have a 3.8L v6 1996 Ford Windstar. .... Then yesterday the car just died while driving and had to be towed back to .... The engine will crank, start run about 5 seconds then stop.

Fixing A Car That Randomly Dies While Driving - YouTube

? 3:59
https://www.youtube.com/watch?v=zwlruD4JXmY
Jul 20, 2010 - Uploaded by Scotty Kilmer
Fixing A Car That Randomly Dies While Driving. Scotty Kilmer ...Just check it out at https://www.youtube.com ...

2002 Ford Windstar Engine Stalls/Shuts Down While Driving ...

www.carcomplaints.com/Ford/Windstar/.../engine_stalls_shuts_down_wh...
The 2002 Ford Windstar has 11 complaints for engine stalls/shuts down while driving. ... 2002 Windstar just starting shutting off in the middle of driving. ... The engine diesupon acceleration and will crank but won't start unless switch is ... Inspected the Fuel Pump shut-off Switch, Fuel Filter, Run several full tanks of gas ...

Jan 26, 2016 | Ford Cars & Trucks

1 Answer

Hard stating flooding


Search Results

    Rider mower carburetor flooding - help ! - YouTube

    ? 1:30
    https://www.youtube.com/watch?v=ZYqtKvLXYtY
    Sep 29, 2010 - Uploaded by Joyce Boncal
    It won't start. ... Rider mower carburetor flooding - help ! .... ( HOW TO ADJUST VALVES) FIX HARD TO START Lawn Tractorwith OHV Briggs ...

    How to stop a Briggs crankcase from flooding with gas Order ...

    ? 11:34
    https://www.youtube.com/watch?v=VhEiLMtPR5M
    Aug 5, 2013 - Uploaded by doublewide6
    If your tractor keeps leaking gas into the crankcase see how you can fix the problem by ... The hard starting is caused by fuel filling the cylinder.

    Basic Troubleshooting - Lawn & Garden Tractors - Cub Cadet

    cubcadet.custhelp.com/.../basic-troubleshooting---lawn-%26-garden-tract...
    Sep 13, 2002 - Engine fails to start, Engine flooded, Crank engine with throttle in FAST... Engine runs erratic or stalls, Tractor running with CHOKE activated ...


Jan 25, 2016 | Garden

1 Answer

Why it stalls at stops and low speeds


accord stalling on every stop. (1/2) - EricTheCarGuy ...

www.ericthecarguy.com/.../8.../46884-accord-stalling-on-every-stop
The car runs good but stalls every time i come to a stop. ... a stop then it diesagain.only on the stops does the idle drop very low to the point of stalling.what ... only when I start slowing down and come to a complete stop RPM's go down and the cardies. ... The popular Honda Civic and Accord vehicles share many powertrain ...

1998 Honda Accord loses rpm/ stalls coming to a stop ...

honda-tech.com/honda-accord.../1998-honda-accord-loses-rpm-stalls-co...
Jan 10, 2013 - I just bought a 1998 4 cyl 2.3 L Honda Accord two days ago. ... 1998Honda Accord loses rpm/ stalls coming to a stop. .... Is clockwise high idle or low idle? all in all i probable rotated counterclockwide 1.5 or 2 turns. maybe this ...

1999 Accord, 130k+, stalls when slowing to a stop - Honda Accord ...

www.hondaaccordforum.com > ... > General > General Tech Help
Mar 10, 2010 - My fiancee's '99 Accord EX Coupe 4-cylinder automatic, with 130,000+ miles, has recently (in .... No low RPM & feeling like it's GOING TO stall.

99 Honda Accord - Strange Stalling Issues! HELP!

https://www.2carpros.com/.../1999-honda-accord-99-strange-stalling-issu...
My 1999 Honda Accord is having sporadic stalling problems. I've noticed a pattern. Itstalls while going slow speeds and stop and go traffic, etc. The engine just ...

Stalling or Low Engine Idle Speed Due to Dirty ... - Repair


Jan 02, 2016 | 1999 Honda Accord

1 Answer

When I start my 1996 Honda accord the engine seems to sputter rpm gauge revs up on its own and spits and sputters as I'm driving down the road


My sputtering & stalling 1993 Honda Accord - YouTube

? 2:12
https://www.youtube.com/watch?v=Ki2H9aq8Xis
Jun 23, 2011 - Uploaded by mdpbfly
My sputtering & stalling 1993 Honda Accord ... 1996 Acura Integra, hesitation accelerating & misfire. ... 1993 Honda Accord Start Up and Review 2.2 L 4-Cylinder ... SIR B16A Engine sputter/ power loss at higher RPM - Duration: 1:14. by ... 1994 Honda Civic Check Engine Light Code Retrieval Tutorial ...

All comments on How To Solve Honda Idle Problems ...

https://www.youtube.com/all_comments?v=L788jKEVblY
What should I do if once I turn on my Ac my idle drops as if it's gonna die, and .... to a complete stop the rpms start going up and the car accelerates on its own. ... Honda Accord LX, and my Honda just started sputtering in idle. check engine .... My cousin replaced my radiator on my 90 civic and since then my temp gauge is ...

Acceleration Bog/Sputter/Hesitation - Honda-Tech

honda-tech.com/honda-accord.../acceleration-bog-sputter-hesitation-279...
Jun 11, 2010 - 1990 Honda Accord Ex F22 209000 miles, recent alternator change When I ... When I take off from a stoplight I get a little hesitation/bogging/sputteringfeeling until about 2,000 RPM then ... My 1999 Accord had a similar problem (F18B2engine). ... It only lasted a second or so before it would actually rev up.


Dec 28, 2015 | Honda Cars & Trucks

2 Answers

Rough idle & stalling at a stop


This maybe due to a dirty Idle Air control valve or a throttle position sensor. YouTube can provide good answers for removal and testing of the Throttle Positon Sensor (TPS) as well as cleaning the Idle Air Control Valve (IAC)

Aug 19, 2014 | 2005 Suzuki Forenza

1 Answer

I recently purchased a Horizon Quantum HRC 2 treadmill which was working fine at the sellers house. I transported it home, started it up and it worked for a few seconds, I stopped it and then the belt...


If the Drive Belt is Not Moving :

Watch this video:

http://www.youtube.com/watch?v=GdlAxZHLDys&feature=related
http://www.youtube.com/watch?v=bF3OyQ3HwfU&feature=related
http://www.youtube.com/watch?v=-oeXTKqWECw&feature=related
http://www.youtube.com/watch?NR=1&v=KiEZDNe0F8Q
http://www.youtube.com/watch?v=hKbAqvuOBS0&feature=related
You should not adjustthese since they are preset. Tension can be affectedslightly by adjusting the tension of the walking belt but if you have a slippingproblem, the drive belt will require replacement. If yourdrive belt is too loose, it will slip on the front roller pulley or the motorpulley. If it is too tight, it will increase your amp draw to the point thatyou may have an electronics or motor problem. Due to this, it is better to beon the safe side and replace a drive belt rather than riskover tightening it. A drive belt is usually $29.99 or less while many parts youcan damage by over tightening can be more than $300.Additionally, too much tension can cause bearing failure in the motor and thefront roller and front roller pulley failure. It is better to err onhaving the belt a little too tight rather than too loose due to the possibilityof injury if the belt slips. Motor Belt Adjustment-Icon Units Do not remove any of themounting bolts to the motorthese repairs will require 2 9/16" wrenches andmayrequire two people to accomplish the repairs Before beginning this repair: Check to make certain that the drive belt requiresadjustment. Check out belt slipping instructions or with the motor cover removed,walk on the belt normally and try to stall the belt to make it slip. Be careful during this test. If theproblem is in the drive belt, eitherthe drive belt will stop when stalled or the front roller will stop whenstalled. If the motor, drive belt, and front roller continue to turn when thewalking belt is stalled, the problem is with the walking belt slipping on thefront roller. If the drive belt continues to turn but the frontroller stalls, you may have a broken front roller pulley.If You need further assistance, please reach me, sincerely. G-d Bless you.

E.CUADRA
MANAGUA,NICARAGUA. C.A.

Oct 28, 2011 | Exercise & Fitness

1 Answer

Treadclimber tc500 lights up won't turn belt


Dear Sir:

Please use the patience, carefully and basic tools+Dvom

Watch this videos:
http://www.youtube.com/watch?v=bF3OyQ3HwfU&feature=related
http://www.youtube.com/watch?v=-oeXTKqWECw&feature=related
http://www.youtube.com/watch?v=GPI6dFJCUA4
http://www.youtube.com/watch?v=GdlAxZHLDys&feature=related
You should not adjustthese since they are preset. Tension can be affectedslightly by adjusting the tension of the walking belt but if you have a slippingproblem, the drive belt will require replacement. If yourdrive belt is too loose, it will slip on the front roller pulley or the motorpulley. If it is too tight, it will increase your amp draw to the point thatyou may have an electronics or motor problem. Due to this, it is better to beon the safe side and replace a drive belt rather than riskover tightening it. A drive belt is usually $29.99 or less while many parts youcan damage by over tightening can be more than $300.Additionally, too much tension can cause bearing failure in the motor and thefront roller and front roller pulley failure. It is better to err onhaving the belt a little too tight rather than too loose due to the possibilityof injury if the belt slips. Motor Belt Adjustment-Icon Units Do not remove any of themounting bolts to the motorthese repairs will require 2 9/16" wrenches andmayrequire two people to accomplish the repairs Before beginning this repair: Check to make certain that the drive belt requiresadjustment. Check out belt slipping instructions or with the motor cover removed,walk on the belt normally and try to stall the belt to make it slip. Be careful during this test. If theproblem is in the drive belt, eitherthe drive belt will stop when stalled or the front roller will stop whenstalled. If the motor, drive belt, and front roller continue to turn when thewalking belt is stalled, the problem is with the walking belt slipping on thefront roller. If the drive belt continues to turn but the frontroller stalls, you may have a broken front roller pulley.If you need further assistance, please reach me.

Sincerely. God bless you.

E.CUADRA
MANAGUA, NICARAGUA.C.A

Oct 27, 2011 | Nordic Track Exercise & Fitness

1 Answer

My readmill stops in the middle of my workout. I can restart it in about 5 seconds...and it stops again ...feels like the belt is skipping, dragging, or something


Please see the next Videos:
http://www.youtube.com/watch?v=38w4PkiWIBY&feature=related
http://www.youtube.com/watch?v=yX_0vRPdMfU&feature=related
http://www.youtube.com/watch?v=wjrVjYe2LYQ&feature=related
http://www.youtube.com/watch?v=-oeXTKqWECw&feature=related
http://www.youtube.com/watch?v=GPI6dFJCUA4
You should not adjustthese since they are preset. Tension can be affectedslightly by adjusting the tension of the walking belt but if you have a slippingproblem, the drive belt will require replacement. If yourdrive belt is too loose, it will slip on the front roller pulley or the motorpulley. If it is too tight, it will increase your amp draw to the point thatyou may have an electronics or motor problem. Due to this, it is better to beon the safe side and replace a drive belt rather than riskover tightening it. A drive belt is usually $29.99 or less while many parts youcan damage by over tightening can be more than $300.Additionally, too much tension can cause bearing failure in the motor and thefront roller and front roller pulley failure. It is better to err onhaving the belt a little too tight rather than too loose due to the possibilityof injury if the belt slips. Motor Belt Adjustment-Icon Units Do not remove any of themounting bolts to the motorthese repairs will require 2 9/16" wrenches andmayrequire two people to accomplish the repairs Before beginning this repair: Check to make certain that the drive belt requiresadjustment. Check out belt slipping instructions or with the motor cover removed,walk on the belt normally and try to stall the belt to make it slip. Be careful during this test. If theproblem is in the drive belt, eitherthe drive belt will stop when stalled or the front roller will stop whenstalled. If the motor, drive belt, and front roller continue to turn when thewalking belt is stalled, the problem is with the walking belt slipping on thefront roller. If the drive belt continues to turn but the frontroller stalls, you may have a broken front roller pulley.
If you need further assistance, please reach me, sincerely. God bless you.

E.CUADRA
MANAGUA, NICARAGUA. C.A.

Oct 26, 2011 | Exercise & Fitness

2 Answers

1995 jaguar xj6 stalls once you stop at the stop signs


Look for an IAC sensor (motor) Idle Air Control.
Usually located on side & front of throttle body. Not 100% sure which type you'll have but if you have pintle type (pointed end) Remove it, spray it well with throttle body cleaner as well as port it came from, and retry. If it cures it temporarily & starts to do it again, replace it.

Aug 21, 2009 | 1995 Jaguar XJ6

Not finding what you are looking for?
YouTube Videos Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top YouTube Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Michael Terence...
Michael Terence...

Level 2 Expert

104 Answers

Mike

Level 3 Expert

4336 Answers

Are you a YouTube Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...